Products in Base Chemicals & Intermediates: Polyurethane Foams

Sehotech SP-240Y is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

PETOL® 160-3 is a propoxylated glycerol, polyether polyol triol with an average molecular weight of 1000.

AFEX™ TG30C is a base drying Oil called as Tung having three conjugated double bonds.

AFEX™ TG20C is a base drying Oil called as Tung having three conjugated double bonds.

WJESPOL 2300 used has general flame-retardant

WJESPOL 3200 is used as flame retardant

BioPolyol RD is a bio based polyol, mainly for rigid PU foam production. For rigid foam production this polyol is used in mixture with cross-linking polyols whose functionality is at least five. Our suggested ratio between Bio Polyol RD and cross-linking polyol is approx. 80:20 by mass. Polyol is synthesized from rapeseed oil. It contains only primary hydroxyl functional groups. Polyol is difunctional and Natural Oil Based with estimated bio carbon content ~ 83 %.

AFEX™ LN23C is a base drying Oil called as Linseed having two conjugated double bonds.

Eternal Materials 2040M is polyester for polyurethane foam.

AFEX™ TG23C is a base drying Oil called as Tung having three conjugated double bonds.

Sehotech SP-240P is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

EXAFLEX 3056 is a propylene oxide and ethylene oxide based trifunctional polyol, with an ethylene oxide end capping. It is made to be used to produce flexible PU slabstock foam on continuous line as well as on batch block.

AFEX™ LN30C is a base drying Oil called as Linseed having two conjugated double bonds.

Dimethyl Ether (DME) is used as propellant gas in the aerosol spray production and as blowing agent in the production of extruded polystyrene insulation boards (XPS) and production of polyurethane foam.

AFEX™ SB23C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

EXAFLEX 5034 is a propylene oxide and ethylene oxide based trifunctional polyol. The calibrated amount of ethylene oxide with high primary end groups gives extra reactivity with isocynates allowing it to be used for one shot HR molded foam using high pressure as well as low pressure machines. The HR molded foam using EXAFLEX 5034 are characterized by high resiliency and good surface properties.

EXAFLEX 3548 is a propylene oxide and ethylene oxide based trifunctional polyol. It is made to be used to produce flexible PU slabstock foam on continuous line as well as on batch block. It is designed to provide a better bounce and processibility compared to 3000 MW polyols.

Rokopol® iCan 4100 is a specialized, base polyether polyol dedicated to production of winter, assembly one-component foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 150-165 mgKOH/g, and dynamic viscosity within the range of 200-350 mPas at temp. 25°C.

Rokopol® M5000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-35 mgKOH/g and dynamic viscosity within the range of 700-960 mPas at temp. 25°C.

AFEX™ CR20C is a base drying oil called as Corn having no double bond.

EXAPOL SU 440 N/1 is sucrose – glycerine based polyether polyol of moderate functionality and low viscosity.

CA - 4020U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

EXAPOL SU 490 B is sucrose - glycerin based polyether polyol of moderate functionality and medium viscosity.

Sehotech SP-200 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

Maruzen Petrochemical MARUKASOL FH is a cyclopentane product uniquely developed by us. Since it shows a low rate of heat transfer, it is used as urethane-foaming agent. With its degrease-cleaning capability and drying property excellently balanced, it may be also used to clean metal parts and semiconductors.

Hydrochloric Acid 32% Solution is a clear, colorless, fuming liquid with pungent odor. It is the aqueous solution of hydrogen chloride gas, and a strong and highly corrosive acid. It is soluble in water, alcohol, and benzene. This product is industrial grade material, and designed for use in industrial applications.

AFEX™ CN20C is a base drying oil called as Canola having no double bond.

EXAPOL G 375 is a glycerin based trifunctional polyol of low viscosity and low hydroxyl value.

Sehotech SP-150 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

CA - 4010U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Bismuth neodecanoate is vital Materials supplies all manner of bismuth metal-based products ranging from bismuth ingots, needles, and shot in bulk, to all varieties of bismuth oxide which differ in particle size, shape, and other special properties. Vital Materials is also a supplier of bismuth compounds like bismuth sub-nitrate for catalyst production, bismuth citrate for dishwasher tablets, and also pharmaceutical compounds like bismuth subsalicylate and bismuth subgallate for the digestive system.

PETOL® 400-3 is a propoxylated glycerol, low viscosity polyether polyol triol with an average molecular weight of 440.

CA - 4030U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

PETOL® 250-3 is a propoxylated glycerol, polyether polyol triol with an average molecular weight of 670.