Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
- Addition-curing
- Fast curing
- Low viscosity
- No shrinkage
- Two-component
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Making shrink-free molds with excellent reproduction accuracy.
- Reproduction Molding for Foundry, Arts and Handicrafts.
- Application Details
As a low-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4119 is extremely suitable for casting all common reproduction materials, particularly if accurate copies of models with pronounced undercuts are required. Perfect mold making material for very fast de-moldings.
Processing
- Mix components A and B in a ratio of 1:1.
- Important note: The platinum catalyst is contained in component A.
Caution:
- A and B components may only be used together if they have the same batch number.
Properties
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Low viscosity
- Low hardness
- Easy to meter and mix due to 1:1 ratio
- Short curing time at room temperature
- Translucent
- Non shrink cure
- Easy demolding
- Note
All cured properties are obtained after 24 hours at 23°C.
| Value | Units | Test Method / Conditions | |
| Demoldable | 35 | minutes | - |
| Mix Ratio | 1:1 | parts by weight | - |
| Pot Life (up to 100000 mPa.s) | 7 | minutes | - |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | min. 400 | % | ISO 37 |
| Shore Hardness A | 20 | - | - |
| Tensile Strength | 3.5 | N/mm² | ISO 37 |
| Value | Units | Test Method / Conditions | |
| Density (Componenet A) | 1.05 | g/cm³ | - |
| Density (Componenet B) | 1.05 | g/cm³ | - |
| Dynamic Viscosity (Component A) | 3000 | mPa·s | Brookfield |
| Dynamic Viscosity (Component B) | 4000 | mPa·s | Brookfield |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Note
- Components A and B of the addition-curing grade ELASTOSIL® M 4119 A/B contain only constituents that over many years have proved to be neither toxic nor aggressive.
- Special handling precautions are therefore not required, i.e. only the general industrial hygiene regulations apply.
Packaging & Availability
- Country Availability
- Regional Availability