Products in Oil, Gas & Mining: Chemical Resistant

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Staticide® 8696 Urethane Conformal Coating is a super tough coating with excellent chemical resistance. It protects against acidic and alkaline substances, making it an ideal choice for many general applications such as HVAC, fire alarms, relays, generators, motors, transformers, and battery-operated devices. Being ACL's hardest transparent conformal coating, it will not crack, yellow, or discolor over time under normal use. It provides outstanding protection without RoHS or REACH SVHC chemicals.

KALMATRON® KF-B as a protective and remedial coating penetrating into the concrete structure by at 15 cm or 6” designed for protection of concrete and masonry building structures as an ionic implant onto the structures in damp conditions to restore liquid/vapor impermeability, corrosion and freeze-thaw resistance, to stop rebar rusting and to rebuild structures by gluing of they broken parts. In a case if KF-B layer damaged, protected structure stays impermeable and densified. KF-B is best for repair of water supply and sewer systems; marine and fortification structures; facilities of the chemical and agricultural industries. Applied as a layer, it has no expansion in both the plastic and hardening phases without compensation of water. Layer of KF-B is a water impermeable under the hydraulic pressure at 14 [bar] and stable to aggressive environment at pH of 1.

Ply-Guard ME is a two-component, chemical resistant Mastic Epoxy coating system designed to perform exceptionally well in a broad range of severe environments, including in the presence of strong acids/alkalis and organic solvents. It can be used as a primer and should be used wherever chemical and abrasion resistance and outstanding adhesion are essential. Ply-Guard ME is designed for use on properly prepared concrete and metal surfaces in refineries, offshore platforms, chemical plants, food and beverage plants, and pulp and paper mills.

WESCOAT® WC04P7 is a coating product that will guarantee performance and longer lifespans. WESCOAT® WC04P7 addresses the chemical, wear and erosion issues.

Hempel A/S Galvosil 15700 is a solvent-borne, self-curing, inorganic zinc rich silicate primer with outstanding resistance against weathering and abrasion. Offers excellent galvanic protection of local mechanical damage. Has excellent chemical resistance within the pH range 6-9. The product is in compliance with the compositional requirements of SSPC Paint 20, Type I, Level 1 and ISO 12944 Part 5, 2018. In full compliance with ISO 3549 and ASTM D520 type II.

PREVLON 500 is a polyurethane type coatings, applied for harsh chemical environments and a wide variety of applications in various industries. This coating is the basis for popular “truck-bed liner” coatings.

Ply-Guard NS is a two-component, chemical resistant, non-skid epoxy coating system designed to perform exceptionally well in a broad range of severe environments, including in the presence of strong acids/alkalis and organic solvents. It should be used wherever non-skid properties, chemical and abrasion resistance, corrosive environment resistance & outstanding adhesion are essential. Ply-Guard NS is designed for use on properly prepared concrete and metal surfaces in refineries, offshore platforms, chemical plants, food & beverage plants, and pulp and paper mills.

BONDiT™ B-536 is a two-part, very high strength, 100% solids, room-temperature curing semi-flexible epoxy resin system. Especially designed for adhesive applications in bonding to a wide range of engineering plastics, including polyolefin and metals, glass, ceramic, composite and wood. Typical example of lapshear bond strength is 1100 PSI for PEEK-to-PEEK and PEEK-to-Steel substrates. B-536 handles harsh environments easily and is effective against moisture, salt water, acids, alkalies, oils, and detergents. B-536 has high thermal stability and offers good corrosion resistance. The semi- flexible properties of B-536 permits assembly of materials with dissimilar thermal expansion and survive thermal cycling. Likewise mechanical vibration, shock and impact are easily absorbed by B-536 and protect surfaces and bonded assemblies.

Integrated Protective Coatings System 3 Modified is a multi-coat systems of Teflon FEP coating that provides nonporous films with excellent chemical resistance, release, and abrasion.

Valve Lubricant 601™ is a specially formulated valve lubricant based on a fully synthetic oil and incorporating an advanced corrosion inhibition system and an inorganic thickener.

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

BONDiT™ B-482 is a two-part, state-of-the-art 100% solids, room-temperature curing flexible epoxy resin system. Especially designed for potting, coating, and adhesive applications for electronics and electrical assemblies, environmental sealing, hard coating for corrosion resistance, bonding engineering plastics and elastomers to various substrates.

Thermaguard™ CUI 650 is a third generation, pure inorganic single component, ambient curing polysiloxane coating formulated specifically to provide corrosion protection to under insulation environments where wet & dry cycling can occur. The coating conforms to the NACE SP0198-2017 classification, inert multi polymeric matrix coatings for Corrosion Under Insulation (CUI) in both cryogenic & elevated temperature applications. Through specific formulation technology Thermaguard™ CUI 650 can withstand temperatures from -196 to 650°C, fully curing at ambient conditions eliminating the need for heat curing prior to service. Thermaguard™ CUI 650 has exceptional resistance to thermal cycling, hot saline water immersion & chemical exposure throughout its operating temperature range. Thermaguard™ CUI 650 can be used in both OEM (shop application) & maintenance work due to having surface tolerance to rusted steels which have been marginally prepared (St 2/3). Additionally, the product can be applied in service to hot equipment operating up to 260oC, removing the need for plant shut down periods.

BONDiT™ A-37 is a high performance, high temperature moisture resistant, primer, adhesive, adhesion promoter and additive used with metals, glass & ceramics, elastomers and polymers. BONDiT™ A-37 offers a wide range of capabilities for promoting moisture resistance chemical bonding between minerals and polymers, as well as dissimilar polymers. it is used as a primer coat and additive for other BONDiT™ coatings and encapsulants. BONDiT™ In particular A-37 may be used as a primer to promote adhesion to silicone rubber and for vulcanizing silicone rubber to many substrates.

PREVLON 200 is similar to 100-Series, but with greatly enhanced chemical resistance. Able to be submerged in acids or corrosive materials for long durations of time with zero degradation. Still can be combined with base materials for even greater resistance to all forms of chemical and abrasive attack.

Integrated Protective Coatings System 3 Black is a FEP-based Teflon thin film coating that is designed to provide excellent chemical and corrosion resistance in a single coat application.

Revol RS12 is a next generation, fully synthetic polyester based product with exceptional chemical resistance.

Dicronite® Dry Lubrication is a tungsten disulfide (WS2), solid lubricant coating. This extremely thin film coating provides friction and sliding wear reduction that improves performance in various applications across numerous industries.

PREVLON 400 is a nylon (aka Rilsan) coatings offer a wide array of excellent properties that include chemicals resistance and tough mechanical properties. Such coatings can be used to build-up printing roll surfaces.

Industrial Hard Carbon Dry Film Coating is a great coating alternative for those looking for corrosion protection, and increased lubricity while maintaining resistance against oil and fuel chemicals.

MBI Coatings Ceramic with PTFE is ceramic offers an inert, dielectric and very hard base layer for an PTFE topcoat. The embedded PTFE will offer enhanced corrosion control, abrasion resistance, slickness and release properties.

Ply-Guard MEA is a high solids, high build Mastic Epoxy Aluminum formulation that cures to a tough, flexible, abrasion resistant film. Ply-Guard MEA is self-priming and has excellent adhesion to rusted steel that has had proper power tool cleaning. It is easy to apply by spray, roller or brush. Ply-Guard MEA has high build characteristics allowing 18 mil WFT or more while providing high sag and run resistance. Ply-Guard MEA is an ideal product for improving and upgrading old and deteriorating coating systems.

Premier Rubber Membrane® system is a modified asphalt emulsion system using exact formulated polymers providing unique elastomeric performance. This product is engineered to achieve a seamless monolithic membrane that will bond 100% to most construction materials.

Integrated Protective Coatings System 5 Ruby Red is a multi-coat system of Teflon PFA formulated to provide superior chemical and permeation resistance.

PREVLON 300 is plastic flame spray (polypropylene, polyethylene & fluoropolymers) thermal sprayed coatings, featuring fused adhesion to the metal surface. Wide range of protection including wear and severe corrosion.

BONDiT™ C-52 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-52 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is especially useful as a primer and adhesion promoter for injection molding to metal and glass with polyethylene, polypropylene and polyolefins in general, PPS, PVC, PBT, ABS, polysulfone, polystyrene, polyamide (nylon 6 and 66), polyamide-imide, polyimide, polyvinylbutyral, melamine, polycarbonate, polyester, polyether, phenolic, and epoxy, with molding temperatures up to 328°C/622°F.

BONDiT™ C-6 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-6 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is used as a primer coat for other BONDiT™ coatings and encapsulants.

PERMATEC 3000 CT is a 100% solids epoxy floor topping designed for cool temperature applications commonly found in food and beverage processing facilities. The PERMA TEC 3000 CT system consists of a two component resin binder and graded aggregate. It is applied with a trowel or screed rake at 1/8 -1/4 inches (125 - 250 mils) in a one coat application (Cold Temperature) including a silica broadcast. There is no need for a primer or sealer coat. An optional glaze coat may be used to improve the appearance and cleanability. The vertical formulation of PERMA TEC 3000 CT is trowel applied at 1/8 inches (125 mils).

Formasil H2O - Valve Sealant is for high-pressure gate valve applications in hydrocarbon service. Formasil H2O - Valve Sealant is chemically resistant to aliphatic liquids and gasses, including gasoline and kerosene, fuel and lubricating oils, natural gas and brine water. Formasil H2O - Valve Sealant is effective at temperatures to 400°F and is fortified with anti-rust, anti-wear, and corrosion inhibitors.

Hardide-T is a tough, ductile, and impact resistant coating designed for use in abrasive and erosive environments.

Integrated Protective Coatings System 7 B is a thermally cured MOS2-based solid film lubricant that is specifically designed to provide lubrication in higher load carrying applications.

Thermaguard™ CUI 300 is a unique inorganic single component, ambient curing polysiloxane coating formulated specifically to provide corrosion protection to under insulation environments where wet & dry cycling can occur. Novel technology which offers high solids chemistry, low VOC for demanding environmental regulations and safety aspects during hot application. The coating conforms to the NACE SP0198-2017 classification for Corrosion Under Insulation (CUI) in both cryogenic & elevated temperature applications. Through specific formulation technology Thermaguard™ CUI 300 can withstand temperatures from -196 to 300°C, fully curing at ambient conditions eliminating the need for heat curing prior to service. Thermaguard™ CUI 300 has exceptional resistance to thermal cycling, hot saline water immersion & chemical exposure throughout its operating temperature range. Thermaguard™ CUI 300 can be used in both OEM (shop application) & maintenance work due to having surface tolerance to rusted steels, which have been marginally prepared (St 2/3). Additionally, the product can be applied in service to hot equipment operating up to 300°C, removing the need for plant shut down periods.

Integrated Protective Coatings System 3 Red is a high-cure fluoropolymer coating that is designed to provide an excellent release and good abrasion resistance.

Integrated Protective Coatings System 5 Sparkling Clear is a multi-coat system of Teflon PFA that provides excellent chemical resistance and superior release in continuous service temperature of 500°F.

SPI’s patented PTU™ 100% pure polyurea is a new generation of high-performance polyurea coating and is the resultof six years of development and field testing. This chemical resistant coating provides high-ductility, allowing itto move with expanding and contracting surfaces. PTU™ can be sprayed to any thickness in one application andreturned to service in a matter of hours.