Products in Paints & Coatings: Stainless Steel

Clearclad Lectraseal Tektor has same properties as the lectraseal system, but with additional dry film lubricants to increase wear and scratch resistance. PTFE, molybdenum sulfide and boron nitride incorporated into the coating increases the coatings scratch and wear resistance.

Loxon, the “work horse” of the appliance industry, is a blend of high-tech polymers specifically synthesized and produced for metal decorating applications. Loxon has been developed to meet new appliance specifications. It has superior resistance to laundry group detergents and new generation spot removers. Loxon has passed virtually all other chemical resistance tests called for in the appliance industry.

Metabond is a new class of decorative coating originating from a polyester backbone which is blended with a high quality durable cross-linker. This blend of high tech formulating combines with the best in available raw materials to yield MBI series, the coating with excellent weatherability, chemical resistance, gloss, abrasion resistance and ease of printing.

Loxon, the “work horse” of the appliance industry, is a blend of high-tech polymers specifically synthesized and produced for metal decorating applications. Loxon has been developed to meet new appliance specifications. It has superior resistance to laundry group detergents and new generation spot removers. Loxon has passed virtually all other chemical resistance tests called for in the appliance industry.

ATP® 641 is water-based, ceramic coating formulated to protect stainless, low alloy, & carbon grade steels against oxide scale, oxidation, and decarburization.

Master Touch 9810 Series is a heavy duty modified aluminum alkyd enamel that provides a very tough and durable high performance satin finish to protect surfaces from rust and corrosion. Can be use on a variety of interior and exterior substrates including wood and ferrous metal surfaces. This product is single component, but can be cross-linked with our 8000 Polyurethane Converter when stringent specs require extra gloss, color retention, and corrosion resistance.

Metabond is a new class of decorative coating originating from a polyester backbone which is blended with a high quality durable cross-linker. This blend of high tech formulating combines with the best in available raw materials to yield MBI series, the coating with excellent weatherability, chemical resistance, gloss, abrasion resistance and ease of printing.

NANOMYTE® TC-4001 is a single component formulation designed to protect metals from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping, and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils.

4719 Top Coat Clear is a blend of “high tech” polymers specifically synthesized and produced for metal decorating applications. It has been developed to meet new appliance and automotive specifications. It has superior resistance to laundry group detergents and the new generation spot removers.

Stainless steel primer is used to promote adhesion to stainless steel and other coated metals. By applying a small amount of GB primer to your product, adhesion improves significantly. Proven to pass scratch, tape, and wash tests.

Miller-Stephenson Chemical 850G-102X Waterbased Fluoropolymer Coating is designed to optimize strength, durability and lower coefficient of friction for specific specialty medical products. \ There are one and two coat options for customers who require specific technical challenges Our next generation water-based, Non-Cr(VI) fluoropolymer coating, designed to optimize coating adhesion, durability, and corrosion resistance while minimizing coefficient of friction. Our world-class fluoropolymer chemistry delivers unmatched lubricity and adhesion on all medical guide wires in the ease a one-coat system and a safe non-Cr(VI) system. In practice, medical personnel will feel smooth, low-friction movement as the guidewire progresses through the vasculature.

Miller-Stephenson Chemical 850G-104X Fluoropolymer Medical Coating is a water-based, medical coatings which offer next-generation performance, surface adhesion, durability, and superior surface smoothness all while eliminating the use of chromium-VI. Our world-class fluoropolymer chemistry delivers unmatched lubricity and adhesion on all medical guide wires and devices. The 850G-104X not only provides our smoothest surface finish but does so with an average film thickness of only 6-12 microns. In practice, medical personnel will feel smooth, ultra low-friction movement as the guidewire progresses through the vasculature.

CERTESS® NITRO T is an aluminum doped titanium nitride coating to increase maximum operating temperature with optimized density to limit columnar growth.

Advenira® AdvenGuard™ SDN® Nanocomposite Coating has been developed as a high performance barrier coating for corrosion protection applications. AdvenGuard™ can be used in conjunction with conversion or galvanic coatings or primers, when required, to provide superior corrosion protection.

HTAF-308 Anti-Fog Coating is translucent, blue anti-static coating that provides a flexible, conductive surface on polycarbonate, PET, and other substrates.

Infinium A is a multilayer Aluminum Titanium Nitride based coating. Infinium A development-based coatings are the most significant advancement in wear coatings since the introduction of Titanium Nitride. Infinium A addition to the coating not only increases cold and hot hardness but also can double the maximum operating temperature of Infinium A coated components.

ARMORGUARD SR with Stain Defender™ premium coating system manufactured by Titan Coatings, Inc. is a high end coating designed for improved scratch, mar, and environmental stain resistance. This exterior system uses a proprietary resin formulation and Titan’s exclusive Stain Defender™ technology to help keep siding products cleaner and looking new longer. ARMORGUARD SR has excellent exterior durability and chalk resistance while maintaining excellent decal adhesion for the RV/cargo hauler and truck trailer markets.

XP61-C is an advanced high emissivity, thin film, spray applied ceramic boiler coating that has been specifically formulated to provide protection in severe corrosive environments while increasing thermal efficiency. Efficiency is accomplished by increasing thermal transfer through the process tubing.

Calico® D is a Nanocomposite structure. This is accomplished by embedding nanocrystalline AlTiN grains into an amorphous matrix. This advanced Nanocomposite Technology has allowed the formation of a higher nanohardness coating with greater thermal stability than any conventional coating typically used in extreme environments. Calico® D is normally applied to steels and hardened steels where high wear resistance is needed. It can be stripped and recoated.

TRANSGUARD is an environmentally friendly, low V.O.C. water-based coating that provides unprecedented levels of corrosion resistance in a thin film application. Formulated with unique polymer technology, Titan’s water based epoxy has excellent adhesion over aluminum, steel, and galvanized substrates. Optimum corrosion protection is achieved when coated over shot blasted metal or metal that has been cleaned and treated with iron or zinc phosphate. TRANSGUARD is the only water based epoxy primer approved by PACCAR for all substrates.

Delta® AntiCor DTS 2K - SG 40 is a type 2K polyurethane paint based on acrylic / containing solvents.

Design Polymerics 2540 - Black Protective Coating is water based protective coating formulated with an EPA Registered preservative that helps resist the growth of mold, mildew, and fungus on the surface of the coating. 2540 - Black Protective Coating form a durable, flexible film over metal, fiberglass insulation, drywall, and wood used in HVAC and general construction applications.

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

ARMORGUARD XD premium coating system manufactured by Titan Coatings is a high end polyester coating designed for warranted exterior building product applications. ARMORGUARD XD uses proprietary resin technology and selected high durability, long-lasting pigmentation. It is formulated for excellent U.V. resistance and weatherability, along with good stain and chemical resistance.

Permashield 100 is a one-component, water-based, crosslinked acrylic/urethane coating. It exhibits outstanding resistance to harsh environmental conditions, and has exceptional film hardness. Permashield 100 is elastomeric and displays superior resistance to impacts, abrasion, corrosion, UV exposure, hot tire pick-up and household stains and chemicals.

Performance Polymers IPS 100 is a single component, ambient curing, inorganic polysiloxane finish. High performance novel technology which is solvent free (100% solids) coating. Fully inorganic chemistry provides outstanding resistance to UV degradation & tough environmental conditions. IPS 100 coating has environmentally friendly properties including ultra-low VOC level and an amine, isocyanate, tin & heavy metal free formulation. Curing from ambient conditions to a hard & durable finish. IPS 100 has unique novel inorganic chemistry resulting in ultra-high UV resistance, hydrophobic, low dirt pick up, anti-graffiti properties & easy maintenance with single pack technology. IPS 100 is formulated to provide color finishes which are superior performing in gloss & color retention resulting in high levels of resistance to severe weather conditions without degradation.

Calico Coatings CT-606 is a PFA gray non-stick coating that offers high temperature resistance, excellent release and abrasion resistance. This coating is designed for industrial/medical processing, chemical handling, and commercial cookware applications.

Hardide-A is a REACH-compliant alternative to hard chrome plating (HCP) and high-temperature oxidation (HVOF). Hardide® is a line of low temperature CVD (chemical vapor deposition) tungsten carbide/tungsten metal matrix composite coatings that are designed to extend the life of critical metal components. The coatings are tough, ductile, and impact resistant, with a unique combination of abrasion, erosion, and chemical resistance.

Akron Coating and Adhesives ACA-10-414 is Flexible non-conductive coating for metals. A water based flexible non-conductive coating for spray application to electronic parts, and for gravure coating onto metals as insulation of parts in electronic assemblies.

CC-158HS Primer is a 1.54 refractive index Water Based Primer formulated to enhance adhesion of many types of coatings on plastic substrates.

UV PRO 310 is a 100% solids, ultraviolet-light curable hard coat formulated to provide maximum abrasion and chemical resistance on rigid polycarbonate and other plastics.

S-28-1 Hardcoat is a 1.44 index solvent-based hardcoat that provides a rigid, abrasion resistant surface on polycarbonate substrates.

HP-300 Matte/Satin is a 2 component coating system having antimicrobial properties. This product is odorless and non-flammable. Primer is not required and is slip resistant certified.

Thermaguard™ CUI 650 is a third generation, pure inorganic single component, ambient curing polysiloxane coating formulated specifically to provide corrosion protection to under insulation environments where wet & dry cycling can occur. The coating conforms to the NACE SP0198-2017 classification, inert multi polymeric matrix coatings for Corrosion Under Insulation (CUI) in both cryogenic & elevated temperature applications. Through specific formulation technology Thermaguard™ CUI 650 can withstand temperatures from -196 to 650°C, fully curing at ambient conditions eliminating the need for heat curing prior to service. Thermaguard™ CUI 650 has exceptional resistance to thermal cycling, hot saline water immersion & chemical exposure throughout its operating temperature range. Thermaguard™ CUI 650 can be used in both OEM (shop application) & maintenance work due to having surface tolerance to rusted steels which have been marginally prepared (St 2/3). Additionally, the product can be applied in service to hot equipment operating up to 260oC, removing the need for plant shut down periods.

CERTESS® NITRO TC is a carbon doped titanium nitride coating to decrease friction with optimized density to limit columnar growth.

HP-105 is a 2 component coating system having antimicrobial properties. This product is odorless and non-flammable. Primer is not required and is slip resistant certified.