Products in Other Paints & Coatings Applications: Polyolefins

S-368-N5T is a stable water dispersible grade of synthetic wax showing melting peaks ranging from 93 – 106°C. S-368 N5T imparts lubricity, abrasion resistance and anti-blocking properties to aqueous-based systems. It also has been used successfully in laminating adhesives to improve die-cutting performance.

AdvaBond ® 7411 is a chlorine-free low molecular weight anhydrous amine-modified polyolefin. Adva-Bond® 7411 is an effective adhesion promoter to low surface energy substrates, between different types of plastics which normally would separate and between plastics and polar substrates.

TRECORA OXIDIZED POLYETHYLENE WAX – OX7 is oxidized High Density Polyethylene Wax used in applications where compatibility with polar systems are required. They can also be used in aqueous systems like wax dispersions used in coating and other industrial applications.

OE-6103 with very good gloss keeping property, excellent abrasion resistance, especially suitable for water-based coatings and inks.In water-based flexo printing inks, OE-6103 can improve the abrasion resistance of ink layers and keep well of the coating gloss.In water-based coatings, OE-6103 can effectively improve the scratch&abrasion resistance and provide very good slip effect.

Kolon Industries HIKOTACK® P-120P is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade especially shows very good compatibility with polar polymer such as epoxy resin, alkyd resin and ethylene vinyl acetate(EVA) by modification of phenolic monomer. The major usages are vehicles in the coating industry and tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA). .

DONGRAY® PE WAX 200A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

COLLOIDS PP 50/10 is based on a wide range of polymers for use in highly demanding product applications.

TRECORA OXIDIZED POLYETHYLENE WAX – OX18 is oxidized High Density Polyethylene Waxes used in applications where compatibility with polar systems are required. They are used as internal lubricants in PVC extrusion.

Micronized Polyethylene wax

CERALENE® 2E is a low density polyethylene wax with a typical average molecular weight of 3000 MW.

AUROREN® 200 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 200 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 200.

KVIS 200 is the trade name of Kothari’s polyisobutylene with molecular weight ranging from 2300 to 2500. KVIS 200 possesses high shear stability and oxidative stability, which makes it the most suitable grade for speciality lubricants and grease. Explore here to see how our KVIS 200 is ideally suited as a high molecular weight dispersant, oil additive, thickener or even tackifier.

Hanwha Solutions LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

LUBA-print® 942 is a wax dispersion / wachsdispersion product. This product is based on waterbased paints and stains to improve slip, antiblocking and water resistance. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® 154/S is a wax dispersion / wachsdispersion product.This producthave uses in aqueous paint-systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Marcus Oil and Chemical M200 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

LUBA-print® 301/K-2 is a wax dispersion / wachsdispersion product. Solvent based paint systems, to improve mar resistance. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

FRGEL®E900 is a polyethylene wax based specialty additive, FRGEL®E900 is generally recommended for variety of coatings and inks application.

Microcarb® designed to be used in the production of water based coatings and paints allow for matt to gloss finishes, offering a good balance between coverage, whiteness and stability (Low Binder Demand). In addition, ultrafine qualities allow for the reduced consumption of titanium dioxide and other expensive extenders like PCC and Aluminum silicate.

SUPERCHLON® E-480T is developed special technology are the waterborne chlorinated polyolefin, which shows excellent adhesion to polypropylene substrates and can be used as primers and adhesives.

CERALENE® 1X is a low density polyethylene wax with a typical average molecular weight of 1200 MW.

Kemfluid 201 is a polyethylene wax, used in extrusion of rigid or soft PVC. External lubricant with low amount of filler. Gives good surface shine.

Kolon Industries HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Micronized polypropylene wax

Marcus Oil and Chemical M500 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Alkathene XLC177 is an extrusion coating grade exhibiting very good drawdown. The higher density and low MFI of this grade provide low moisture vapor transmission rates and excellent hot tack.

CalciRC 100 acts as a filler. It is a dry powder with high brightness and controlled top-cut. Has high purity, unique particle shape and narrow particle size distribution. Offers high whiteness, low iron content, low levels of heavy metals, low abrasivity, less agglomeration and better flow as well as rheological properties. Also offers lower density, no dust or waste from ultra-fine particles, optimum optical properties and relatively low surface area. It helps to achieve 6-sigma process control. Used in paints and printing inks applications.

DONGRAY® OPE WAX 600A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

PEW-2011 is water-based wax dispersion with high solid content, especially suitable for high solid content formula, easy to use and stable for storage. With excellent abrasion&scratch resistance, stain resistance, and smooth hand-feeling in water-based inks and coatings. In leather finishing agent, it can provide very good stain resistance and wax feeling.

PPW-0931 has uniform particle size and shape,high melting point, good transparency, and can be easily dispersed. PPW-0931 is suitable for solvent-based coating; improves scratch resistance, and blocking resistance to higher temperatures. PPW-0931 has synergistic effect, helps to prevent the precipitation of the silica matting. When used with silica, the silica and polypropylene wax proportion is about 1:1 to 4:1.When added to the powder coatings, PPW-0931 helps improve the powder coatings hardness, and the scratch resistance. It also improves the wear performance, and can assists in matting of powder coatings.

PEW-2015 is water-based wax dispersion with high solid content, especially suitable for high solid content formula, easy to use and stable for storage. With outstanding abrasion resistance in colored ink. In water-based coatings, PEW-2015 provide good abrasion&scratch resistance, matting, anti-sticking effect and with smooth hand-feeling. In leather finishing agent, it can provide very good abrasion resistance, stain resistance and wax feeling.

Marcus Oil and Chemical M3400P is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Adiplast Wax PI - 100 is polyethylene wax used for the formulation of paints.

Kolon Industries HIKOTACK® P-120H is a pale yellow thermoplastic resin obtained from the copolymerization of aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers good solubility with various solvents and excellent compatibility with various polymers, and is mainly used as an additive for paint, ink and tackifier resin for Ethylene Vinyl Acetate (EVA) type hot melt adhesive (HMA). .

LUBA-print® 501/S (ND) is a wax dispersion / wachsdispersion product.Can-Coating applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® W 5700 is a wax dispersion product.This product have applications in aqueous lacquer systems,aqueous printing inks and properties as such as improve slip property and mar resistance , improve the rub and mar resistance with good gloss stability. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.