Products

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

UROTUF® L54-MPW-32 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N-methylpyrrolidone, and amines. UROTUF® L54-MPW-32 is suitable for both air-dry and force-dry applications.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

UROTUF® L53-MPW-30 is a fully reacted, color-retentive, thermoplastic, urethane dispersed in a blend of water and N-methyl pryrrolidone.

BECKOSOL® 12107-X-60 is a chain-stopped alkyd for air-dry and low-bake industrial enamels.

UROTUF® L512 is a fully reacted, aliphatic, thermoplastic, urethane resin dispersed in a blend of water, n methylpyrrolidone, and amines and is suitable for both air dry and force dry applications. It is similar to UROTUF® L51 in many properties, but gives better chemical and stain resistance when used alone or when blended with acrylic emulsions.

EPOTUF 37-685 is a patented amine functional dispersion that is used to formulate two component water-borne epoxy coatings with properties comparable to conventional solvent based two component epoxy coatings.

EPOTUF® 37-630 is an accelerated amido-amine curing agent for room temperature curing of EPOTUF® epoxy resins.

EPOTUF® 37-680 is an amine-functional emulsion which can be used to formulate two-component, waterborne epoxy systems with properties that approach conventional solvent-based two-component epoxy coatings.

BECKOSOL AQ 510 is a natural oil based alkyd/acrylic copolymer hybrid latex designed to produce coatings with good cure speed and film toughness. Primers based on BECKOSOL AQ 510 show good enamel hold-out. BECKOSOL AQ 510 requires no coalescing solvent for film formation and produces enamels that meet all AIM VOC limits in the US and Canada. BECKOSOL AQ 510 does not contain alkyl phenol ethoxylates.

UROTUF® F14-M-55 is a one-package, soya oil modified urethane alkyd, ASTM Type I, which cures by oxidation at ambient temperatures in the presence of metallic driers to produce fast dry, mar-resistant, clear or pigmented, decorative and maintenance finishes

AROPLAZ® 5293-B-75 is a water-dispersible polyester resin designed for conventional bake coatings. Selection of amino crosslinker and neutralization agent provides maximum film properties.

AROFLINT® D808-XD-71 is a high acid value polyester supplied at 71% solids in an aromatic solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

AROFLINT® 810 is an acid functional polyester resin supplied at 70% solids in a HAPS compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

EPOTUF® 38-505 is a solvent cut of EPOTUF® 37-001 at 75% solids in xylene

AROLON® 860-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on concrete, a variety of metals, and engineering grade plastics. It offers excellent mechanical stability, fast air dry and good gasoline resistance.

Thermoplastic polymer emulsion offering fast air dry and excellent water and humidity resistance.

AROFLINT® 303-X-90 is an oxirane-modified ester supplied at 90% solids in xylene. It is used in combination with high acid value polyesters such as AROFLINT® 252-Z1-60, 404-XX-60, D808-XD-71, 809, or 810 at various ratios to yield high performance coatings where excellent appearance and toughness are required.

AROFLINT® 404-XX-60 is a high acid value polyester supplied at 60% solids in an exempt solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

UROTUF® F96-MPW-32 is a waterborne oil modified urethane dispersion. UROTUF® F96 was designed for single package crosslinked coatings. Crosslinking is achieved by air oxidation at ambient temperatures in the presence of metallic driers. UROTUF® F96 performance meets, and in many cases, exceeds that of conventional solvent borne oil modified urethanes. An added benefit is formulated VOCs below 200 grams per liter.

AROLON® 847-W-42 is a styrenated acrylic emulsion designed to provide early water-spot resistance and very good corrosion resistance coupled with inhibitive pigment stability. It offers early water-spot resistance, high gloss and good chemical resistance.

UROTUF® L522-W-40 is an anionic stabilized aliphatic urethane polymer provided at 40% solids in water. The polymer in this resin is compositionally equivalent to that in UROTUF® L522-MPW-40.

FINE-CLAD® M-8025 is a hydroxyl-functional polyester. It is designed to cure by urethane cross-linkers where it imparts high hardness, good weather resistance, and excellent stain resistance.

UROTUF L63-W-38 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in water. This is the solvent free version of UROTUF L63-MPW-38.

Beckosol® 3758-M-85 (formerly Kelvar® 3758-M-85) is a phenolic-modified drying oil for use in direct production of coating vehicles without cooking. Cold blends with resins, such as phenolics, hydrocarbon resin, and oilmodified urethanes and alkyds, will produce finished exterior coating systems of high durability and chemical resistance.

UROTUF® L63-MPW-3 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in a blend of N-methyl pyrrolidinone and water.

FINE-CLAD® A-241 is a resin with both hydroxyl and glycidyl groups. It is designed to reduce pinholes and improve stain resistance in powder coatings.