Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
- Structure
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Method
- Coating Type
- Uses
Parylene F is the best choice for:
Applications with higher temperature and UV requirements.
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Film Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Coefficient of Friction (static and dynamic) | 0.35 | - | - |
Hardness | R80 | - | Rockwell |
Young’s Modulus | 3.0 | GPa | - |
Young’s Modulus | 3 | GPa | - |
Tensile Strength | 55.0 | MPa | - |
Tensile Strength | 55 | MPa | - |
Yield Strength | 52.0 | MPa | - |
Yield Strength | 52 | MPa | - |
% Elongation to Break | 10 - 50 | % | - |
Elongation to Break | Oct-50 | % | - |
Elongation at Yield | 2.4 | % | - |
Density | 1.652 | g/cm³ | - |
Hardness (Rockwell) | R80 | R | - |
Coefficient of Friction (Static) | 0.35 | - | - |
Coefficient of Friction (Dynamic) | 0.39 | - | - |
Value | Units | Test Method / Conditions | |
Gas Permeability (Oxygen at 25°C) | 16.7 | cc*mm/m²*day*atm | - |
Penetration Power | 30 X | - | - |
USP Class VI Polymer | Yes | - | - |
Value | Units | Test Method / Conditions | |
Short Term Service Temperature (in oxygen environments) | 250 | °C | - |
Continuous Service Temperature (in oxygen environments) | 200 | °C | - |
Linear Coefficient of Thermal Expansion (at 25° C) | 45 | ppm/°C | - |
Thermal Conductivity (at 25° C) | 0.1 | W/m*K | - |
Melting Point | 435.0 | °C | - |
Melting Point | 435 | °C | - |
Short-term Service Temperature (Oxygen Environment) | 250.0 | °C | - |
Continuous Service Temperature (Oxygen Environment) | 200.0 | °C | - |
Linear Coefficient of Thermal Expansion (25° C) | 45.0 | ppm/°C | - |
Thermal Conductivity (25°C) | 0.1 | W/mK | - |
Value | Units | Test Method / Conditions | |
Oxygen gas permeability (25°C) | 16.7 | (ccxmm)/(m²xdayxatm) | - |
Value | Units | Test Method / Conditions | |
Dielectric Strength (25.4microns) | 276.0 | V/micron | - |
Dielectric Strength (0.001”) | 7000.0 | V/mil | - |
Volume Resistivity (23°C, 50% RH) | 1.1x10¹⁷ | ohm-cm | - |
Surface Resistivity (23°C, 50% Relative Humidity) | 4.7x10¹⁷ | ohms | - |
Dielectric Constant (60Hz) | 2.2 | - | - |
Dielectric Constant (1KHz) | 2.25 | - | - |
Dielectric Constant (1MHz) | 2.42 | - | - |
Dissipation Factor (60Hz) | 0.0002 | - | - |
Dielectric Strength (at 0.001”) | 7 | KV/mil | - |
Dissipation Factor (1KHz) | 0.0002 | - | - |
Dissipation Factor (1MHz) | 0.008 | - | - |
Volume Resistivity (at 23°C, 50% RH) | 1.1x10¹⁷ | ohm-cm | - |
Surface Resistivity (at 23°C, 50% Relative Humidity) | 4.7x10¹⁷ | ohms | - |
Dielectric Constant (at 1MHz) | 2.42 | - | - |
Dissipation Factor (at 1MHz) | 0.008 | - | - |
Regulatory & Compliance
- Certifications & Compliance