Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Low Volatile Organic Compounds (VOC) 190 g/L max.
- Cures quickly, typically less than an hour.
- Can be applied by roller, brush or airless spray equipment.
- Cured asphalt film meets ASTM D 41 requirements.
- Non-Asbestos
- Penetrates and seals dry felts, dusty surfaces and rusty metal.
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Application & Uses
Uses:
- Creates a bondable surface over aged BUR.
- Thoroughly penetrates and binds dusty, chalking surfaces.
- Improves adhesion over metal surfaces.
Applications:
- Ready to apply.
- Do not heat.
- Do not thin.
- Surface Preparation
All work surfaces should be in sound condition, free of dirt, debris, loose and/or embedded gravel, unattached coatings & membranes, and other contaminants that may interfere with a good bond.
- Application Directions
- Apply to the properly prepared surface at a rate of 1/2 to 3/4 gallon per square using a medium nap roller, brush or airless spray equipment.
- Drying time at 70°F and 50% relative humidity is approximately one hour to touch and 4 hours to recoat.
- Application Precautions
- Do not use on 100% rubber or plastic substrates.
- Do not use on products containing coal tar.
- Do not use where this product may come in contact with potable water.
- Do not thin.
- Do not freeze.
- Exterior use only.
- Clean Up
- Immediately rinse/flush equipment and tools with water after use.
- If the material has cured, clean with mineral spirits, exercising all flammable liquid precautions.
- Use waterless hand cleaner on the skin.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Weight Per Gallon | 7.9 - 8.1 | lbs. | D2939 |
Solids by Weight | 40 - 44 | % | D6511 |
Solids by Volume | 40 - 44 | % | D6511 |
Viscosity | 200 - 500 | cps | Brookfield RVT, # 3 Spindle |
pH | 8 - 10 | - | - |
Flash Point | min. 105 | °F | PMCC |
Drying Time (Touch, 70°F/50% R.H.) | 1.0 | Hour | - |
VOC | max. 190 | gm/liter | EPA Method 24A |
Regulatory & Compliance
- Compliance
Cured asphalt film meets ASTM D 41 requirements.
Packaging & Availability
- Packaging
- 5-gallon pails (42 lbs)
- 55-gallon drums (485 lbs)
Storage & Handling
- Shelf life
- 1 year (70°F, 50% R.H.)