Products in Other Paints & Coatings Applications: Oligomer

Bomar™ BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, coatings & inks for steel, plastic, glass and medical device.

EBECRYL® 6617 is an aromatic urethane diacrylate oligomer diluted in methyl methacrylate (ratio 75/25), characterized by its adhesion to various surfaces and good flexibility. It is used in radiation-curable coatings and finds application in chemical manufacturing and other specialty coatings. The cured products based on EBECRYL® 6617 offer features such as faster cycle time, improved flexibility, long pot life, low energy consumption, low-temperature curing, matting, and multi-substrate adhesion.

Bomar™ BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200oC for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and Polystyrene. This material has low skin sensitivity for dental and cosmetic applications.

EBECRYL® 117 is a hydroxyl-functional monoacrylate monomer, is recognized for its low odor, excellent adhesion, and heightened reactivity. Primarily employed in UV/EB cured coatings and adhesives, it effectively reduces viscosity and enhances flexibility. With applications in flexography ink, radiation-curable coatings, and inkjet ink, as well as roles in resin manufacturing and other specialty coatings, EBECRYL® 117 stands as a versatile solution in diverse industries.

Bomar™ BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier, and is a perfect choice for optically clear UV-PSAs.

EBECRYL® 4690 has a wide range of uses in the paint and coatings sector, especially in the building and construction sector. This product is excellent for adding durability and visual appeal to a variety of surfaces. It is ideal for use with architectural coatings, ornamental paints, wood coatings, and finishes. BEBECRYL® 4690 is a desirable furniture coating for both industrial and consumer goods, and it is compatible with wood substrates. Its versatility also encompasses specialty coatings, which further solidifies its position as a dependable option for a variety of uses, such as inks and printing.

PL-7013 has a relatively low viscosity but upon curing exhibits high conversion and low shrinkage. It exhibits excellent flexibility once cured. PL-7013 is very low color.

KELLOMER STA-2310 is a star branched acrylate. Films of STA-2310 cured by UV/EB exhibit very high hardness and excellent scratch resistance to film and plastic.

Basis® F 39 has Adipic Acid base used as adhesives, PUR hot melts, PU coatings, PU shoe soles, elastomers, PU flexible foam.

Epoxy Acrylate Oligomers

KELLOMER VK-421 is a aliphatic urethane acrylate oligomer. It is characterized by low odor, and high molecular weight. The cured films exhibit excellent flexibility, non yellowing, and good adhesion to substrates.

KELLOMER STA-2340 is a star branched acrylate. Films of STA-2340 cured by UV/EB exhibit very high hardness and excellent scratch resistance to film and plastic.

KELLOMER STA-2130 is a star branched acrylate. Films of STA-2130 cured by UV/EB exhibit very high hardness with flexibility and excellent scratch resistance to film and plastic.

Basis® F 31 has Adipic Acid base used as adhesives, PUR hot melts, PU coatings, PU shoe soles, elastomers, PU flexible foam.

KELLOMER STA-2320 is a star branched acrylate. Films of STA-2320 cured by UV/EB exhibit high hardness with flexibility and excellent scratch resistance to film and plastic.

bossin® W-30 has a high elastic and low temperature flexibility with carboxyl react, with hardener of amino resin and polyurethane resin. The crosslinking reaction is very well, form a toughness and elastic film.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

COSMONATE JG-70K is a special polymeric MDI of low viscosity used for electrostatic paint for CASE. COSMONATE JG-70K is kept in liquid state at ambient temperature, and is easy to store and handle at temperatures as low as 10℃. The solvent-free product has viscosity of up to 80 cps at 25℃ and a mean functional group of approx. 2.4, with a mixture of monomer MDI of 4,4-Di phenylmethane diisocyante, and its oligomer of dimer, trimer and quatromer.

PL-7100B has a very high conversion rate upon curing, resulting in low shrinkage and a high strength material. PL-7100B is non-yellowing and can be used in formulations to add strength.

KELLOMER STA-2330 is a star branched acrylate. Films of STA-2330 cured by UV/EB exhibit very high hardness and excellent scratch resistance to film and plastic.

KELLOMER STA-2350 is a star branched acrylate. Films of STA-2350 cured by UV/EB exhibit very high hardness and excellent scratch resistance to film and plastic.

bossin® W-02 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic.

CosmonatePH is pure monomeric MDI that has purified to high degree of purity. It is crystal white solid on normal temperature, and pure and clear like water when it is liquefied. And it’s monomeric MDI of 4,4 -, 2,4 -, 2,2 -diphenylmethane diisocyanate with fan shape structure that the organic function is 2. Especially, it has strong resistance of discoloration which is the property of monomeric MDI. So it has excellent inner discoloration stabilization against high temperature and ultraviolet rays.

PL-7011 exhibits excellent flexibility upon curing. It is a non-yellowing extended urethane dimethacrylate and can be used in formulations to add toughness.

PL-7021 has a unique structure which results in a flexible cured product. Adding PL-7021 to formulations has been shown to increase toughness.

KELLOMER STA-2140 is a star branched acrylate. Films of STA-2140 cured by UV/EB exhibit high hardness with flexibility and excellent scratch resistance to film and plastic.

PL-7000 is a low viscosity urethane dimethacrylate. When cured, PL-7000 exhibits good hardness and strength. PL-7000 is low in color.

POLIMER 4008 is a epoxy-acrylate oligomer with 20 % TMPTA.

Epoxy Acrylate Oligomers

KELLOMER VC-4010 is an aliphatic urethane diacrylate oligomer. The cured films have good flexibility and improved adhesion to substrate.

PL-7121 is a novel low-shrink urethane monomer based on Esstech's proprietary methacrylate technology. PL-7121 possesses a volumetric shrinkage of 2.0 - 2.5% and conversion of 65 - 80% without filler. PL-7121 has very low color and can be added to formulations to add toughness. PL-7121 possess the excellent combination of superior elongation and strength.

Cosmonate JG-50K is low adhesion degree Special Polymeric MDI which is used in manufacturing of electrolysis paint hardener. Cosmonate JG-50K is liquefied product in high temperature, so easy to treat for storage up to 10, as a Solvent Free type, mixed with one volume MDI of 4,4-Diphenyl-methane dilsocyanate, of which more than two volume, three volume, four volume's oligomer, has maximum 20cps(25 ) of adhesion degree and average 2.3~2.4 of sensory gear.

Cosmonate LI is made by turning part of Cosmonate PH, which is a crystal solid in room temperature, into carbodiimide. In room temperature, it stays as low-temperature liquid and is excellent in transparency especially when applied for special coating sectors. It is a lightyellow modified MDI developed to be handed and used conveniently.

PL-7003 is a low viscosity urethane that exhibits very fast cure speeds. Upon curing, PL-7003 exhibits excellent hardness and very low color. PL-7003 can be used in formulations to add strength.

PL-7110 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7110 creates a tough polymer with percent elongation near 60%. PL-7110 is non-yellowing and can be used in formulations to add toughness.

PL-7002 is a tetrafunctional polymethacrylate. This increased functionality results in faster cure speeds due to increased cross-linking capacity. Upon curing, PL-7002 exhibits very high Shore D hardness values. PL-7002 is non-yellowing and can be used in formulations to add strength.