Products in Reinforcements: Pultrusion

AKSACA™ AC 2101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

D2-220-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

HexTow® AS4 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. AS4-GP 3k (1%), AS4-GP 12k (0.9%), and AS4 12k carbon fibers have been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.

AKSACA™ 12K A-49 is a High Quality Carbon Fiber.

Conformat® N720 is a continuous strand, glass fiber reinforcing mat. N720 is a semi-porous reinforcing mat developed specifically for pultrusion applications requiring reinforcement and enhanced surface appearance.

469L Roving is used in filament winding, pultrusion and weaving applications in polyester resin systems or vinyl resin systems. The direct rovings can be used to manufacture the optical cable reinforced core, pultruded profiles and multi-axial fabrics.

Muehlmeier E-glass mat E-CSM - powder bonded E-CSM 225 consists of cut and non-orientated E-glass strands which have silane size. The binding of the strands amongst each other happens by a powder mat binder on polyester base which is easily soluble in styrene. Working happens in the well-known contact – or continuous processes. The mat is suitable for UP, EP and vinyl ester resins.

G-TAPE U395P is a unidirectional fiberglass tape with a continuous weft, with a total weight of 420 gsm. It is used in particular in the Marine industry to reinforce longitudinal parts (floor beams, omega profiles, etc.).

CSV300/45 is Composite felt for pultrusion. It is composed of different types of woven fabrics, multi-axial fabrics and polyester surface felts bonded by hot melt adhesive powder. The weight is 200~900g/㎡, and the width is 50~1500mm. The products are widely used in the production of various pultruded woven products.

465 Roving is used in filament winding, pultrusion and weaving applications in polyester resin systems or vinyl resin systems. The direct rovings can be used to manufacture the optical cable reinforced core,pultruded profiles and multi-axial fabrics.

Superior Huntingdon Composites M8686 is this is a family of continuous filament reinforcing mats designed for phenolic pultrusion processes. They are treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity.

VOLUMAT™ 320P/300 (4) is a needle-punched multi-layer product comprising a 320gsm fabric and a 300gsm mat. VOLUMAT™ is used in pultrusion processes, most notably to manufacture large parts requiring mechanical properties.

StarRov® E-glass direct roving PR 80 300 076 is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for weaving process or the production of cores, especially multiaxial fabrics. The direct roving 076 has a good impregnation with polyester, epoxy and vinyl ester resins, low wear and guarantees high mechanical strength of the final product.

Muehlmeier E-CR glass - direct roving E-CR300 is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for winding and pultrusion. The silane size was optimized for the working with polyester, epoxy, phenol and vinyl ester resins. Compared to E-glass, E-CR glass has excellent chemical and thermal resistance and higher dielectric strength. Therefore the preferred uses are installations and containers for the chemical industry.

Conformat N751 is a continuous strand, glass fiber reinforcing mat. N751 is a semi-porous mat most frequently used for structural strength in flat or slightly contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. N751 functions equally well as reinforcement in both Pultrusion and Continuous Lamination processes. With the addition of an optional extra surface veil, N751 provides an outstanding surface finish.

D2-440-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Polyform Veil Mat PVM/300/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.

HexTow® IM8 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion where additional strength and modulus are required over IM7.

D3-200-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

Superior Huntingdon Composites M8643X4 is this is a family of continuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling properties and good weight uniformity.

HexTow® IM2C carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM2C fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. HexTow® IM2C is International Monohull Open Class Association (IMOCA) certified/qualified.

468HS roving is used in filament winding and pultrusion applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and gas cylinders.

HexTow® AS4D carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in prepregging, filament winding, braiding, and pultrusion

3B Fiberglass CM6060 is a non-wo-ven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 6060 & CM 6065 family products contain an insoluble binder compatible with a large range of thermoset matrices like both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) Both CM 60606 and CM 6065 mats are characterized by their white color and are ideally suited for pultrusion pro-cesses for wide, long and heavy parts but as well for narrow and complex pro_x005F_x001f_les. The excellent mechanical properties provided by 3B CFM combined with the good electrical properties of the resins make the pultruded parts attractive for the electrical apparatus (high voltage), transportation industries and infrastruc-tures equipments.

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

3B Fiberglass M 8643 is a non-woven mat made out of E-CR glass filaments, consisting of continuous fibers randomly oriented in multiple layers. The glass fiber is bonded with a silane coupling agent and the layers held toge-ther with a suitable binder. The M 8643 products contain an inso-luble binder compatible with a large range of thermoset matrices like both unfilled or filled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) and polyurethane (PU) resin systems. The M 8643 emulsion mat is ideally suited for pultrusion processes for wide, long and heavy parts but also for narrow and complex profiles. The excellent mechanical properties provided by 3B CFM combined with the good electrical properties of the resins (i.e. UP) make the pultruded parts attractive for the electrical apparatus (high voltage), trans-portation industries and infrastructure equipments.

ZOLTEK™ PX35 pultrusion is ideal structural reinforcement applications. Available in a variety of thicknesses and complex shapes, our pultrusion products deliver optimized properties with high fiber volumes, nearly zero void content, and locked-in filament alignment. ZOLTEK PX35 carbon fiber tows are fed into our proprietary impregnation and curing process which creates smooth carbon fiber laminates resulting in efficient laydown when building thickness. The specific fiber alignment achieved with pultrusion delivers consistently better overall properties in laminates than any other composite manufacturing process. Depending on the end application, these pultruded profiles are typically produced with a thermoset epoxy or vinyl ester resin in a proprietary lowcost, high-throughput process. Pultruded profiles are production-ready carbon composites for infrastructure applications, deep sea exploration, wind energy, and other applications benefiting from the unique properties of pultruded carbon fiber parts.

HexTow® AS7 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. AS7-GS 12k (0.5%) carbon fiber has been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.

HexTow® IM6 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM6 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.

G-TAPE U495P is a unidirectional fiberglass tape with a continuous weft, with a total weight of 550 gsm. It is used in particular in the Marine industry to reinforce longitudinal parts (floor beams, omega profiles, etc.).

Polyform Veil Mat PVM/425/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.

ROVIMAT™ 320P/300 is a 628 gsm stitched multi-layer product, comprising a 320 gsm fabric and a 300 gsm glass mat.

3B Fiberglass SE 1043 consists of continuous glass filaments bonded into a single strand and wound onto a bobbin shape without twist. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. Corrosion resistant SE 1043 Fibreglassmade of E-CR glass is specifi-cally designed for the manufacturing of composites pipes and under-ground & chemicals tanks. SE 1043 is also used in pultrusion to manufacture profiles and in weaving-knitting processes. SE 1043 is tested in compliance with BS 14020 and IS 11320.

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

Nattex 2L is a semi-finished product in natural fiber in the form of continuous technical flax fibers. It comes as roving direct in natural fibers with pure flax of 2g/m.