Products in Paints & Coatings: Polyureas

Arma 400 is two-component 100% solid cast urethane elastomer is recommended for high temperature applications where thermal stability is required. Often used for dump-truck beds, this product provides a hard, glossy surface necessary for smooth movement of cargo during tilt unloading.

ARMA 100 APU is a two component, polyurethane/polyurea elastomer system used for bedliners. This product provides a flexible but extremely tough monolithic membrane with excellent water and chemical resistance with a vast variety of other applications.

Arma 901-90AS (800% Elongation) is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Arma 103 is a low VOC aliphatic topcoat available to meet VOC regulations in specific areas. It is used in combination with Arma 101. It is used as a UV resistant topcoat for any of the Arma polyurea coatings, predominantly for RV roofs.

Arma 60A polyurea/polyurethane hybrid is waterproof, soft and rubber-like. It is skid-resistant and provides an extremely tough monolithic membrane for flexible surfaces. This product exhibits excellent abrasion and chemical resistance and contains no VOCs.

Marvel Industrial MarvelFlex is UV Stable, 100% Pure Polyurea aliphatic product is ideal for single application colorfastness combined with an extremely durable coatings product. Whites stay white, and colors stay true longer with this product.

Polylast 2000 is 100% Polyurea 2-component system, excellent physical properties, fast curing speed at room temperature, solvent-free, applied by spray. Waterproof material, with excellent chemical resistance and great durability. Material evaluated under the ANSI/NSI 61-5 Standard, to be used as a coating for drinking water tanks.

EPL™ 1.5 is a high-strength, self-leveling, semi-rigid polyurea elastomer. Due to its high tensile strength, tear strength,and tensile modulus, EPLTM 1.5 is very resistant to deformation with over 400% elongation. This optimal balance ofphysical properties makes EPLTM 1.5 an ideal choice of polymers for filling or repairing construction joints, randomcracks, joint faces, and spalls. EPL-1.5TM is formulated to be processed through a SPI Synergy Series proportioner suchas the LPGTM or TI-13DTM.

PRECIDIUM™ 2100 is a 100% solids, high-performance, two-component polyurea elastomer ideally suited for flooring applications where self-leveling properties are advantageous. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties. PRECIDIUM™ 2100 is a self-leveling system intended for use as a seam or system repair or membrane.

ASTC 1006 Polyurea Spray is a two component, high wet-out, long open time, aromatic MDI or TDI prepolymer and multifunctional polyurea amine blend. The polymer system is "pure polyurea" and is not modified using urethane or other additives.

AQUASEAL™ is a state-of-the-art, high performance, spray applied plural-component 100% pure polyurea elastomer.This system is based on amine-terminated polyether resins, amine chain extenders, and MDI prepolymers. It providesa flexible, resilient, tough, monolithic membrane with water and chemical resistance.

Arma 901-50DS is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Prokol Protective Coatings ProFast Flooring is an autocatalytic floor coating based on polyurea combinations. This unique floor coating is color-fast and can be used for in and outside applications. It is up to 3 times more wear and scratch-resistant than epoxy and polyurethane coatings, cures fast and can be applied with a roller or brush.

CHEM-THANE DCP RR is a fast curing, two component aliphatic polyaspartic polyurea topcoat. It has superior color and gloss retention and meets or exceeds SSPC Paint Specifications 36, 38 and 39 Level 3 weathering performance requirements.

ELASTAFLEX™ 1.0 is a economical blend of aliphatic and aromatic polymer chemistry with greater color/glossretention and more UV resistance than aromatic polyureas*. ELASTAFLEXTM 1.0 is formulated to be processedthrough a SPI Synergy proportioner such as the LPGTM.

Onyx Concrete Coatings Polyaspartic 90 is a two component, high solids, aliphatic polyaspartic finish floor coating, formulated to give the highest solids content with the lowest viscosity 90% solids and 0-V.O.C. Polyaspartic 90 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT), for durability, stain resistance, and a finish coat which beautifies concrete for years simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

Perdure P72 is a new generation fast-curing, two-component, poly aspartic aliphatic polyurea formulated to be used as a sealer or topcoat for interior or exterior use over properly prepared concrete or resinous flooring systems. Perdure P72 has excellent penetration and bond strength to properly prepared surfaces, UV resistant, abrasion, impact and wear-resistant.

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

POLY HYBRID (CLEAR) is a two-component poly aspartic-polyurea clear coat providing a high-gloss finish. This product combines extreme chemical, abrasion and UV resistance with fast-cure properties. Clear Poly Hybrid is ideal for exterior or rapid turnaround installations in temperatures as low as 20˚F

UREA-TUFF 4260 is a two-component, liquid-applied hybrid polyurea elastomer designed for use as a mix-in-the-bucket, but yet rapid-curing, monolithic waterproofing membrane. is a solvent-free aromatic polyurea-polyurethane elastomer containing no tar or asphaltic extenders.

HARD CAP™ 100 spray-applied, plural-component, 100% pure polyurea is an ideal choice when a durable high buildcoating for interior and exterior applications with excellent color stability and gloss retention is required. HARD CAP™100 provides a flexible, resilient, tough, monolithic membrane with good water and chemical resistance.

Marvel Industrial MarvelSpecialty Aliphatic 75 is UV Stable, 100% Pure Polyurea aliphatic product is ideal for single application colorfastness combined with an extremely durable coatings product. Whites stay white, and colors stay true longer with this product.

POLYQuik® P-500 is a two-component aromatic 100% solids sprayable polyurea elastomeric coating with extended working time and high abrasion resistance, possessing high elongation, and resistance to abrasion, corrosion, and a wide range of chemicals. POLYQuik® P-500 can receive a broadcast of aggregate for slip resistance.

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

CTM Coatings UCT-PU polyurea primer is a two-component, 95% solid, VOC compliant, polyurea hybrid that was developed as a primer/basecoat for a variety of coating systems. It provides outstanding adhesion on many substrates and performs well in a wide range of temperature conditions. This system has been approved by the Canadian Food Inspection Agency (CFIA).

AQUASEAL™ HI RISE X3 is a unique elastomer that expands approximately 300% of its original volume duringthe spray application. In place yield is ±50 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOADTMgun. As X3 rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied toporous surfaces such as vertical poured concrete and concrete masonry units (cmu). X3 is formulated with the “ULTRABONDTM” molecule therefore is self-priming in most instances.

AQUASEAL™ HI RISE X5 (X5) is a unique elastomer that expands approximately 500% of its original volume duringthe spray application. In place yield is ±80 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOAD™gun. As X5 rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied toporous surfaces such as vertical poured concrete and concrete masonry units (cmu). X5 is formulated with the “ULTRABOND™” molecule therefore is self-priming in most instances.

POLYSHIELD HT™ SLOW FC is a state-of-the-art, high- performance, sprayed, plural-component, pure polyurea elastomer,that is compliant with FDA 21 CFR 175 300 (c)/ (d) high temperature, heat-sterilized, non-acid aqueous food contact.This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides aflexible, tough, resilient monolithic membrane with water and chemical resistance.

Arma 120 is a two-component, 100% solids polyurethane elastomer. It is equally effective under dry abrasive and/or corrosive environments. This product is potable water coating certified.

CTM Coatings PACT-9500 is a two-component, 95% solids, VOC compliant, polyaspartic coating that was developed as a low odor topcoat. The product contains a UV protector. It provides a glossy finish with superior chemical resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA).

K5™ HI TEMP is an ultra high-strength, high-elongation polyurea, originally developed as a resilient blast resistant polymer. Soon after, it was discovered that K5™ is exceptionally resistant to abrasion, compared to other spray applied coatings. K5™ HI TEMP can be sprayed on to virtually any surface configuration, at any thickness. Therefore, it can be selectively applied to high wear areas.

POLYQuik® P-700 is a two-component, aromatic, sprayable pure polyurea elastomeric coating. It is used as a highly elastic, waterproof protective coating for both vertical and horizontal surfaces. It is specially formulated for excellent overcoat adhesion to geotextiles and old coatings with minimal surface preparation. Use POLYQuik® P-700 where regular dynamic movement is expected. POLYQuik® P-700 can receive a broadcast of aggregate for slip resistance on horizontal surfaces.

Onyx Concrete Coatings Polyaspartic 100 is a two component, high performance aliphatic polyaspartic finish floor coating. It is 100% solids and 0-V.O.C. The absence of solvents and almost no odor allows it to be applied in occupied areas. Polyaspartic 100 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT). For durability, stain resistance, and a finish coat which beautifies concrete for years, Polyaspartic 100 is simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

EPL™ 4 is a slow set, self-leveling 100% pure polyurea elastomer.

Marvel Industrial MarvelShield M590 was produced for those looking for a high Shore D hardness with a slightly slower setup time allowing the product to “settle” into place.

CTM Coatings PACT-8000 is a two-component, 83% solids, VOC compliant, low odor, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA) and meets FDA and USDA requirements.