Products in Reinforcements: Hand Lay-up

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Ecotechnilin L-FLAXDRY-UD180-30m² is a unidirectional fabric-180gr of flax/m².

G-PLY™ BX600S T3 is a biaxial +45°/-45° 616 gsm stitched glass NCF. The addition of threads at 0° increases the resistance of this reinforcement. This multiaxial fabric is intended in particular for the shipbuilding industry, primarily for infusion processes but also for HLU processes.

Muehlmeier E-glass mat E-CSM - powder bonded E-CSM 225 consists of cut and non-orientated E-glass strands which have silane size. The binding of the strands amongst each other happens by a powder mat binder on polyester base which is easily soluble in styrene. Working happens in the well-known contact – or continuous processes. The mat is suitable for UP, EP and vinyl ester resins.

Angeloni Group CBX-401 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

G-TAPE U395P is a unidirectional fiberglass tape with a continuous weft, with a total weight of 420 gsm. It is used in particular in the Marine industry to reinforce longitudinal parts (floor beams, omega profiles, etc.).

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

G-PLY™ BT830 T4 is a biaxial 0°/90° 844 gsm glass NCF. This multiaxial fabric is intended for the Marine industry, primarily for infusion processes but also for HLU processes.

ORCA CS MAT 1 1/2 OZ 25” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Owens Corning M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand lay-up or closed mold processes. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of fine-medium tex multi-chop strands randomly dispersed and bonded together with a highly soluble polyester powder binder. Certified by Lloyd’s Register on their website, the company lists itself as Lloyd’s Register and Det Norske Veritas.

DIAGONAP™ DT 20.40.1.01 is a triaxial glass fabric comprising of threestitched plies. It has a total weight of 858 gsm. This reinforcement is primarily used in theMarine industry.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

DIAGONAP™ DX 4001 is a biaxial glass fabric comprising of two stitched plies. It has a total weight of 828 gsm. This reinforcement is primarily used in the Marine industry.

ORCA CS MAT 3 OZ. X 10” ROLL (LBS). Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

G-PLY™ BX300S C4 is a biaxial +45°/-45° 332 gsm stitched glass NCF. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC600 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

G-PLY™ BX800S C3 is a biaxial +45°/-45° 810 gsm stitched glass NCF. The addition of threads at 0° increases the stablility of this reinforcement. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

P02 Powder Chopped Strand Mat is made of randomly distributed chopped E6 glass strands held together by an powder binder. P02 is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. P02 is designed for use in hand lay-up, filament winding, compression molding and continuous laminating processes. Its end-use applications include boats, bath equipment, automotive parts, chemical corrosion resistant pipes, tanks, cooling towers and building components.

G-Weave 505P is a plain-weave bidirectional 500 gsm glass fabric, balanced on both warp and weft.

ORCA CS MAT 1-1/2 OZ. X 60” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

ORCA CS MAT 1 1/2 OZ 12” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

G-TAPE U495P is a unidirectional fiberglass tape with a continuous weft, with a total weight of 550 gsm. It is used in particular in the Marine industry to reinforce longitudinal parts (floor beams, omega profiles, etc.).

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC300 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Natex 2D 700 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Plain 1/1 Natex® Fabrics with Laize 1000 mm and as 700 g/m2.

ROVIMAT™ 320P/300 is a 628 gsm stitched multi-layer product, comprising a 320 gsm fabric and a 300 gsm glass mat.

ORCA CS MAT 1 1/2 OZ 22” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

Owens Corning M130 chopped strand mat represents a general-purpose solution for open mold hand lay-up applications in a variety of industries. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium tex, chopped strands randomly dispersed and bonded together by a highly soluble polyester powder binder. Certified by Lloyd’s Register of Shipping (Pending).

Ecotechnilin L-FLAXDRY-BL150-30m² is a balanced fabric - 150gr of flax/m².