Products in Fluids & Lubricants: Mixtures & Blends

Biosynthetic® Motor Oil 5W-20 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.

Biosynthetic® Motor Oil 5W-30 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.

Valvoline Drive Train Transmission Oil C4 is blended from hydrocracked base stocks to meet the requirements of General Motors Allison Division specifications for C4 heavy duty automatic and power shift transmission fluids.

Valvoline ANTI-WEAR HYDRAULIC OILS VG 46 have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives.

Lubriplate® Auto/Marine Guard ISO Grade 7, Mineral oil is a moisture displacement, penetrating fluid and fogging oil.

SERVICE PRO® API SP-RC ILSAC GF-6A 5W-20 are high performance synthetic motors oils specially formulated to meet the stringent lubrication requirements of today's engines. These oils provide maximum protection against rust, corrosion, acid formation, sludge and varnish while yielding exceptional oxidation and low temperature performance. The API SP Resource Conserving specification protects against low speed pre-ignition and chain wear found in newer modern engines, while maximizing fuel economy. Always follow manufacturer’s recommendations for viscosity grade and API Service Category.

SERVICE PRO® PREMIUM AW HYDRAULIC OIL32 are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all major manufacturers and users of hydraulic equipment. These oils are characterized by outstanding rust protection, low deposit formation, good demulsibility, rapid release of entrained air, oxidation resistance, low pour points and good anti-foam properties. They also contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps. AW Hydraulic Oils are made from top quality base stocks and contain all the necessary additives.

SERVICE PRO® PREMIUM AW HYDRAULIC OIL 100 are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all major manufacturers and users of hydraulic equipment. These oils are characterized by outstanding rust protection, low deposit formation, good demulsibility, rapid release of entrained air, oxidation resistance, low pour points and good anti-foam properties. They also contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps. AW Hydraulic Oils are made from top quality base stocks and contain all the necessary additives.

Lubriplate® Flokool XX Cutting Oil ISO Grade 32, Mineral oil is a premium, heavy-duty cutting oil of the sulfur saponifiable type. LUBRIPLATE FloKool XX Dark Cutting Oil is medium in viscosity, possesses the proper type and percentage of anti-weld properties.

Valvoline Drive Train Transmission Oil SAE 10W is blended from hydrocracked base stocks to meet the requirements of General Motors Allison Division specifications for C4 heavy duty automatic and power shift transmission fluids.

WINTREX® heat transfer fluid is an inhibited ethylene glycol designed for use in hydronic systems for freeze and corrosion protection. The effectiveness of WINTREX® heat transfer fluid in preventing corrosion has been proven both in use and in laboratory testing. Using WINTREX® in place of brine solutions or uninhibited glycol/water solutions lowers maintenance costs and improves heat transfer efficiency.

Thermaflo® A is a high performance synthetic heat transfer fluid designed to meet the demands of liquid or vapor phase systems and indirect heat transfer. Operating temperature is 12°C to 400°C (54°F to 750°F) for liquid phase systems, 257°C to 400°C (495°F to 750°F) for vapor phase systems.

SERVICE PRO® API SP-RC ILSAC GF-6A 0W-20 are high performance synthetic motors oils specially formulated to meet the stringent lubrication requirements of today's engines. These oils provide maximum protection against rust, corrosion, acid formation, sludge and varnish while yielding exceptional oxidation and low temperature performance. The API SP Resource Conserving specification protects against low speed pre-ignition and chain wear found in newer modern engines, while maximizing fuel economy. Always follow manufacturer’s recommendations for viscosity grade and API Service Category.

Valvoline 101S is blended from selective mineral base oils, emulsifier and other additives to provide a stable well dispersed milky emulsion with water. It is suitable for mid to heavy duty cutting and it extends tool life and improves surface finish.

SERVICE PRO® PREMIUM AW HYDRAULIC OIL 22 are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all major manufacturers and users of hydraulic equipment. These oils are characterized by outstanding rust protection, low deposit formation, good demulsibility, rapid release of entrained air, oxidation resistance, low pour points and good anti-foam properties. They also contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps. AW Hydraulic Oils are made from top quality base stocks and contain all the necessary additives.

Lubriplate® 405 Cutting Oil ISO Grade 46, Mineral oil is especially recommended for use on low or high carbon steels, alloys and stainless steels where difficult conditions of service are encountered. The unusually high extreme pressure content of this active sulfur product provides optimum results in prolonged tool life, improved finish, more accurate cuts, greater production and reduced labor cost. Not recommended for brass, bronze, copper or aluminum. It is an outstanding dark pipe threading oil.

Lubriplate® GPO Motor Oil SAE 15W-40, Motor Oil is a heavy duty, extra high performance multi-grade engine oil that provides excellent protection in diesel fuel and gasoline engines over a wide range of operating conditions and performance demands.

Cutting and Grinding Fluids CG 5386 represents various combinations of sulfurized mineral oil with chlorine and fatty additives to provide excellent overall cutting performance in high speed heavy-duty machining operations on all types of steels. These transparent oils enable the operator to better observe the work in progress and the machine surfaces.

Delta Foremost® 1198 Break-a-way is a unique blend of solvent, dispersant, and penetrating ingredients composed of rust-preventative film-forming materials with excellent adhesion on metal surfaces. Distinctive characteristics include fingerprint-neutralizing, lubricating and water displacing properties. The rust preventative film is so thin as to be nearly invisible. Build-up is so light that it can be applied periodically to protect the finished steel surface of machinery in service. Foremost 1198 Break-A-Way contains no 1,1,1-Trichloroethane, CFCs or other ozone depleting substances.

Service Pro® Full Synthetic Multi-Vehicle Dexron VI Mercon LV ATF is a high performance multi vehicle automatic transmission fluid formally approved by Ford and General Motors. It is formulated to meet the stringent viscometric, friction, wear and oxidation stability properties required in passenger car and light truck transmissions.

WearMaster® KF 36 is a bonded dry film-based lubricant in an evaporative carrier.

Mighty Lube® Type SS3 is a thin film, anti-wear lubricant formulated to perform under the most demanding of conveyor applications. Specifically formulated for the coating industry, Type SS-3 shows high lubricicity and excellent paint and powder compatibility. Type SS-3’s water dispersion qualities make it ideal on wash lines and other locations where moisture can be a problem. Mighty Lube Type SS-3 is indicated anywhere maximum chain life is desired at temperatures of up to 500+°F.

WearMaster® KG 458 is a synthetic grease formulated with PFPE fluids and thickened with polytetrafluoroethylene.

Valvoline AW EHVI 46 is formulated from hydrocracked base stocks with inherent oxidation and thermal stability. To top it all, the product is further fortified with antioxidants, antirust, antifoam and anti-wear additives plus a special shear stable viscosity index improver.

SERVICE PRO® Automatic Transmission Fluid Multi-Purpose ATF is a multi-purpose automatic transmission fluid (ATF) and is recommended as a replacement fluid for automatic transmissions meeting original equipment manufacturer’s (OEM) performance requirements of General Motors, Ford, and other domestic and imported passenger cars, vans and light trucks where Dexron II, Dexron II-E, Dexron III-G, Dexron III, H Revision, Automatic Transmission Fluid, or Ford Mercon fluids are specified. It is also, recommended for Allison TES 389, C-3, C-4 applications, and Caterpillar TO-2 applications. SERVICE PRO® Automatic Transmission Fluid Multi-Purpose ATF is suitable for most power steering units. Other manufacturer suggested applications include mobile hydraulic and industrial systems, and rotary air compressors under certain service conditions.

Service Pro® Synthetic Blend SAE 15W-40 API CK-4/SN Engine Oil is formulated for use in high-speed four-stroke cycle diesel engines designed to meet 2017 model year on-highway and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines. This oil is formulated to use in all applications with diesel fuels ranging in sulfur content up to 500 ppm. Service Pro® SAE 15W-40 API CK-4/SN Synthetic Blend Diesel Engine Oil is designed to provide enhance protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate filter blocking, engine wear, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.

SERVICE PRO® API SP-RC ILSAC GF-6A 10W-30 are high performance synthetic motors oils specially formulated to meet the stringent lubrication requirements of today's engines. These oils provide maximum protection against rust, corrosion, acid formation, sludge and varnish while yielding exceptional oxidation and low temperature performance. The API SP Resource Conserving specification protects against low speed pre-ignition and chain wear found in newer modern engines, while maximizing fuel economy. Always follow manufacturer’s recommendations for viscosity grade and API Service Category.

Thermaflo® 59 (Ethyl Diphenyl Ethane plus Derivatives) is a reclaimed Alkyl Aromatic designed for moderate operating hot oil systems requiring low temperature pumpability characteristics.

WearMaster® KG 460 is a high temperature synthetic grease. It is a highly thermally stable product with excellent oxidation stability and excellent lubrication properties.

Mighty Lube® Type LDM Lubricant is a heavy duty anti-wear lubricant which is formulated to withstand extreme industrial conveyor applications as well as ambient temperature conditions. Type LDM Lubricant is specially designed to reduce and remove the particles left from other lubricants or oils on the conveyor ran in oven temperatures up to 550°F.

Valvoline ANTI-WEAR HYDRAULIC OILS VG 32 have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives.

Cutting and Grinding Fluids CG 5360 is a unique combination of extreme pressure agents, corrosion inhibitors, and ester additives that provide excellent cutting and grinding performance in multiple operations on all types of steels, including stainless. This transparent oil enables the operator to better observe the work in progress, and it has very low misting and odor characteristics as well.

Mighty Lube® Type CSM-2 is a heavy duty, anti-wear lubricant, which have been formulated to withstand the most extreme industrial conveyor applications. The use of the Mighty Lube Systematic Lubrication will result in a conveyor system that is protected against wear and corrosion over temperature ranges of 450°F with limited protection up to 1250°F.

WINTREX® HD heat transfer fluid is an inhibited ethylene glycol designed for use in hydronic systems for freeze and corrosion protection. WINTREX® HD is designed to extend fluid life where service temperatures are higher and the likelihood of thermal degradation is greater. It is sometimes also used in less demanding applications because the heavy duty inhibitors last longer, and maintenance requirements can be reduced.

SERVICE PRO® PREMIUM AW HYDRAULIC OIL 68 are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all major manufacturers and users of hydraulic equipment. These oils are characterized by outstanding rust protection, low deposit formation, good demulsibility, rapid release of entrained air, oxidation resistance, low pour points and good anti-foam properties. They also contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps. AW Hydraulic Oils are made from top quality base stocks and contain all the necessary additives.

Lubriplate® GPO Motor Oil SAE 10W-30, Motor Oil is an engine oil developed for use in four-stroke cycle diesel engines designed to meet 2007 and later EPA on-highway exhaust emissions standards. It is specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs), diesel oxidation catalysts (DOCs) and selective catalytic reduction (SCR) systems. It is backward serviceable for use in pre-2007 diesel engines and may be used in mixed fleets with both diesel and gasoline-fueled vehicles.