company tower banner
Warren Paint & Color Company Logo

Warren Paint & Color ACRYLIC MODIFIED WHITE TRACTOR AND IMPLEMENT ENAMEL #A 13705

Warren Paint & Color Acrylic Modified White Tractor and Implement Enamel #A 13705 are formulated to withstand the elements and normal abuse. Quick Dry Enamels are ideal for factory application because they dry within minutes to a tack-free finish that fully cures within hours. Quick Dry Enamels are available in a wide range of colors and degrees of gloss, and they provide good exterior durability and corrosion resistance. Many common implement colors are in stock. Warren's Tractor and Implement Enamels are formulated to withstand the elements and normal abuse. Tractor and Implement Enamels are ideal for factory application because they dry within minutes to a tack-free finish that fully cures within hours. Blending with V 13707, Urethane Hardener and thinning with S 31 or S 20 tremendously enhances chemical and abrasion resistance while being extremely competitive in price with automotive enamels. Tractor and Implement Enamels are available in a wide range of colors and degrees of gloss, and they provide good exterior durability and corrosion resistance.

Product Type: Enamel

Application Area: Tractor

Compatible Substrates & Surfaces: Metal

Features: Corrosion Resistant, Fast Drying, Good Weather Stability, High Gloss, Outdoor Durability, Tack-free

Application Method: Brush, Roller, Spray

Chemical Family: Acrylics & Acrylates

    Knowde Enhanced TDS

    Identification & Functionality

    Chemical Family
    Product Type
    Vehicle

    Tall oil fatty acid chain-stopped alkyd and acrylic polymer reduced with toluene, xylene, and VM&P naphtha.

    Composition
    • Rutile Titanium Dioxide

    Features & Benefits

    Features
    • Fast Drying
    • Weather and Corrosion Resistant
    • Ideal for Exterior Metal Structures and Equipment

    Applications & Uses

    Application Area
    Application Method
    Compatible Substrates & Surfaces
    Surface Preparation

    Remove all dirt, scale, and grease. Prime with P 3987-01, #14 Red Oxide Primer or equivalent for best results. Check with your Warren representative for a wide variety of primer types and colors.

    Mixing and Thinning

    Stir or shake well. Thin up to 33% with S 46, Spraying Thinner or another recommended thinner to spray. Thin sparingly with S 40, High Flash Naphtha to brush. Do not over-thin.

    Application

    Brush, roll, spray. Thin as directed for conventional or H.V.L.P. spray. Apply between 50 and 95ºF with the relative humidity less than 80%. Do not expose to dew or rain within four hours after painting. Humidity can exceed 80% and dry times can be shortened if heat (no more than 300ºF) is applied.

    Recoat Time
    • Before one hour and after eight hours

    Properties

    Appearance
    High Gloss White Film
    Specifications
    ValueUnitsTest Method / Conditions
    Dry (Touch)15.0mins-
    Dry (Handle)1.0h-
    Dry (Hard)8.0h-
    Solids by Weight51.6%-
    Solids by Volume35.63%-
    Coverage (1.4 Mils DFT,100% transfer and Zero profile)404.0Sq.ft/gal-
    V.O.C.4.61lb/gal-
    Cured Film Properties
    • Good anticorrosive properties over steel and most metals. Good water and chemical resistance within eight hours. Good resistance to aliphatic solvents and many oils within seven days.

    Packaging & Availability

    Standard Packaging
    • Fives and one gallon cans (packaged four per case). Drums are available by special order.