Products in Cleaning Ingredients: Car Wash

Accoquat® CS-3000 functions as a solvent with multiple uses. It is easy to handle and may be used for water repellency, emulsification of oils, and hydrophobic materials, as an anti-static agent, fabric and textile softener, paper de-bonder, automatic car wash rinse aid and vehicle drying aid. It is manufactured in USA.

Accoquat® CS-5000 is a blend of cationic emulsifiers designed to produce micro-emulsions when combined with mineral seal oil (MSO). These micro-emulsions are most often used as the basis for car rinse-aids and other post-wash treatments in commercial and home applications. It is manufactured in USA.

Dequest® FS0520 is a specialty phosphonate that has been designed to support cleaning performance and provide effective scale inhibition in concentrated caustic solutions and/or high temperature operating conditions. Dequest® FS0520 is a high-performance alternative to Aminocarboxylates thanks to its high efficiency at low dosage and performance profile.

Dequest® FS0536N is a specialty phosphonate that has been designed to support cleaning performance and provide effective scale inhibition in the broad range of pH and chemical composition in the I&I cleaners. Dequest® FS0536N is a high-performance alternative to Aminocarboxylates thanks to its high efficiency at low dosage and performance profile.

MACKAM® CBS 50G is a high performance amphoteric surfactant that can be used in both homecare and personal care applications. It is compatible with anionic, nonionic, amphoteric, and cationic surfactants. In personal care applications, MACKAM® CBS 50G exhibits foam and mildness synergies with common anionics and can be used in place of Cocamidopropyl Betaine to boost flash foam and reduce eye irritation potential. In HI&I applications, MACKAM® CBS 50G exhibits high foaming even in high electrolyte solutions and is stable in 19% sodium hydroxide. MACKAM® CBS 50G is produced from coconut oil and is readily biodegradable.

Sauretaine CAB-30 is a coconut amido propylbetaine that works as a surfactant primary or secondary By its nature, amphoteric is extremely soft (non-irritant) towards the skin and mucous membrane. It shows excellent properties of detergency alone, and in combination with sulfated or ether sulfated alcohols areobserve a synergistic effect in terms of increased viscosity, foaming and compatibility. Sauretaine CAB-30 increases the effects of softness and conditioningof cationic surfactants, such as quaternary ammonium compounds.

Multitrope™ 810 is a cost-effective liquid anionic surfactant that serves as an excellent hydrotrope. It demonstrates compatibility with a wide range of surfactants. Multitrope™ 810 is especially beneficial in formulations with high pH levels or high electrolyte concentrations. Its applications encompass automatic and hand dishwashing, fabric and laundry care, hard surface cleaning, industrial and institutional cleaning, and vehicle care.

PEL-SIL™ 648 reduces the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. Even at concentrations as low as 0.01 percent, PEL-SIL™ 648 will reduce surface tension below 23 dynes/cm. It produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves. PEL-SIL™ 648 allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. It is a low molecular weight nonionic silicone polyether surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. PEL-SIL™ 648 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.

Niaproof® Anionic Surfactant 08 is an aqueous solution containing 40 percent by weight of sodium 2-ethylhexyl sulfate. It is a unique wetting assistant because of its solubility, stability, and penetrating action in strong acidic and alkaline solutions containing 10 to 20 percent of dissolved electrolyte. It is chemically stable even at the boiling point of 15 percent caustic solutions.

ECO Brij™ S20 MBAL is a 100% bio-based ethoxylated natural fatty alcohol based on stearyl alcohol chemistry and manufactured via the RSPO's Mass Balance System. This naturally derived surfactant offers a number of functional benefits, including wetting and high foaming, for a variety of applications.

PEL-PHOS™ 583 a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is compatible with the typical builders used including pyrophosphates, silicates, carbonates, etc.

PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provides good detergency in systems that require high cloud points. It is stable in both highly acid and alkaline systems offering utility in acid cleaners and heavily built detergents.

Burco® COPB-35 is a high foaming betaine surfactant that is stable in moderate levels of acid and alkali. It adds foaming and detergency to hand dishwash detergents, car wash detergents, and other cleaners/detergents. This product is compatible with anionic, cationic, and nonionic surfactants.

HoneySurf AG is produced via the natural fermentation process, how they are treated afterwards helps to determine their final usage and destination.

Burco® HCS-40HF is a high caustic and high acid stable, high foaming, amphoteric surfactant that provides improved wetting and detergency to alkaline systems. It is recommended for food plant cleaners, industrial cleaners, car wash detergents, acid coil cleaners, and concrete cleaners.

HoneySurf LF is produced via the natural fermentation process, how they are treated afterwards helps to determine their final usage and destination. Holiferm's low foaming (LF) products have no chemical modification and therefore can be used for a variety of applications from hard surface cleaners to face creams, shampoos and conditioners.

Burcomul™ 1055D is a cationic emulsifier for automotive rinse aid, spray wax, and wash-and-wax products. It gives stable microemulsions over a wide range of formulations and provides superior beading performance.

Burcofac™ PE-142 provides excellent wetting, detergency, and emulsification. It serves as hydrotrope for other surfactants, glycol ethers, hydrocarbons, and oils. This product is soluble in water and aliphatic solvents. It has moderate alkaline and electrolyte stability.

Burcosil™ XOP-LT is a silicone additive for foaming car wash rinse. It provides copious foam while delivering its protective ingredients.

BURCOXIDE® LO by Burlington Chemical Co is comprised of Lauramine Oxide and Dodecyldimethylamine oxide. It is commonly used It is a APE-free Key benefits in use include: Consistency, Foam enhancement, Foam quality and Formula stability.

BURCOTERGE™ PAO-35 is a clear liquid phosphated amine oxide (anionic) offering superior grease cutting and emulsifying properties. It provides a durable, clinging foam and corrosion inhibition.

Burco® DSA-9C provides a durable hydrophilic surface that sheets the water off for a quick drying, spot free finish when used as a final vehicle rinse additive. It is recommended for vehicle rinse aids and rinse additives for other hard surfaces.

Burcosil™ CAR is a silicone/carnauba additive for automotive spray wax and wash-and-wax products (cationic). It is recommended for car and truck spray wax, and car "wash-and-wax" consumer products.

Burco® RXB-20 is a foaming car wash rinse additive that provides copious foam while delivering its protective ingredients. It provides repellency against water and imparts outstanding shine.

BRB Sempure 3733 is a 40% cationic emulsion of an amino silicone fluid.

BRB Sempure 135 is a 35% micro-emulsion specifically developed for use in transparent, aqueous,hard surface cleaning products.

Burcofac™ 1060 is a free acid of organic phosphate ester (anionic) that provides excellent wetting, detergency, and emulsification. It is recommended for hard surface cleaners, laundry and dishwashing detergents, emulsion polymerization, floor cleaners and wax strippers, car and truck wash detergents, and agricultural chemical emulsifiers.

Burcofac™ PA-1150 is a free acid of organic phosphate ester (anionic) that provides excellent wetting, detergency, and emulsification and serves as hydrotrope for other surfactants, glycol ethers, hydrocarbons, and oils. It is recommended for hard surface cleaners, laundry and dishwashing detergents, emulsion polymerization, floor cleaners and wax strippers, car and truck wash detergents, and agricultural chemical emulsifiers.

Burco® DEO-46G is an amber liquid odor neutralizer concentrate that permanently eliminates unpleasant organic odors immediately upon contact, can be used as a “stand alone” product or can be incorporated into other products, and neutralizes odors through a covalent bonding mechanism instead of masking odors like fragrances, perfumes, and oils.