Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Composite Materials
Products in Composite Materials: Molding Compound
420 Products found in Composite Materials
Browse
Applications
Show All 7 Categories
Filters
Suppliers
Applications
Functions
End Uses
Processing Methods
Mechanical Properties
Products
Brands
Suppliers
Formulations
Documents
Relevance
Polynt Group
Polynt Group SMC 4800 RF HL3 R22/R23
Functions:
Molding Compound
Polynt Group SMC 4800 RF HL3 R22/R23 is generally used in railway sector applications.
Polynt Group
Polynt Group HUP 16/18 RS-7035
Functions:
Molding Compound
Polynt Group HUP 16/18 rs-7035 is generally used in building and construction, electronic and electrical applications.
Polynt Group
BMCarbon® 70CF45-6mm
Functions:
Molding Compound
Reinforcement Material:
Carbon Fibers
End Uses:
Pipes, Tanks
BMCarbon® 70CF45-6mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.
Globe Composite Solutions, Ltd
Brandonite® 4210-d30
Functions:
Molding Compound
Brandonite® 4210-d30 contains feature called Good performance-non toxic.
Polynt Group
SMCarbon® 90CF50-12K
Functions:
Molding Compound
Chemical Family:
Epoxy & Epoxy Derivatives
End Uses:
Pipes, Tanks
SMCarbon® 90CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.
Accurate Felt & Gasket
Voltoid® D-100
Functions:
Molding Compound
End Uses:
Instrument Panel, Electronic Insulation, Sound Absorption Material, Printer, Power Transformers, Appliances
Voltoid® D-100 is an economical electrical and flame barrier, including Underwriters Laboratories’ flame class rating of 94 V-0. D-100 is recommended for applications where long exposure to high humidity is not anticipated. It is a versatile material which can be riveted, stitched, stapled, and formed.
Menzolit Ltd.
Menzolit® BMC 2300
Functions:
Molding Compound
Polymer Name:
Thermoset Polyester
Reinforcement Material:
Mineral, Glass Fibers
Processing Methods:
Injection Molding
menzolit® BMC 2300 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.
Menzolit Ltd.
Menzolit® SMC 2400
Functions:
Molding Compound
Chemical Family:
Polyesters
Reinforcement Material:
Mineral, Glass Fibers
Processing Methods:
Compression Molding
menzolit® SMC 2400 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.
Quantum Composites
Quantum Composites QC-2550
Functions:
Molding Compound
Chemical Family:
Phenols & Phenolics
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Tanks
Quantum Composites QC-2550 is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.
Quantum Composites
Quantum Composites QC-8800
Functions:
Molding Compound
Chemical Family:
Polyesters
Processing Methods:
Compression Molding
Quantum Composites QC-8800 is a polyester hybrid ESC® molding compound designed for compression molding of components requiring high structural strength. It exhibits unusual toughness, and is suggested for applications subject to impacts and rough handling. QC-8800 is also suggested for applications requiring excellent fatigue resistance.
Von Roll Isola
Durapol® M600 SMC
Functions:
Molding Compound
Chemical Family:
Polyesters
Reinforcement Material:
Glass Fibers
Durapol® M600 SMC is composed of polyester matrix and Chopped glass fibers with rovind reinforcement. It appears in Green RAL 6019 color with UP GM 205 Standards.
Quantum Composites
HTC™ 9593
Functions:
Molding Compound
Chemical Family:
Polyimides (PI)
Reinforcement Material:
Carbon Fibers
Processing Methods:
Compression Molding
End Uses:
Tanks
HTC™ 9593 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.
Mar-Bal
Mar-Bal MB2000-15
Functions:
Molding Compound
Polymer Name:
Thermoset (unspecified)
Processing Methods:
Injection Molding, Resin Transfer Molding (RTM), Compression Molding
Mar-Bal MB2000-15 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.
Polynt Group
Polynt Group SMC LS 3300 R25 RF
Functions:
Molding Compound
Polynt Group SMC LS 3300 R25 RF is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for electrical application. SMC LS 3300 R25 RF joint good mechanical properties and good fire protection grade. SMC LS 3300 R25 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.
Polynt Group
Polynt Group VUP-4400103WH-20S
Functions:
Molding Compound
Polynt Group VUP-4400103WH-20S is generally used in home and domestic applications applications.
Resinoid Engineering Corporation
Resinoid Engineering Corporation Resinoid Compound 2002-4A
Functions:
Molding Compound
Reinforcement Material:
Other Reinforcement Material
Processing Methods:
Transfer Molding, Compression Molding
End Uses:
Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles
Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.
Sumitomo Bakelite Company
Sumikon® PM-9750
Functions:
Molding Compound
Processing Methods:
Transfer Molding, Injection Molding
Sumikon® PM-9750 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Sumikon® PM-9750 is certified as UL Flame Rated.
Polynt Group
Polynt Group BMC 1151 UL94 HB
Functions:
Molding Compound
Polynt Group BMC 1151 UL94 HB is certified HB 3,0 mm by UL laboratories. BMC 1151 Grigio is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.
Polynt Group
Polynt Group HUP 29/25 RB 1090 1B
Functions:
Molding Compound
Polynt Group HUP 29/25 RB 1090 1B is used in composites applications.
Quantum Composites
Lytex® 4181
Functions:
Molding Compound
Chemical Family:
Epoxy & Epoxy Derivatives
Reinforcement Material:
Carbon Fibers
Processing Methods:
Compression Molding
Lytex® 4181 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.
ATSP Innovations
ESTHERM™ MOLDING COMPOUND
Functions:
Molding Compound
Polymer Name:
Thermoset Polyester
Reinforcement Material:
Carbon Fibers
End Uses:
Gaskets, Automotive Components, Bearings, Valves, Fittings, Pump Parts
Estherm™ Molding Compound is accomplished by use of ATSP’s high glass transitiontemperatures (up to 310℃ unfilled) and high thermal stability vitrimer resins.Vitrimers are thermosets that due to possessing exchangeable bonds within theirbackbone chain have plasticity and bonding enabled at temperatures above their glasstransition temperatures. This allows fully cured thermosets to be molded and producechemically contiguous components that have excellent structural, tribological, andthermo mechanical properties.
Polynt Group
Polynt Group SMC LPMC 7200 Low pressure
Functions:
Molding Compound
Polynt Group SMC LPMC 7200 Low pressure is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7200 is studied to be molded at low pressure and has been developed for co-molding with phenolic foam. SMC LPMC 7200 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.
Polynt Group
Polynt Group SMC FC 4700
Functions:
Molding Compound
Polynt Group SMC FC 4700 is generally used in food contact applications.
Polynt Group
Polynt Group SMC LPA 2000 R27
Functions:
Molding Compound
Polynt Group SMC LPA 2000 R27 is a sheet molding compound based on an unsaturated polyester resin class “A” grade reinforced with glass fibers. This SMC has been developed for body panel application, with good mechanical properties and excellent surface. Good varnish adhesion and excellent gluing are other peculiarities of SMC LPA 2000 R27. SMC LPA 2000 R27 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.
ASTAR S.A.
Verkid® SMC H154
Functions:
Molding Compound
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Reinforcement Material:
Carbon Fibers
Processing Methods:
Compression Molding, Injection Molding
End Uses:
Semiconductor Applications
Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.
Menzolit Ltd.
Menzolit® SMC 1100
Functions:
Molding Compound
Chemical Family:
Polyesters
Reinforcement Material:
Mineral, Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Tanks, Doors, Door Panels, Side Panels
menzolit® SMC 1100 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.
Menzolit Ltd.
Menzolit® HPC 1200
Functions:
Molding Compound
Chemical Family:
Polyesters
Reinforcement Material:
Glass Fibers, Mineral
Processing Methods:
Compression Molding
End Uses:
Side Panels, Door Panels
menzolit® HPC 1200 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list
Quantum Composites
AMC® 8575 (woven)
Functions:
Molding Compound
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Reinforcement Material:
Carbon Fibers
Processing Methods:
Compression Molding
AMC® 8575 (woven) is a vinyl ester ESC® molding compound reinforced with 12K 2x2 Twill Carbon Fiber Fabric. It is designed for compression molding of components requiring high structural strength, light weight, and stiffness. It can also be comolded with other ESC molding compounds such as AMC® 8590 to provide stiffening in selected areas of the component.
Menzolit Ltd.
Menzolit® BMC 0390
Functions:
Molding Compound
Polymer Name:
Thermoset Polyester
Reinforcement Material:
Mineral, Glass Fibers
Processing Methods:
Injection Molding
End Uses:
Tubs, Sinks, Showers
menzolit® BMC 0390 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.
Polynt Group
Polynt Group HUP 12/34 RN Color
Functions:
Molding Compound
Polynt Group HUP 12/34 RN Color is generally used in automotive, foundries, mass transports, peroxides applications.
Quantum Composites
Quantum Composites QC-8700
Functions:
Molding Compound
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
Quantum Composites QC-8700 is a vinyl ester chopped E-glass fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance. It exhibits unusual toughness, and is suggested for applications subject to impacts and rough handling.
Quantum Composites
Quantum Composites QC-2150LD
Functions:
Molding Compound
Chemical Family:
Phenols & Phenolics
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Tanks
Quantum Composites QC-2150LD is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.
Starfire Systems
StarPCS™ SBMC-900
Functions:
Molding Compound
Reinforcement Material:
Carbon Fibers
Processing Methods:
Compression Molding
End Uses:
Rotors, Printed Wiring Boards, Airbrakes
StarPCS™ SBMC-900 are carbon fiber reinforced molding compounds containing a discontinuous carbon fiber, a specially formulated StarPCSTM polycarbosilane resin, and refractory particulate. SBMC-900 and SBMC-998 can be used in the cured state, but are specifically designed for use as a ceramic matrix composite (CMC) thermal or mechanical structure.
Polynt Group
Polynt Group HUP 13/35 RN Color
Functions:
Molding Compound
Polynt Group HUP 13/35 RN Color is generally used in building and construction, cosmetics, foundries, peroxides, railway sector applications.
Polynt Group
SMCarbon® 26CF40-12K
Functions:
Molding Compound
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
End Uses:
Pipes, Tanks
SMCarbon® 26CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.
Haysite Reinforced Plastics
Haysite Reinforced Plastics 46000
Functions:
Molding Compound
Chemical Family:
Polyesters
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Terminal Blocks
Haysite Reinforced Plastics 46000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.
Show
36
of 420 results
Go to page
1
2
3
4
5
6
7
8
9
10