Products in Pigments & Colorants: 77492

Gelest Yellow Iron Oxide SS (YIA-SSA) is a yellow powder treated with stearyl triethoxysilane. This hydrophobic treatment imparts the excellent wetting properties of the shorter-chain silanes with a more emollient skin feel in powders and dispersed systems. It is a pigment that is used in various color cosmetic formulations.

Gelest Yellow Iron Oxide TC (YIA-TCA) is a yellow powder treated with triethoxycaprylylsilane. This alkyl silane coating provides a very hydrophobic surface that increases the ease of particle dispersion in natural and synthetic fluids and helps stabilize particles in emulsion systems.

Gelest Yellow Iron Oxide SR (YIA-SRA) is a yellow powder treated with trimethylsiloxysilicate. The hydroxyl-terminated silsesquioxane network in the coating improves adhesion to skin and hair, making it ideal for use in color cosmetic formulations. This pigment is the best candidate for use in long-wearing and water-resistant makeup.

Gelest Yellow Iron Oxide ML (YIA-MLA) is a yellow powder treated with dimethicone PEG-3 laurate. This treatment allows for high pigment loading, water repellency, and low viscosity dispersion to maximize color intensity. It is used in various color cosmetic formulations.

DCL 2820M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility, improved hiding, and lower oil absorption. 2820M is an offset to Bayferrox 1420M and is FDA-approved (Section 178.3297). It is recommended to be used in plastic and coating applications.

DCL 1820M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility and improved hiding. 1820M is darker and more red in shade compared to 1810M and it is FDA-approved under section 178.3297.

DCL 1810M Syn Micronized Yel Iron Oxide, PY.42, consists of lanox iron oxide and has superior dispersibility and improved hiding. It is FDA-approved (Section 178.3297), and has a wide range of applications, including use in plastics such as PVC and PE, as well as decorative and industrial coatings.

DCL 8820 Syn Yellow Iron Oxide, PY.42 consists of lanox iron oxide which has excellent chemical and weather resistance along with excellent opacity. This pigment is recommended for use in the construction industry for coloration of concrete. It can also be used on PVC plastics and decorative coatings.

DCL 8916 Transparent Yellow Iron Oxide, PY.42 is a high-performance transparent yellow iron oxide offering high color strength, weather resistance, and UV protection properties. 8916 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 2810M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility and hiding with lower oil absorption. 2810M is an offset to Bayferrox 3910M and is FDA-approved (Section 178.3297). It is recommended to be used in plastic and coating applications.

ECOTINT® SMART YELLOW OXIDE Y1 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® PREMIUM ORANGE IRON OXIDE OOX 1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® PREMIUM YELLOW OXIDE YOX 1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OXIDE YOX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® TO® TRANSPARENT RED OXIDE TR is the latest generation of binder-free universal colorant for interior and exterior applications. It is resistant to drying out and ideal for POS tinting utilizing environment-friendly, low-VOC technology (VOC <1 g/l). This product is very finely ground, making it exceptionally suitable for wood varnishes and gloss paints. At the same time, the transparent colorant does not affect important physical properties of the paint, such as weather resistance and UV barriers. Tight quality specifications of ECOTINT® TO® transparent oxides make it possible to use them both volumetrically for POS and gravimetrically for in-plant use.

ECONYL® YELLOW OXIDE YX3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® FACADE YELLOW OXIDE Y1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE YELLOW B2-YO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW OXIDE YX2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Aquaspersabil series consists of surface treated pigments with improved dispersibility into the water phase. They can achieve high loads by evenly distributing particles in the medium.

Bismica MAXs are pearl pigments that have a uniquely bonded combination of pigments, bismuth oxychloride and muscovite mica. These pearlescent pigments provide intense color impact. They are used primarily in pressed powders, eyeshadows and lip products.

BioGenic Magicolor 150 beads are produced through a unique, patented multi-layer encapsulation technology, offering a high load of iron oxide pigments (20-30%) and titanium dioxide. The pigment's true color is revealed upon application. This technology can be used in emulsion systems, pressed powders, and anhydrous lip products. Use levels vary depending on the desired color profile and formulation type. Particlesize: 200-300 µm.

BioGenic Magicolor beads are produced through a unique, patented multi-layer encapsulation technology, offering a high load of iron oxide pigments (40-50%) and titanium dioxide. The pigment's true color is only revealed upon application. This technology can be used in emulsion systems, pressed powders, and anhydrous lip products. Use levels vary depending on the desired color profile and formulation type. Particle size: 50-60 µm.

Bismicas are pearl pigments that have a uniquely bonded combination of pigments, bismuth oxychloride and muscovite mica. These pearlescent pigments provide vibrant color with a subtle satin luster. They are used primarily in pressed powders, eyeshadows, and lip products.

BioGenic MagicBead 200 Threecolors is a Single layer breakable capsule, Fluidized bed technology gives uniform particle shape and size.

BioGenic Magicolor 150 beads are produced through a unique, patented multi-layer encapsulation technology, offering a high load of iron oxide pigments (20-30%) and titanium dioxide. The pigment's true color is revealed upon application. This technology can be used in emulsion systems, pressed powders, and anhydrous lip products. Use levels vary depending on the desired color profile and formulation type. Particlesize: 200-300 µm.

BioGenic Magicolor beads are produced through a unique, patented multi-layer encapsulation technology, offering a high load of iron oxide pigments (43-53%) and titanium dioxide. The pigment's true color is revealed upon application. This technology can be used in emulsion systems, pressed powders, and anhydrous lip products. Use levels vary depending on the desired color profile and formulation type. Particlesize: 55-90 µm. The Magicolor 140 series provide a more naturally-derived coating option.

Bismicas are pearl pigments that have a uniquely bonded combination of pigments, bismuth oxychloride and muscovite mica. These pearlescent pigments provide vibrant color with a subtle satin luster. They are used primarily in pressed powders, eyeshadows, and lip products.

Bismica MAXs are pearl pigments that have a uniquely bonded combination of pigments, bismuth oxychloride and muscovite mica. These pearlescent pigments provide intense color impact. They are used primarily in pressed powders, eyeshadows and lip products.

BioGenic MagicBead 200COQ10/YD is a Single layer breakable capsule, Fluidized bed technology gives uniform particle shape and size.

BioGenic Magicolor beads are produced through a unique, patented multi-layer encapsulation technology, offering a high load of iron oxide pigments (40-50%) and titanium dioxide. The pigment's true color is only revealed upon application. This technology can be used in emulsion systems, pressed powders, and anhydrous lip products. Use levels vary depending on the desired color profile and formulation type. Particle size: 50-60 µm.

BioGenic MagicBead 200 Yellow is a Single layer breakable capsule, Fluidized bed technology gives uniform particle shape and size.

Isopropyl Titanium Triisostearate is a synthetic compound derived from fatty acid. When Iron Oxides are surface treated with Isopropyl Titanium Triisostearate, they display strong color development properties with increased adhesion to the skin. TPT is very reactive to almost all pigments and forms a uniform coating of lipophilic isostearate groups. There are abundant fatty ester groups on the treated surface; therefore, the titanate treated pigments can be easily wetted by and dispersed in organic vehicles, like esters, mineral oils or petrolatum. Oil absorption is substantially reduced, allowing the loading of pigments in the formula to be increased. TPT treated pigments are suitable for liquid foundations, lipsticks, blushes, eye shadows, and sunscreens.

MiyoAQUA is a hydrophilic surface treatment based on alginate. This anionic polysaccharide is found naturally in oceans around the world in the cell walls of brown algae and kelp. Inorganic pigments such as iron oxide and pigmentary titanium dioxide surface treated with sodium alginate are highly hydrophilic and provide excellent dispersibility and re-dispersibility into the water phase.

Primrose silica coated pigments are hydrophilic pigments that are ideal for O/W and water-rich systems. The silica coating, with a refractive index similar to human skin, provides a soft focus effect by increasing diffuse reflection. As the trends towards O/W systems continues, Primrose pigments help overcome some of the typical drawbacks of O/W systems such as gritty feel, weak color development, and wet/dry color stability. In turn, chemists will be able to formulate systems with the “fresh” watery feel of O/W systems with the added benefit of soft focus color pigments

ACT is a hybrid surface treatment consisting of vegetable derived amino acid, fatty acid metal soap and silane. Each component provides unique properties that synergistically make the ACT treatment one of the most effective treatments developed to date. (USP 6,482,441.) ACT treatment is applied to pigments and cosmetic substrates using Miyoshi America’s proprietary unique process, which allows for micronization and uniform surface treatment of individual particles