Products in Cleaning Aids: Synthetic

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Lutensol® ON 30 is a nonionic surfactant and 100% active alkyl polyethylene glycol ether made from a saturated synthetic short-chain fatty alcohol with approximately 3 moles of ethylene oxide. It is a high-performance surfactant with low toxicity and great emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XP 79 is capable of producing very high initial foam, making it ideal for institutional cleaning and sanitation. It is available in both 85% active product and 85% aqueous solution forms. In solid form, it is slightly yellow, while in liquid form, it is slightly pasty. The product contains no preservatives and is recommended for use with Glucopon® surfactants to synergistically reduce skin irritation in food service and kitchen hygiene applications.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Lutensol® XL 89 is an efficient and easy-to-handle wetting agent with a C10 guerbet alcohol alkoxylate POE (8) composition and 80% active content. It is synthetically derived and readily degradable. This product can provide improved performance compared to NP-9 in various in-can and tank mix applications. Lutensol® XL 89 is suitable for a wide range of formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable granules, and wettable powders.

Ethylan 1005 is a nonionic surfactant based on a synthetic primary alcohol.

DeCAL 2033 a novel multifunctional acrylic dispersing agent based on new technology - the grade is an ideal problem solving dispersant and is compatible with a wide range of organic and inorganic fillers and pigments utilized in water borne systems. It is a pale brown liquid. DeCAL 2033 can aid stability and prevent the precipitation of a wide variety of mineral salts, including calcium, magnesium, iron, aluminum, zinc, barium and chromium.

DeCAL 2032 a novel multifunctional acrylic dispersing agent based on new technology – the grade is an ideal problem solving dispersant and is compatible with a wide range of organic and inorganic fillers and pigments utilized in water borne systems. DeCAL 2032 can aid stability and prevent the precipitation of a wide variety of mineral salts, including calcium, magnesium, iron, aluminum, zinc, barium and chromium. It is a pale brown liquid.

DeCAL 2031 is a novel multifunctional acrylic dispersing agent based on new technology. The grade is an ideal problem-solving dispersant and is compatible with a wide range of organic and inorganic fillers and pigments utilized in water-borne systems. DeCAL 2031 is applicable in the coatings and adhesive industries but is also tailored to the agrochemical sectors, where it can be used as a stabilizer for concentrated emulsions, a dispersing agent for concentrated suspensions, and in the preparation of suspoemulsions.

Cola®Mid AL is a premium 100% active, liquid "super" amide. It is highly recommended for use in all types of shampoos, cleansers, bubble baths, and liquid detergents formulations where quality performance, extreme mildness and maximum ease of handling are required. This product is an outstanding solubilizer and coupler for essential oils and other additives, and offers excellent stability in systems ranging from pH 4 to 11.

Colonial AOS-40 is a pale yellow to light amber aqueous solution of sodium C14-16 alpha olefin sulfonate. Colonial AOS-40 combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid.

NEWPOL PE-71 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-78 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-68 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-64 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-62 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-61 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-108 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

It is a standard anionic surfactant. It is widely used as foam builder, wetting agent, surfactant, and dispersing agent in many applications. It is a highly concentrated sodium lauryl ether sulfate derived from natural fatty alcohols. Due to its high content of washing active substance, It is particularly suited for highly concentrated end products, or if raw materials with a lower water content are required.

iSURF DEA is light yellow or amber transparent liquid. It has quite strong capability in spumescence, soakage, decontamination and antirust. Moreover, it has better capability in dispersancy, steadying froth and adding mucosity.

Silsurf® CR 1115 is a high molecular weight water and alcohol soluble silicone polyether. It is used as a wetting agent, surface tension depressant and emulsifier in various personal care and industrial chemical formulations.

LAN-AQUA-SOL 75:50 aids solubilization of water-insoluble Lanolin derivatives, perfume, vegetable oil and mineral oil to form clear aqueous and hydroalcoholic systems

Mosselman PEG 400 Monooleate P (9004-96-0) Polyethyleneglycol esters are the products obtained by the esterification of polyethyleneglycols with natural fatty acids. Depending the molecular weight of the polyethyleneglycol used and the mono- and diesters content, non-ionic esters with different HLB values are obtained. Polyethyleneglycol es-ters are mainly used as emulsifiers for oil in water emulsions. They find also application in lubricants, textiles, pesticides etc.

Silsurf®A108 is a silicone glycol copolymer. It is used as wetting agent, surface tension depressant and emulsifier in various personal care and industrial chemical formulations.

Coco diethanolamide 90%

KALCOL® 6850 is a Cetearyl Alcohol (C1618:50/50 approx.) used as co-emulsifier and thickener.

FINDET® ARH/52 is a non-ionic surfactant - PEG-40 hydrogenated castor oil- is recommended for solubilizing hydrophobic additives like fragrances and special extracts.

KALCOL® 8670 is a raw material for surfactants, conditioners, disinfectants, and plasticizers; Oil base for lubricants of synthetic resin and emulsifiers of emulsion polymerization. It can be used as raw material for creams/ointment, metal rolling oil and in cosmetics, plastic lubricants, hand and body skin care, anti-oxidants, deodorants.

AMIDET® N is a high concentrated liquid surfactant - PEG-4 Rapeseedamide - which shows very good solubilizing and emulsifying properties. It presents better performance in terms of thickening and foaming than Cocamide DEA.

The ALKEST® CSO 400H is composed of surfactants resulting from the reaction of castor oil with ethylene oxide (EO). By increasing the degree of ethoxylation, the hydrophilic character of the molecule is increased (higher HLB), which represents increasing water solubility, cloud points and pour points. This product can be used as emulsifier, antistatic agent, lubricant and solubilizer in various markets and product applications.

The ALKEST® CSO product line is composed of surfactants resulting from the reaction of castor oil with ethylene oxide (EO). Depending on the number of ethylene oxide units (degree of ethoxylation), products with various values of HLB (hydrophilic-lipophilic balance) are obtained,allowing these products to be used in a wide range of applications.

The ULTRAPEG® product line is made up of ethylene oxide polymers. It is represented by the following general formula: HO(CH2CH2O)nH According to the degree of ethoxylation(n), products with different molecular weights and melting points can be obtained, which allows the use of these products in various applications. The hydrophilicity of the polyoxyethylene chain from the ULTRAPEG® product line allows for the obtention of a hygroscopic polymer which is highly water soluble. By varying the molecular weight, liquid or solid products may be obtained, covering a wide range of viscosities and consistencies.