Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Oil Type
- Linseed Oil
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Areas
Kulac LLN 30W/70 may be used in the formulation of architectural brush or roller applied decorative enamels, undercoats, primers and general industrial enamels.
- Suggested Usage
Kulac LLN 30W/70 is particularly suited to applications where its good durability, gloss and yellowing resistance are of benefit.
Properties
- Physical Properties
- Compatibility Characteristics
Solvents2
Alcohols Limited Aliphatics Compatible Aromatics Compatible Esters Compatible Ketones Compatible Other Film Formers2
Bodied Oils Compatible Chlorinated Rubber Limited Drying Oils Compatible Long Oil Alkyds Compatible Medium Oil Alkyds Compatible Short Oil Alkyds Limited Note:
1 Sample containing 0.05% Co and 0.5% Pb on resin solids reduced to 100 seconds Ford 4 with Aliphatic Solvent and applied at 75μ wet film thickness to glass panels after 16 hours maturation.
2 Compatibility characteristics are provided for guidelines only. Combinations should be thoroughly checked before use.
3 These parameters are provided for information purposes only and do not form part of the product specification.
Value | Units | Test Method / Conditions | |
Acid Value (On Solids) | max. 10 | mg KOH/g | - |
Clarity | Clear | - | - |
Color | max. 5 | - | Gardner |
Hard Dry¹ ³ | ± 4.0 | Hours | - |
Non-Volatile Content | 68 - 72 | % | - |
Oil Length³ | ± 63 | % | - |
Reduced Viscosity (55%)³ | W – Y | - | Gardner |
Solids (2 Poise)³ | ± 40 | % | - |
Touch Dry¹ ³ | ± 1.0 | Hours | - |
Viscosity (25°C) | Z4 - Z6 | - | Gardner |
Viscosity (25°C)³ | 100 - 200 | Poise | - |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Packaging & Availability
- Packaging Type
- Packaging
Kulac LLN 30W/70 is available in 190 Kg Net mild steel drums.
Storage & Handling
- Storage Stability
Kulac alkyd resins should be stored in a cool and dry position away from direct sunlight or other heat sources below 30°C. Under these conditions the resins will have a shelf life of one year. Kulac alkyds should additionally be stored and handled in accordance with local statutory regulations.