Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Cure Method
- Applications
- Anti-Graffiti Coatings
- Architectural Coatings
- Application Details
Particularly suitable for mineral building materials such as concrete, brick, limesandstone, natural and artificial stone, plaster, wood and coated metal surfaces as a permanent protection against graffiti. SILRES® BS 710 is to use only after a thorough examination on coated metal and plastic surfaces and possibly in combination with a suitable primer.
Processing
- Apply SILRES® BS 710 to a clean dry surface. Surface may be cleaned by scrubbing or power washing with a common solvent or cleaner. SILRES® BS 710 can be thinned to the desired application viscosity. Aliphatic solvents are the preferred choice. Other solvents may be used however all combinations must be tested to ensure clarity of the coating, solvency and stability. Weak solvent combinations can lead to a loss of cure, clarity or even precipitation of the coating’s solids. For this reason methyl acetate is not recommended.
- SILRES® BS 710 is applied using an airless sprayer. However, brush or roller are also suitable methods of application for small surface areas. Primer is not needed prior to SILRES® BS 710 to most common surfaces. Due to it’s consistency SILRES® BS 710 is easy to be applied in a single coat.
- A test area should be applied especially on painted or existing graffiti surfaces.
- With proper protective equipment SILRES® BS 710 may be applied via industrial spray application methods such as airless and conventional spray. See SDS for proper protective equipment. After use, the spray equipment and lines must immediately be flushed with solvents to prevent the coating from curing and forming a tough adherent cured film.
- SILRES® BS 710 cures quickly once applied to dry substrates and exposed to humidity in the air. Curing occurs at the surface and progresses to the substrate based on the available ambient moisture. Complete drying for heavier film builds may require up to 24 hours.
- Containers, once opened, should be used until empty. Any remaining coating, exposed to air will continue to cure and thicken resulting in surface skinning and increased viscosity.
Properties
- Typical Properties
- Properties
SILRES® BS 710 contains a select mixture of silicone compounds. The relatively high molecular weight silicone ingredients react with moisture under formation of the anti-graffiti coating with an excellent adhesion to the host surface. Thereby it is improving its weathering resistance and breathability.
- One-component system
- Effective on many building materials
- Single layer application usually sufficient, multi layer application possible
- Weatherproof
- Water repellent
- Permeable to water vapor
- Solvent dilutable and environmentally compatible
- Graffiti removal with water
- Enhances the color of the surface
Value | Units | Test Method / Conditions | |
Density (at 25°C) | 0.9816 | g/cm³ | DIN 51757 |
Flash Point | 35 | °C | ISO 3679 |
Kinematic Viscosity | 5020 | mm²/s | DIN 51562 |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.