Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
Applications & Uses
- Markets
- Application Method
- Industrial Additives End Use
- Application Details
- The product amount should be tailored to the particular tissue being used. Typically the amount of product applied on the tissue is in the range from 1 and 5 g/m². For the application of LIOSIL® TS 80 E common technologies like roll coating, slot coating, spraying, or rotor damping systems are recommended. Aerosol formation has to be avoided. In case of aerosol formation special protective measures are required.
- This product was especially developed to be suited for the WEKO application system. The use of the emulsion is recommended for all conventional tissue types such as toilet paper, facial tissue, handkerchiefs or cosmetic wipes, which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners or well-being additives, too, provided an adequate compatibility test has been performed. If substantial foaming occurs during processing, we recommend our SILFOAM® SD 670.
Properties
- Miscible in
- Water
- Typical Properties
- Properties
- Owing to its special structure and orientation on cellulose fibers, LIOSIL® TS 80 E is characterized by an excellent soft hand and a very good hydrophilicity.
- Excellent soft hand combined with very good hydrophilicity.
- Very easily dilutable with water
- High substantivity on cellulose fibers.
| Value | Units | Test Method / Conditions | |
| Chemical Characterization | Polydimethylsiloxane - (emulsion in water) | - | - |
| Density (at 20Ā°C) | approx. 1Ā | g/cmĀ³ | DIN 51757 |
| Dynamic Viscosity (at 25Ā°C) | 20 - 500Ā | mPaĀ·s | Brookfield |
| pH (at 23Ā°C) | approx. 5.5 | - | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability