Products in Specialty Coatings: Adhesion Promoter

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Gelest (3-ACRYLOXYPROPYL)TRIMETHOXYSILANE, 96% (SIA0200.0) is a comonomer for free-radical polymerization. This product functions as an adhesion promoter and coupling agent.

Gelest BIS[(3-METHYLDIMETHOXYSILYL)PROPYL]POLYPROPYLENE OXIDE (SIB1660.0) is a dual-functional polypropylene glycol. This product functions as an adhesion promoter, binder and resin, and coupling agent.

Gelest (3- GLYCIDOXYPROPYL)TRIMETHOXYSILANE (SIG5840.0) is an epoxy-functional trialkoxy silane used as a component in aluminum metal bonding adhesives. This product functions as an adhesion promoter and coupling agent.

TYTAN™ TNBT is a highly reactive primary titanate that hydrolyzes immediately upon contact with moisture. It is primarily used as a catalyst for esterification, transesterification, and olefin polymerization, and is also highly suitable as an adhesion-promoting and cross-linking agent for hydroxylic compounds or heat- and corrosion-resistant coatings. TYTAN™ TNBT can also be used as a moisture scavenger to extend the shelf life of moisture-sensitive, high-viscosity products. It can only be added to solvent-based products.

TYTAN™ S6 is a titanium ethylacetoacetate commonly used as an important additive in moisture-curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross-linking, and as a moisture scavenger for sealant. TYTAN™ S6 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.

Tytan™ TNBT serves multiple purposes, including its utilization as a moisture scavenger to extend the shelf life of moisture-sensitive, high-viscosity products. It is exclusively suitable as an additive for solvent-based products and facilitates ambient temperature curing while enhancing corrosion resistance.

Tytan™ EHT finds applications across various industrial sectors, serving notably as an esterification and transesterification catalyst. It exhibits reduced sensitivity to moisture, enhancing its performance and reliability in diverse applications.

Tytan™ TAA boasts an exceptional balance between reactivity and cross-linking/adhesion-improvement properties, rendering it highly suitable for significantly enhancing the performance of industrial coatings on challenging modern polymeric substrates, glass, and certain metals. It's important to note that Tytan™ TAA is exclusively applicable in solvent-based inks and coatings.

Tytan™ TIPT primarily serves as a catalyst for esterification, transesterification, and olefin polymerization processes. Additionally, it can be selectively employed as an adhesion promoter and cross-linking agent for hydroxylic compounds or in the formulation of heat and corrosion-resistant coatings. Notably, it offers higher efficiency in its various applications.

Tytan™ ET is employed across a spectrum of industrial applications, including as an esterification and transesterification catalyst, an olefin polymerization catalyst, an adhesion promoter, a crosslinking agent for hydroxylic compounds, and as a constituent of heat and corrosion-resistant paints. Its notable characteristic lies in its higher efficiency, contributing to improved performance in various processes.

USI Chemical Silane USi-1302 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. Silane USi-1302 also greatly increases water (vapor) and corrosion resistance.

EBECRYL® 168 is a clear liquid serving as an adhesion promoter and coupling agent within the CASE Ingredients category. Notable for its attributes like faster cycle time, long pot life, and multi-substrate adhesion, this product stands out for its efficiency in diverse applications. Specifically tailored for the automotive and transportation and paints and coatings sectors, it finds usage in areas such as automotive OEM coatings, vehicle refinish, and industrial coatings. Its versatility extends to printing and packaging, excelling in gravure and screen printing applications. Compatible with substrates like metal and wood, it cures efficiently through radiation methods and serves as a sol-gel coating and varnish.

EBECRYL® 3600, developed by CASE Ingredients, is a clear liquid designed for radiation-curable coatings in the paints and coatings and printing and packaging markets. With a focus on sustainability, it carries labeling claims of low carbon footprint (PCF), solvent-free, and VOC-free. Tailored for various applications such as wood finishes, industrial coatings, and specialty coatings, it supports methods like curtain coating, dip coating, gravure coating, roller coating, and slot-die. Specifically formulated for compatibility with plastics and wood, this product ensures optimal results upon radiation curing.

USI Chemical Silane USi-1301 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties - such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. USi-1301 also greatly increases water (vapor) and corrosion resistance.

EBECRYL® 767 is an acid-functionalized acrylic resin diluted with 38% isobornyl acrylate (IBOA) monomer. This light-colored, moderately viscous resin is designed as an adhesion-promoting additive and can also serve as a primer or top coat. It functions as a coupling agent and oligomer, contributing to improved adhesion. The resin comes with labeling claims of being low in carbon footprint (PCF), bisphenol A-free, solvent-free, and VOC-free. It offers features like faster cycle time, long pot life, low energy consumption, and low-temperature curing.