Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Composite Materials
Products in Composite Materials: Laminate
336 Products found in Composite Materials
Browse
Applications
Show All 7 Categories
Filters
Suppliers
Applications
Functions
End Uses
Processing Methods
Mechanical Properties
Products
Brands
Suppliers
Formulations
Documents
Relevance
Von Roll Isola
Vetronite® EGS T-23
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Vetronite® EGS T-23 is composed of epoxy matrix and glass fabric reinforcement. it appears in Olive gray color with EP GC 203/308 G-11 Standards.
The Gill Corporation
Gillfab® Gillfab® 1167 Type 1
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Gillfab® 1167 and 1167A are excellent impact resistant laminates made from fiberglass cloth reinforced phenolic resin. Gillfab® 1167 has a white polyvinyl fluoride film overlay on the face side and Gillfab® 1167A does not.
ISOVOLTA Group
ISOVAL® TU 21/FR4 (EP GC 21)
Polymer Name:
Epoxy Resins & Compounds
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Physical Form:
Tube
ISOVAL® TU 21/FR4 (EP GC 21) is made up of Flame-resistant, halogen-free round rolled epoxy glass fabric laminate tube with high strength for mechanical and electrical applications
Franklin Fibre
Lamitex® XX PF CP 23
Functions:
Laminate
Polymer Name:
Phenol Formaldehyde (PF)
End Uses:
Washer, Switch Gear, Terminal Boxes, Spacer, Power Transformers
Lamitex® XX PF CP 23 paper/phenolic laminated sheet and tubes offer high dielectric and very good mechanical strengths. Grade XX laminate and tubing are frequently specified for use in transformers, switchboards, mounting blocks, insulating panels, washers and spacers, and switchgear applications.
Rogers Corporation
RO3035™ Laminates
Functions:
Laminate
RO3000® high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. This family of products was designed to offer exceptional electrical and mechanical stability at competitive prices. RO3000series laminates are ceramic-filled PTFE based circuit materials with mechanical properties that are consistent regardless of the dielectric constant selected. This allows the designer to develop multi-layer board designs that use different dielectric constant materials for individual layers, without encountering warpage or reliability problems.
ISOVOLTA Group
ISOVAL® 11 HKB (EP GC 306 & 308)
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
End Uses:
Switch Gear
ISOVAL® 11 HKB (EP GC 306 & 308) is a High tracking resistance (CTI 600) glass filament fabric, construction material in electric appliances and switchgear, especially for applications where surface contamination occurs, Thermal Class H (180 °C). It an epoxy-glass-hard fabric made of a glass fabric, impregnated with a special, tracking current-resistant epoxy resin. This gives the material excellent heat resistance and chemical resistance.
Rogers Corporation
RO4835™ Laminates
Functions:
Laminate
RO4000 laminates are designed to offer superior high frequency performance and low-cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes. RO4003C™, RO4350B™, RO4360G2™, and RO4835™ laminates are available clad with the Ticer TCR Thin Film resistor foils. Ticer TCR clad RO4000 laminates are available in 0.5oz (18µm) thick foil with resistor values of 25, 50, and 100 Ω/sq(1). 1oz (35µm) thick copper foils are available as special order.
Isola
Isola IS550H
Functions:
Laminate
Reinforcement Material:
Glass Fibers
IS550H was developed in conjunction with a consortium of industry experts for high power & high voltage applications and PEV & HEV automotive electrification. The resulting solution addresses critical application needs for use in a harsh environment where very demanding, long term thermal reliability performance, extreme thermal cycling and very high voltage CAF & electro-migration resistance is required.
Von Roll Isola
Vetronite® EGS 103
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Vetronite® EGS 103 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green beige color with EP GC 203 G-11 Standards.
CIP Composites
CIP Composites CIP121
Functions:
Laminate
Polymer Name:
Polyester (unspecified)
Reinforcement Material:
Polyester
End Uses:
Marine Applications, Hydraulic Applications, Covers
CIP Composites CIP121 is a commonly used in general industrial applications, wet or dry, where high shock or edge loading is anticipated. 100% polyester material (textile and resin) with the solid lubricants molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.
Iten Industries
Resiten® C (0.062 in Thick)
Functions:
Laminate
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Resiten® C (0.062 in Thick) laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.
ISOVOLTA Group
VOLTIS ME® (MF GC 201)
Functions:
Laminate
Reinforcement Material:
Glass Fibers
VOLTIS ME® (MF GC 201) is a Tracking resistant laminate with melamine-resin-impregnated glass fabric, for mechanical and electrical applications. Low flammability.
Iten Industries
Resiten® CEM800 (0.125 in Thick)
Polymer Name:
Melamine Formaldehyde (MF)
Functions:
Resin, Laminate
Reinforcement Material:
Cotton
Density:
1480.0 - 1480.0 kg/m³
Resiten® CEM800 (0.125 in Thick) laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.
ISOVOLTA Group
ISOVAL® A (EP GC 201)
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
End Uses:
Printed Wiring Boards
ISOVAL® A (EP GC 201) is made With glass filament fabric for test adapters in printed circuit testing equipment. This gives the material a heat resistance up to 120 ° C, a very good chemical resistance. The high permanent temperature resistance of 155 ° C ensures good dimensional accuracy for use as an adapter plate. A layer of fine fabric in conjunction with a special resin results in the smooth surface and thus enables the finest holes.
Toray
Toray CFRT® PW-1000
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding, Vacuum Bagging, Out of Autoclave Prepreg
Toray Toray CFRT® PW-1000 is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven carbon and glass fibers in a plain weave for enhanced performance. The PW-1000 style laminate is available in a single-layer product; carbon in one direction and glass fibers at a 90° orientation to the carbon. This product is ultra-thin, lightweight, and resilient for improved energy return.
Rogers Corporation
RTduroid® 6010 2LM Laminates
Functions:
Laminate
Reinforcement Material:
Glass Fibers
RT/duroid® 6006/6010LM microwave laminates are ceramicPTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15 and RT/duroid 6010LM laminate has a dielectric constant of 10.2
Isola
Isola A11
Functions:
Laminate
Reinforcement Material:
Glass Fibers
A11 products bring the fabricator specific thermal characteristics appropriate for use in heat sink bonding, die cavity board (direct chip attachment) and multilayer rigid-flex applications.
Rogers Corporation
RO4700™ Antenna Grade Laminates
Functions:
Laminate
RO4700™ series antenna grade laminates are a reliable alternative to the conventional PTFEbased laminates.
Rogers Corporation
RO4830™ Laminates
Functions:
Laminate
RO4830™ thermoset laminates are well suited for price-sensitive millimeter wave applications, such as 76-81 GHz automotive radar sensors, and are a reliable, lower cost alternative to conventional PTFE-based laminates. RO4830 laminates have a slightly higher dielectric constant of 3.2 at 77GHz, versus PTFE-woven glass laminates. LoPro® reverse treated copper foil cladding contributes to RO4830 laminates’ excellent insertion loss at 77GHZ of 2.2 db per inch.
Franklin Fibre
Lamitex® G-7 SI GC 21
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Switch Gear, Power Transformers
Lamitex® G-7 SI GC 21 glass/silicone laminated sheets are primarily used for mechanical, electrical and electronic applications where high mechanical strengths are required at temperatures up to 220°C. G-7 exhibits extremely good dielectric loss properties under dry conditions and good electrical properties under humid conditions.
Rogers Corporation
RO3003™ Laminates
Functions:
Laminate
Rogers RO3000® series bondply is an undensifi ed version of RO3000 laminates that can be used to process highly reliable, homogeneous RO3000 multi-layer boards (MLB’s). The bondply is used in a manner analogous to prepreg in FR-4 constructions and, once bonded, becomes the equivalent of a normal RO3000 core layer.
Franklin Fibre
Lamitex® C PF CC 22
Functions:
Laminate
Polymer Name:
Phenol Formaldehyde (PF)
Reinforcement Material:
Cotton
End Uses:
Side Panels, Wall Panels
Lamitex® C PF CC 22 cotton/phenolic sheet is intended for use in mechanical applications requiring high impact strength. It has lower mechanical strength than materials with glass substrates, but has superior impact resistance when compared to paper based laminates.
Polyply Composites
Polyply Composites Polyply ChemBlok CR-900
Functions:
Laminate
Polymer Name:
Polyester (unspecified)
Reinforcement Material:
Glass Fibers
End Uses:
Wall Panels, Liners
Polyply Composites Polyply ChemBlok CR-900 are U.L. Listed, glass reinforced, UV inhibited composite sheets that offer excellent chemical and flame resistance wherever a cost effective general-purpose corrosion material is required. Example uses of this material, are Fume Hood Liners and Hockey rink walls.
Rogers Corporation
TC600™ Laminates
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Arlon’s TC600 is a woven fiberglass reinforced, ceramic filled, PTFE-based composite for use as a printed circuit board substrate. TC600 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and insertion loss. Lower losses result in higher Amplifier and Antenna Gains/Efficiencies. Mechanical robustness is also greatly improved for the 6.15 dielectric constant market.
Aekyung Chemical
Aekyung Chemical SL-112
Functions:
Laminate
Processing Methods:
Spray Lay-up
End Uses:
Tanks, Pools, Ducts, Tubs
Aekyung Chemical SL-112 is an ortho type UPR.
Atlas Fibre
Atlas Fibre G-7 Sheet
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Welding Tips, Spacer
Atlas Fiber G-7 Sheet is a continuous glass fabric laminated with a silicone resin. Grade G-7 is unequaled for high heat and arc resistant applications, and where good mechanical and electrical properties must be exhibited in humid conditions in excess of 450°F.
Isola
ASTRA® MT77
Functions:
Laminate
End Uses:
PCB Materials
Astra MT77 laminate materials exhibit exceptional electrical properties which are very stable over a broad frequency and temperature range. Astra MT77 is suitable for many of today’s commercial RF/microwave printed circuit designs. It features a dielectric constant (Dk) that is stable between -40°C and +140°C at up to W-band frequencies. In addition, Astra MT77 offers an ultra-low dissipation factor (Df) of 0.0017, making it a cost-effective alternative to PTFE and other commercial microwave laminate materials. Key applications include long antennas and radar applications for automobiles, such as adaptive cruise control, pre-crash, blind spot detection, lane departure warning and stop and go systems.
Franklin Fibre
Lamitex® X PF CP 21
Functions:
Laminate
Polymer Name:
Phenol Formaldehyde (PF)
End Uses:
Wall Panels, Washer, Spacer, Side Panels
Lamitex® X PF CP 21 paper/phenolic laminated sheet is primarily intended for mechanical applications. It has high relative mechanical properties but low electrical characteristics when compared to XX and XXX type materials. Special precautions must be taken to prevent cracking if the material is to be tapped or machined parallel to the laminations. Grade X laminate is frequently specified for use as mounting blocks or panels, washers and spacers.
Franklin Fibre
Lamitex® G-10CR/G-10 EP GC 21
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
End Uses:
Switch Gear, Power Transformers
Lamitex® G-10CR/G-10 EP GC 21 laminated sheet is a woven glass fabric composite impregnated with an epoxy resin. It is primarily used for mechanical, electrical and electronic applications where extremely high mechanical strengths are required at room and moderate temperatures. It is frequently specified for its excellent resistance to chemicals and retention of good electrical properties in dry and high humidity environments. G-10 is non-brominated and is not flame retardant and should not be confused with a similar glass epoxy grade FR-4, which is flame retardant.
Rochling Engineered Plastics
Glastic® SG-200
Functions:
Laminate
Glastic® SG-200 is a Durostone® Glastic laminate and has excellent mechanical properties at high temperatures, but does not meet UL 94 V-0.
Accurate Plastics, Inc.
Acculam™ Phenolkraft Paper X/XX
Functions:
Laminate
Acculam™ Phenolkraft Paper X/XX comprised of a phenolic resin binder and a saturating kraft (paper) substrate. It qualifies to NEMA X/XX and MIL-I-24768/11/12.This is a general purpose grade with good mechanical and electrical insulating properties. Its versatility, good machining characteristics and lower cost encourage its applications as switch plates, barriers, terminal strips, washers and other electrical components.
US Liner Company
Versitex® VX4
Functions:
Laminate
Polymer Name:
Polypropylene Compound (PP Compound)
Reinforcement Material:
Glass Fibers
Processing Methods:
Continuous Lamination
End Uses:
Wall Panels
Versitex® VX4 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.
The Gill Corporation
Gilliner® 1076D Type 20
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Bulkheads, Side Panels
Gilliner® 1076D is a high wear resistant Grade liner constructed from woven E-glass Cloth with a polyester resin system introduced specifically for use in the B737 lower sidewall. This product features resin rich surfaces to address wear through over frame sections and attach points that are associated with repetitive bulk cargo loading.
Atlas Fibre
Atlas Fibre G-3 Sheet
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Aerospace Seals, Gaskets
Atlas Fiber G-3 Sheet is an amber/brown material with a glass fabric reinforcement in a phenolic resin binder. G-3 is probably the strongest overall laminate with excellent tensile, compressive, impact, and flexural strength at elevated temperature.
Toray
Toray CFRT® AG18-2L
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding, Vacuum Bagging, Out of Autoclave Prepreg
Toray Toray CFRT® AG18-2L is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven glass fibers in a plain weave for enhanced performance. The AG-18 2L style laminate is available in a dual-layer product with glass fibers in both directions (0° & 90°). This construction is ultra-thin, lightweight, and resilient for improved energy return.
Toray
Toray Cetex® TC1000 Premium
Functions:
Laminate
Processing Methods:
Compression Molding
Toray Toray Cetex® TC1000 Premium is a high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU). With over 30 years in flight, Toray Cetex® TC1000 Premium is utilized in a consistently growing number of Applicationss. The material has gained a wide array of qualifications at Airbus, Boeing, and many other airframe OEMs. Compared to its semi-crystalline counterparts, Toray Cetex® TC1000 Premium can be used to achieve even shorter cycle times in part production. The material exhibits a superior bondability, which makes it very suitable for hybrid assemblies consisting of different materials. Toray Cetex® TC1000 is available as a UD tape and as a fabric prepreg, but is typically supplied in pre-consolidated reinforced thermoplastic laminates (RTLs) of varying thicknesses. Laminates and prepregs are available in black, cream white, gray, and natural (amber) resin colors. PEI (PolyEtherImide) Thermoplastic Resin System.
Show
36
of 336 results
Go to page
1
2
3
4
5
6
7
8
9
10