Products in Consumer Goods: Silicones

NuSil™ CV-2189-2 is a controlled volatility silicone glop-top.

CMC Klebetechnik CMC 70752 is a double-sided adhesive tape that adheres to silicone surfaces and performs well at high temperatures.

ADD-3231 is a silicone-based surface additive to improve surface properties in all solvent-based medium- to high-polar systems. It is specially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. ADD-3231 can be used in coatings and printing inks.

NuSil™ MED-4917 is a low viscosity silicone elastomer.

NuSil™ CV-9052 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy General Purpose: Dampening Fluids, Lubricants & GreasesComments: Volume Resistivity 1x10^15 ohm-cm, Thermally conductive.

NuSil™ MED-6010 is a optically clear low viscosity silicone elastomer.

NuSil™ CV-2502 is a thixotropic controlled volatility RTV silicone.

Stoner, Inc. A324 Rapid Release is specially formulated to release molded silicone rubber, thermoset plastics, rubber, and similar materials.

Perma-New™ 6000 Class Coatings is a patented technology incorporating silica-filled methylpolysiloxane polymer containing a latent heat-cure catalyst system, in a blend of alcohols. They are colorless, slightly hazy liquids, typically containing 28% solids by weight. Solids content can be reduced to accommodate different application techniques.

Javachem® SG high-performance polyester modified silicone is developed for polyesters such as PC/ABS and PMMA, which gives the material long-lasting scratch resistance, improves scratches in daily use, and enhances assembly and plug convenience. It eliminates surface defects and keeps the product glossy and smooth for a long time, delivering good appearance recognition to the products such as home appliances, automotive interiors, and consumer electronics.

NuSil™ EPM-2482 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: GelsComments: Extreme Temperatures.

NuSil™ CV7-2289-1 is a controlled volatility potting and encapsulating silicone elastomer.

NuSil™ MED3-6311 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.Comments: HIGH PURITY, HIGH STRENGTH.

NuSil™ MED4-4420 is a low viscosity silicone elastomer.

GS® 825 Sealant is one of the most chemically advanced silicone based extruded sealants on the market and was primarily formulated for applications that see extremely high temperatures such as furnaces, ovens, and water heaters.

Sircon TR (30T), since the material is silicone rubber, it shows stable characteristics even when used for a long time.

Tufel™ II 94706 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

LightSpan® LS-3443 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Soft and Tacky Gel, Penetration 5 mm.

NuSil™ CV1-2646 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.005 ohm-cm.

C.B.Frost & Co. CBF40 is an inert material and does not react with most chemicals. It operates well under high temperatures of between 60˚C and +230˚C and has excellent resistance to ozone and UV. Due to the inertness of the material, it is ideally suited to several medical applications, and its weathering qualities mean that it is commonly used for a number of industrial purposes. General purpose silicone delivers high performance and a long-life span in extreme high and low temperature.

BAI YUN® PPO Solar Panel Silicone Sealant SMG533 Silicone Encapsulant For Solar Cells Silicone Sealants Used For Solar Panel Luminum, PPO, TPT/TPE Backsheet Black White Gray Or Customized Color.

Silopren™ LSR 2070 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2070 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2070 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Bellows Vibration dampers Pressure cooker parts ... and many more.

NuSil™ CF20-2186 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and SealantsComments: Longer Work Time.

Silductor 6350 is an electrically conductive silicone adhesive paste.

NuSil™ R-2930 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: 1.46 W/m-k Thermal Conductivity.

NuSil™ CV-2948 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 2.0 W/m-K, Primed Lap Shear 150 psi (1.0 MPa).

ADD-3236 is a silicone surface additive with defoaming properties to improve the surface properties of coatings, with particular emphasis upon leveling, it increases surface slip and thus improves scratch and mar- resistance. ADD-3236 is a heat resistant due to the alkyl-modification, which shows no thermal decomposition at high temperatures in baking systems such as coil coatings (up to 280°C for 15 minutes).

NuSil™ R-2615 is a optically clear potting and encapsulating silicone elastomer.

Si-TPV® 3300-65A is a patented dynamic vulcanizated thermoplastic Silicone-based elastomers which made by a special compatible technology , it helps silicone rubber dispersed in TPU evenly as a 2~3 micron droplets under microscope . This unique material provides a good combination of properties and benefits from thermoplastics and fully cross-linked silicone rubber. Suits for wearable device surface, Phone bumper ,Electronic devices accessories ( earbuds ,eg ), overmolding , artificial leather, Automotive, high-end TPE, TPU industries ....

NuSil™ R-1140 is a clear silicone adhesive.

MICAM’s S5 Grade is a silicone resin laminate, based on a fine weave glasscloth, with excellent machining characteristics. Excellent electrical, very low loss angle and excellent thermal properties.

NuSil™ MED2-6300 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.Comments: HIGH PURITY, HIGH PENETRATION, FIRM COHESIVE GEL.

CSL Silicones CSL588 Electronic Grade Silicone Sealant / Adhesive is one part, moisture cure, room-temperature vulcanizing (RTV), electronic grade 100% silicone sealant that cures to form a tough, permanently flexible rubber. The non-corrosive curing system makes it ideally suited for protecting, sealing and insulating corrosion-sensitive electrical and electronic materials such as copper, brass and silver. CSL588 has excellent dielectric properties, high surface resistivity and repels water to protect sensitive electronic components. CSL588 has superior resistance to weathering including ozone, ultraviolet radiation and airborne chemicals.

Sil-Bond RTV-4500 (Acetoxy) is a one component room temperature vulcanizing RTV acetoxy cure silicone sealant and adhesive that has been chemically formulated for high strength adhesion. When fully cured, this unique VOC compliant formula offers UV stability and excellent adhesion to form waterproof and airtight bonds to metal, steel, tile, fiberglass, ceramic, glass, aluminum, painted surfaces, wood, plywood, marble, plus many other common substrates. This product is specifically formulated to offer all weather performance to meets today's Green Building Standards.

NuSil™ CV-2568 is a controlled volatility RTV silicone.