Products in Ready-to-Use Products: Gaskets

Turbo Seal Series 53 gasket makers can be used to replace conventional gaskets in a range of demanding industrial applications. The gasket maker compound cures in the absence of air between close fitting surfaces and will flex with minor flange movements. It is designed to prevent movement in rigid assemblies, for example flange assemblies.

Palm Labs Adhesives Turbo Anti-seize Aluminum is a gray, viscous metallic paste which may be used on all bolts, studs, value shafts, value assemblies, transmission shafts, and other types of assembly work where protection against seizing, galling or corrosion is desiRed. Turbo Anti-seize Aluminum will out perform many other anti-seize compounds such as graphite, oil, petroleum, silicone and lead pigments, due to the higher temperature range of this product. It is also slow drying, stays flexible, and withstands pressure to 5000 psi.

Turbo Seal Series 52 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces. Provides resistance to low pressure immediately after assembly of flanges.

ARcare® 8026 is a silicone transfer film adhesive between two polyester release liners.

SR8850-2 is a pure silver-plated copper filled conductive RTV silicone sealant. This one-component electrically conductive silicone adhesive cures at room temperature when exposed to atmospheric moisture.The material has no corrosive by-products and has good adhesion properties to metals, plastics, silicones, ceramics and glass. SR8850-2 is provided as a one-part electrically conductive elastomer silicone adhesive sealant with a compatible primer. The adhesive has a continuous operating temperature of 125°C while conductivity is maintained when exposed to temperatures up to 200°C. The silicone cures when exposed to atmospheric conditions. The typical curing schedule is 48 hours at 25°Cand 60% relative humidity.

Turbo Seal Series 51 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces. Provides resistance to low pressure immediately after assembly of flanges.

CGSTAPE - 2461 is a PTFE has smooth suitable for many advance applications. It is constructed with a PTFE coating on glass cloth fabric.

CGSTAPE - 2462 is a PTFE has smooth suitable for many advance applications. It is constructed with a PTFE coating on glass cloth fabric.

Turbo Seal Series 50 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces and will flex with minor flange movements. Provides resistance to low pressure immediately after assembly of flanges.

CGSTAPE - 2460 is a PTFE has smooth suitable for many advance applications. It is constructed with a PTFE coating on glass cloth fabric.

P-DERM® PS-1255 is a single coated silicone gel adhesive tape with a fleshtone elastic fabric carrier. PS-1255 is supplied with a 178 micron high density polyethylene liner.

NuSil™ CV-1500 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 3.0 ohm-cm, Primed Lap Shear 325 psi (2.2 MPa), 0.32 W/m-K.

NuSil™ MED-9031 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY GREASE.

P-DERM® PS-1240 is a 0.18mm thick silicone gel adhesive tape consisting of a silicone gel skin contact adhesive with a polyurethane film carrier. PS-1240 is supplied with a 100 micron matte blue polyethylene.

NuSil™ CV7-2289-1 is a controlled volatility potting and encapsulating silicone elastomer.

NuSil™ CV-2644 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.005 ohm-cm, 1.2 W/m-K.

Solution 450 RTV Silicone Sealant is a one-part acetoxy cure sealant that cures in the presence of atmospheric moisture to produce a durable and flexible RTV silicone rubber.

Haynes® Anti-Seize & Lubricating Compound is a premium food grade lubricant that meets FDA/NSF incidental food contact requirements. Haynes® Anti-Seize is odorless, colorless, tasteless, and stain-free. This multipurpose grease has a wide range of applications in and around the food processing industry.

NuSil™ MED-9021 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: NuSil™ MEDIUM CONSISTENCY GREASE.

Uni-Extreme™ High Temperature Sealer is a one-part sealant that can withstand extreme temperatures of -320°F to +2400°F continuous (3100°F intermittent) while maintaining a sure seal. Excellent adhesion makes it resistant to most chemicals, solvents, and electricity. Ideal for forming gaskets and sealing clean metal, stacks, flues, exhaust systems, engines, turbines, fire bricks, mortar, and ceramic surfaces. LEED Compliant.

Lamatek 25# Micro-Cellular Urethane Foam provide resilient impact and vibration absorption and can be easily compressed for sealing applications. These polyurethane foams are ideal for managing difficult tolerances and mount problems. With a low compression set, LS foams provide shock control and cushioning while maintaining constant gasketing, padding and sealing.

P-DERM® PS-1080 is a single coated silicone gel tape that has a fleshtone elastic fabric carrier. PS-1080 is supplied with a 178 micron high density polyethylene liner.

NuSil™ CV2-2644 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.004 ohm-cm.

NuSil™ MED-9011 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: LOW CONSISTENCY GREASE.

NuSil™ R-2160 is a red, high temperature silicone elastomer.

Lamatek Neoprene Sponge Gasket Tape SCE-43B is a closed cell blend of neoprene sponge, EPDM and synthetic rubber with a dense mass of tiny pores (or cells) to seal out air, moisture, liquid, gas, oil and more. Neoprene rubber tape is ideal for higher temperature applications where the seal isn’t frequently re-opened or broken. Lamatek’s neoprene rubber tape is available in several grades from soft to firm to absorb various weights and compression levels.

Pyra-SilTM 802 is a thixotropic grease that is widely used in harsh environments for lubricating and sealing vacuum and pressure systems, as well as chemical processing equipment. It has a translucent color and is used in many applications that operate between -40°C and -204°C (-40°F to 400°F), providing excellent thermal stability. Incure 802 is a non-toxic formulation that is also thermally and electrically insulating. Because of its low volatility, it can be used in deep vacuums.

3F North America PE Foam Tape One-Sided Self-Adhesive 30000 is a PE foam carrier in a variety of thicknesses and densities, standard coating with hot melt adhesive, very high initial and final adhesion, polyester stabilizing scrim embedded in pressure-sensitive adhesive.

Industrial-Grade Fiberglass Tape Style IG1250 offers superior insulating properties as well as low chloride content. Will resist most acids and alkalis and will remain unaffected by solvents and bleaches.

Basalt Tape Style VR1200PW is made from continuous filament volcanic rock fiber (basalt) for 1200°F thermal protection. It is used in aramid, fiberglass, and carbon fiber replacement, laminates, motorsport, and industrial end uses. It is made from continuous filament volcanic rock fiber.

Ultra Low Outgassing SCV-2585 is a ultra low outgassing potting and encapsulating silicone elastomer.

Premium-Grade Fiberglass Tape Style PG320 offers superior insulating properties as well as low chloride content. Will resist most acids and alkalis and will remain unaffected by solvents and bleaches.

NuSil™ R-2630 is a high durometer, RFI and EMI shielding RTV silicone.

Industrial-Grade Fiberglass Tape Style IG650 offers superior insulating properties as well as low chloride content. Will resist most acids and alkalis and will remain unaffected by solvents and bleaches.

P-DERM® PS-2076 is a 0.22mm thick silicone gel and acrylic trilaminate consisting of silicone gel skin contact adhesive, polyurethane film and medical pressure sensitive acrylic. PS-2076 is supplied with a 75 micron matte finish polycarbonate liner on the silicone gel adhesive side and an 78# bleached kraft siliconized liner on the acrylic side of the construction.