Products in Power, Water & Utilities: High Performance

CHT Group XAF-102 is a 100% active, self-dispersing antifoam compound. It is formulated for specialized applications that require a high-active solution to combat high pH foaming systems. Belonging to the XAF series, this product provides outstanding performance in extreme environments.

CHT Group JAF antifoam series products are water-dispersible, active silicone defoamers of various concentrations. They are formulated to control foam in a wide variety of industrial applications that have extreme pH systems. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.

BIOTREND® BIT20-D is a 20% aqueous dispersion of benzisothiazolin (BIT), utilized to inhibit the growth of bacteria and fungi, including yeasts and molds. It serves as a highly effective biocide across various applications, such as preservation of latex paints, aqueous industrial preservation, polymer lattices, adhesives, joint compounds, and dispersed pigments like clays, titanium dioxide, and calcium carbonate. BIOTREND® GA50 is Zero VOC, devoid of formaldehyde, and does not generate MIT.

BIOTREND® GA50 is a 50% Glutaraldehyde solution, serving as a potent microbiocide for managing spoilage, odor-causing, corrosion-inducing, slime-forming bacteria, sulfate-reducing bacteria, fungi, yeast molds, and algae. It finds application in diverse settings such as paper mills and paper mill process water systems, water-based coatings for paper and paperboard, air washers, recirculating cooling water systems, heat transfer systems, oil well drilling, oil field processing, and pigments and filler slurries for food contact paper and paperboard.

Excelene 4980 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.

Excelene 1000 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

AquaGraft® EPMC-2 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Aquagraft® 16-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Colorable flame retardant polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, deformation resistance at high temperatures, and superior flexibility.

AquaGraft® EPMC-4 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Superohm® 240 NL-HE is a RoHS compliant, highly flexible, colorable, polymeric composition in pellet form, based on EPR rubber, containing peroxide curing agent, ready for extrusion in a conventional CV or Dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for applications up to 25kV.

AquaGraft® EPMC-16 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Aquagraft® 1-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

CoreLite PVC F 100 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PVC F 60 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PVC F 80 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PVC F 130 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

Atlas HPE 120 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Godiplast PEEK(G) 8800G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Godiplast PEEK(CF) 8200CF30 is a Carbon reinforced resin particle, standard viscosity, black color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.