Knowde Enhanced TDS
Identification & Functionality
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Specific Features
- Defoaming
- Flow properties
Applications & Uses
- Markets
- Applications
One-Component Self-Leveling Compounds
- Application Details
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5023 L with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
Properties
- Physical Form
- Appearance
- White to light beige powder
- Typical Properties
- Specifications
- Properties
- VINNAPAS® 5023 L is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
- Cured mortars modified with VINNAPAS® 5023 L exhibit improved adhesion, flexural strength, deformability and abrasion resistance and are easier to process.
- VINNAPAS® 5023 L can be combined with melamine sulfonate or other synthetic plasticizing admixtures to produce self-leveling flooring compounds and screeds.
- VINNAPAS® 5023 L produces very smooth surfaces that are free of surface voids.
- VINNAPAS® 5023 L contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 5023 L is especially suitable for the modification of self-leveling compounds based on melamine sulfonate plasticizers.
- VINNAPAS® 5023 L can also be combined with other synthetic plasticizers or casein. Because of the good defoaming properties of the powder smooth and pore free surfaces with good mechanical strength can be produced.
- Furthermore it allows self-leveling flooring compounds to be formulated with a low content of volatile organic compounds (VOC). The product thus can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.
Value | Units | Test Method / Conditions | |
Minimum Film Forming Temperature | 4 | °C | DIN ISO 2115 |
Protective Colloid (Emulsifier System) | Polyvinyl alcohol, high molecular compounds | - | - |
Value | Units | Test Method / Conditions | |
Ash Content (at 1000°C) | max. 13 | % | Specific Method |
Bulk Density | 480 - 580 | kg/m³ | DIN EN ISO 60 |
Particle Size (min. 400µm) | max. 2 | % | DIN EN ISO 4610 |
Solids Content | min. 98 | % | DIN EN ISO 3251 |
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
25 kg paper bags Big Bags or bulk on request.
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30°C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received.