Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
- Product Families
Features & Benefits
- Agrochemicals Features
Applications & Uses
- Markets
- Use Level
- 0.05 - 0.5 %
- Applications
- SILFOAM® SE 2060 complies with US FIFRA regulations 40 CFR § 180.920 and can be applied for pre-harvest pesticide formulations. National regulations applicable in the countries concerned must be observed.
- SILFOAM® SE 2060 shows a very good foam control performance in formulations rich in surfactants.
Processing
- In general we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm). But be cautious: too high shear can break the emulsion.
- The typical dosage is in the range of 0.05 to 0.5 % and is best determined by preliminary tests.
Properties
- Physical Form
- Diluent
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Active Ingredients | approx. 15 | % | - |
Density (at 20°C) | approx. 1 | g/cm³ | DIN 51757 |
Dynamic Viscosity (at 23°C, Brookfield, spindle 1, 50 rpm) | approx. 40 | mPa·s | Brookfield |
Emulsifier Type | o/w, Non-ionic | - | - |
pH (at 23°C, 1000 g/l) | approx. 5 | - | Indicator strips |
Solids Content | 25 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability