Products in Paints & Coatings: Epoxy & Epoxy Derivatives

ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SYNTHALAT A 200 is an acrylic/epoxide resion cross-linked with polyisocyanate. It is used in combination with aliphatic polyisocyanates for air-drying and oven-drying two-component primers with excellent filling properties, quick drying, and good adhesion to steel, aluminum, and zinc, which gives good results in condensed moisture tests and salt spray tests. Wherever there is a requirement for maximum corrosion resistance and adhesion, this type of 2-component primer is used. It has applications in industrial maintenance, primers and lacquers, and metal coatings.

Farboset® 9251 is a nonanhydride epoxy powder coating designed for applications where fast cure and thermal resistance are essential. This compound is particularly suitable for encapsulating motor iron applications and is recommended for various applications, including meter coils, busways, stators, rotors, and armature insulation. It provides the required thermal resistance and fast curing for these applications.

Farboset® 9020 is a nonanhydride epoxy powder coating known for its excellent moisture resistance. It is specifically designed for encapsulating components such as ceramic and film capacitors, coils, thermistors, and resistors. This coating helps protect these components from moisture and environmental factors, ensuring their performance and reliability. Farboset® 9020 can be applied using various methods, including fluidized bed, wheel coaters, and electrostatic spray techniques.

Additive EP024 73 Wa/BG is an epoxy phosphate additive for waterborne stoving enamels. With this resin it is possible to improve adhesion and resistance to corrosion, chemicals and stains.Features & BenefitsFor waterborne stoving enamelsImprove adhesionImprove resistance to corrosion

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

GP® CK-2420 resin is used as a modifier for alkyd and epoxy air dry coatings. It is designed to improve water resistance, hardness, gloss and adhesion. It is also used to accelerate heat-bodying rate on linseed and dehydrated castor oils.

GP® CK-2400 coating resin is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, leveling, gloss and intercoat adhesion.

GP® LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance.

GP® CK-2500 coating resin is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, gloss and intercoat adhesion. GP CK-2500 resin enables higher solids and lower viscosity solutions than those made with GP CK-2400 resin.

GP® CK-2103 resin is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, gloss and adhesion. Coatings made with GP CK-2103 resin dry faster than those made with GP CK-2432 resin and will darken on drying.

Additive EP135 is an epoxy-phosphate ester resin developed as an additive for stoving enamels. This resin improves humidity and corrosion resistance, adhesion, chemical resistance, stain resistance and pasteurization resistance.Features & BenefitsFor stoving enamelsImproves humidity and corrosion resistanceImproves adhesion, chemical resistance

Swiss Formula ACR is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on acrylic and fiberglass tubs,sinks, hot tubs, spas and jacuzzis. Swiss Formula ACR is available in White, as well as special order colors.

Klenk's Epoxy Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with Klenk's Epoxy Thinner prior to use. Klenk's Epoxy Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.

BECKOPOX™ VEM 2448/50EEP is a self-crosslinking, modified, carboxylated epoxy resin serving as the exclusive binder in can-coating systems for both interior and exterior applications. It is particularly well-suited for white and clear coatings, including stamping enamels, capsule lacquers, foil lacquers, and coil-coating primers. This resin excels at providing outstanding resistance. Its versatility extends to epoxy coatings, solvent-borne coatings, and primers. Widely applicable, it finds use in marine coatings, vehicle refinish, and other packaging coatings.

EBECRYL® 3730-TP20, from CASE Ingredients, is a clear liquid radiation-curable coating boasting a low carbon footprint (PCF). This solvent-free and VOC-free formulation serves the automotive and transportation, paints and coatings, and printing and packaging markets. Ideal for automotive OEM coatings, wood finishes, and various application methods like air knife, curtain, dip, gravure, rod, roller, screen, and slot-die coating.

EBECRYL® 3605 is a partially acrylated ester of a bisphenol A-type epoxy resin, featuring both acrylate and epoxy functionalities. It can be cured with UV radiation using a mixed photoinitiator system comprising free radicals and cationic photoinitiators. This resin has been specifically developed for applications demanding enhanced coating performance properties beyond what conventional UV/EB curing alone can achieve. The end use for EBECRYL® 3605 is in radiation-curable coatings. With a focus on eco-friendly practices, this product carries labeling claims of low carbon footprint (PCF), solvent-free, and VOC-free.

BECKOPOX™ EP 385W/56WA, an epoxy and epoxy derivative binder and resin by CASE Ingredients, boasts VOC-free labeling. This dispersion provides corrosion resistance, improved chemical resistance, and enhanced flexibility. Targeting automotive, building and construction, and paints and coatings sectors, it excels in applications like automotive OEM coatings, marine coatings, and decorative finishes on metal surfaces and laminates.

BECKOPOX™ EM 2120w/45WA is a dispersion and liquid within the epoxy and epoxy derivatives chemical family, functioning as a binder, resin, and corrosion inhibitor under CASE Ingredients. Targeting automotive and transportation, paints and coatings, and building and construction sectors, it stands out with APEO-free, formaldehyde-free, and VOC-free labeling. This product offers corrosion resistance, a balanced set of properties, low flash rust, and matting features. Suitable for 1K coatings, epoxy coatings, primers, and waterborne coatings, it is compatible with epoxies and adheres well to metal and wood substrates.

BECKOPOX™ EP 140/80SNB is a liquid binder and resin within the epoxy and epoxy derivatives category by CASE Ingredients. Tailored for the automotive and transportation and paints and coatings markets, it finds specific applications in automotive OEM coatings, marine coatings, and industrial coatings. This product is compatible with metal substrates and is available in epoxy and solvent-borne coating forms.

EBECRYL® 1885 is an undiluted polyester acrylate resin, delivers exceptional performance when cured by ultraviolet light (UV) or electron beam (EB). Films derived from EBECRYL® 1885 showcase high flexibility and excellent abrasion resistance, making it an ideal choice for parquet floor and furniture applications. With features such as a good balance of properties, long pot life, faster cycle time, improved flexibility, high gloss, low-temperature curing, and low energy consumption, EBECRYL® 1885 stands out as a versatile solution for applications demanding a combination of durability and esthetic appeal.