Products

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Dragonsorb® 3039 is a liquid UV absorber with a stable morphology. It has good compatibility with all common plasticizers. This product is especially suitable for the stabilizers of PVC-P and PVC plastisol. It can also be used in polyurethane (PUR), polyester, polymethacrylate (PMMA), and other materials to improve the weatherability of the materials under UV conditions.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Dragonsorb® 320 is a highly effective light stabilizer that features strong UV absorption, low volatility, and excellent compatibility with a variety of substrates. It protects polymers as well as organic pigments from UV radiation, which helps preserve the original appearance and physical integrity of molded articles, films, sheets, and fibers during outdoor weathering. This product is slightly more discoloring than conventional UV absorbers. It can be used for a variety of plastics and other organic substrates, including unsaturated polyesters, PVC, and PVC plastisol. Additionally, good results are expected when this product is used in polycarbonates, polyurethanes, polyamides, and synthetic fibers, particularly those with a polyester, epoxy, or isocyanate resin base.

Dragonox® 1315 is a low-viscosity liquid-type antioxidant. Due to its alkyl chain, this product has a broad compatibility range and is soluble in various substances. It is an excellent antioxidant for polymers (such as PVC, ABS, etc.), lubricating oil, and polyurethane foam.

Flyadd® AY1 is a color stabilizer and anti-yellowing agent. It is used as a polymer additive for polyurethane and is a highly effective additive for many kinds of dispersed polymer systems. This product has the potential to improve color and heat stability in processing and end applications. 

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flyadd® AY3 is a liquid-type blend anti-yellowing agent that can inhibit the yellowing of the polyurethane caused by high-temperature processing. It has excellent ultraviolet absorption performance, which can effectively improve the weatherability of the product and inhibit the yellowing caused by thermal oxygen and ultraviolet light.

Dragonox® PDP is a liquid-type antioxidant with good color and heat stability. This product is widely used in polyvinyl chloride (PVC), acrylonitrile butadiene styrene (ABS), polyurethanes (PU), polycarbonates (PC), and coatings.

Dragonox® 1135 is an excellent antioxidant that may be used in a variety of polymers. Because of its low volatility and excellent compatibility, it is particularly well suited for use in forced air cooling processes for PU. This product is used in the stabilization of PV flexible slabstock foams to prevent the formation of peroxides in the polyol during storage and transport and to further protect against scorching during foaming. It also helps prevent fogging in automotive applications, and the low volatility of this product makes it a perfect fit where meat liquids, emulsions, suspensions, solutions, or melts are an integral part of polymer manufacturing and processing. This product has the convenience of a pumpable liquid that can be added before, during, or after polymerization.

Dragonox® 323 is an antioxidant with applications in rosin resins, such as penta rosin ester and glycerol rosin ester. Adding 0.2 ~ 0.3% of this product can greatly improve the color of rosin ester by 2 ~ 3 in Gardner measure, and 0.2% of this product will effectively improve the anti-crystallized character of rosin. It also functions as an effective catalyst in disproportionation and can be used as a substitute for platinum and palladium.

Dragonox® 2246 is an antioxidant that is widely used in natural rubber, synthetic rubber, latex, a variety of synthetic materials, and other petroleum products.

Dragonsorb® 360 is a dimeric 2-hydroxy benzotriazole UV absorber used in a variety of polymers and resin compositions. This product has very low volatility and high thermostability. It can be used in polyacrylic resin, polyalkene, polyamide, and elastoplastic goods with good compatibility and higher UV absorbability. This yellowish powder is insoluble in water, and soluble in esters and benzoid solvents. It shows a synergistic effect when used with other additives such as antioxidants.

Dragonsorb® 3853PP5 is a UV absorber that is mainly used for the following applications: Polyethylene (PE): Flat wire, injection molding, and roll molding products. Polypropylene (PP): Flat wire, film, injection molding products, TPO, polyolefin alloy, hips, ABS, and ASA.

Dragonox® 1425 is a high-molecular-weight phenolic antioxidant containing phosphorus. This product is a highly efficient, non-discoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats. It protects these substrates against thermo-oxidative degradation. This product is odorless, stable to light, and has excellent color retention. It has good compatibility with most substrates and high resistance to extraction.

Dragonox® 4000 functions as a stabilizer which can provide excellent thermal stability as well as color improvement. This light yellow, transparent liquid is widely used in PVC (Polyvinyl Chloride), ABS (Acrylonitrile Butadiene Styrene), SBR (Styrene Butadiene Rubber), etc.

Dragonox® 168 is a highly effective phosphite antioxidant. It acts as a secondary antioxidant and can be blended with several kinds of primary antioxidants. During processing, this product reacts with hydroperoxides formed by the autoxidation of polymers to improve the effective protection of the polymers' color.

Dragonsorb® 3035 has good compatibility with acrylic resin and can be used as a topcoat to improve the light resistance of the coating. As a UV absorber, this product is widely used in plastics, coatings, dyes, automotive glass, and cosmetics.

Dragonlite SN55 is a weak basic anion exchange resin with a polystyrene macroporous structure. It has a large pore size and specific surface area that helps absorb multiple large organic molecules. This product's normal adsorption rate can reach 80 - 95%, and the elution ratio can be more than 95%, so it is suitable for the desalination and decolorization of sugar liquors. This product can also replace activated carbon to decolorize and refine some colorful liquids like glycerin, glutamic acid, etc. Its treatment cost is lower than that of activated carbon particles. This product has excellent mechanical intensity, a high exchange capacity, and a low swelling rate. It can be applied in juices, drinks, and potable water industries. This product can also be used in the food industry to improve the color and taste of the products by the removal of salts and acid substances.

Dragonox® 1790 is a hindered phenolic antioxidant that is used for organic substrates. It is odorless, highly efficient, stable to light, and has excellent color retention. This product has low volatility, high resistance to extraction, and good compatibility with most substrates.

Dragonpovol Polyvinyl Alcohol (05-99 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-05, PVA-105, and Selvol-305, some famous bands in the market. Its main application has been in textile manufacturing. It is used as a warp-sizing agent, fabric-processing resin, and as paper surface-treating resin to elevate the bonding strength of paper.

Dragonpovol Polyvinyl Alcohol (04-88 Grade) is a typical band of the PVA family, which can generally be used as an equivalent for BP-04 and PVA-205, some famous bands in the market. Its main application has been in textile manufacturing. It is used as a warp-sizing agent, fabric-processing resin, and as paper surface-treating resin to elevate the bonding strength of paper. It can also be used in adhesives, paints, agriculture (soil conditioners), etc.

Flyadd® AY2 is a highly efficient liquid-type compounded anti-yellowing agent, which can effectively absorb 240 - 330 nm UV light. It has better resistance to yellowing when compared to the traditional benzophenone type or benzotriazole type UV Absorber. It is widely used in polyurethane foam material for shoes, insoles foam, adhesives for shoes, and other materials. This product is particularly suitable for outdoor use.

Dragonox® CA is a highly effective phenolic antioxidant that is suitable for PP, PE, PVC, polyamide, ABS resin, polystyrene, and cellulosic plastics. This low-volatile substance has high thermal stability and does not decompose during high-temperature processing. It is non-polluting, non-coloring, and can significantly change the heat and oxygen resistance of products. Additionally, this product is used in polyolefin cable products, and it has a good synergistic effect with DLTDP, dstdp, and UV absorbers. The general dosage level of this product is 0.02 - 0.5%.

Dragonlite SS7FD is a gel-type cation exchange resin that has a sulfonic group (-SO3H) in the styrene-diethylene benzene copolymer with a 7% cross-linked degree. It has excellent physical and chemical stability, a high level of purity, and minimum metal and residuals left in the pore of resins with no organics dissolved. This product has undergone a special purification process in order to meet food-grade standards.

Dragonox® 565 is a highly effective anti-oxidant used for a variety of elastomers, including polybutadiene (BR), polyisoprene (IR), emulsion styrene butadiene (SBR), nitrile rubber (NBR), carboxylated SBR latex (XSBR), and styrenic block copolymers such as SBS and SIS. This product is also used in adhesives (hot melt, solvent-based), natural and synthetic tackifier resins, EPDM, ABS, impact polystyrene, polyamides, and polyolefins.

Dragonox® 425 is a highly effective antioxidant used in synthetic resins such as ABS resin, polyethylene, and polypropylene. This product can also be used for light-colored rubber. It provides high anti-oxidation performance, thermal stability, and ultraviolet light stabilization.

Dragonox® 1010 provides long-term thermal stability to the polymer at 500 ~ 1000ppm. The optimum level has to be determined based on the specific application. Concentrations up to several percent may be used, depending on the substrate and the requirements of the end application. In polyolefins, the concentration levels range between 0.05% and 0.4% depending on the substrate, processing conditions, and long-term thermal stability requirements. In hot melt adhesives, the concentration levels range between 0.2% and 1%. In synthetic tackifier resins, the concentration ranges between 0.1% and 0.5%.