Products in Power, Water & Utilities: Corrosion Inhibitor

BT DSS is disodium sebacate (based on ricinoleic acid) and applied in Lubricants , Food-grade greases and it is Approved under CFR 21.178.3570 for incidental food contact in greases.

DYTEK® DCH-99 (1,2-diamainecyclohexane) is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

Wintrol B-P is benzotriazole is its powder, acid form. This is typically a niche product which contains an anti-caking agent.

Wintrol CT is 50% sodium tolyltriazole Made in the USA. This is the most widely used form for yellow metal corrosion protection

Wintrol T-Na is the solid, sodium salt of tolyltriazole. The product is offered as a fine powder. The product is a mixture of two isomers, 4 methyl & 5 methyl benzotriazole. This product is nearly miscible in water and designed for use when solid additions are preferred.

Wintrol T-50Na is the liquid sodium salt of tolyltriazole. The product is a mixture of two isomers, 4 methyl & 5 methyl benzotriazole, sodium salt. This is the most widely used form of any triazole.

Wintrol 42 is a modified tolyltriazole compound geared towards use within the neutral pH range. This product is Made in the USA.

Prasol Chemicals ADDITIV 630 is widely used in combination as corrosion inhibitor for formulation of hydraulic oil, compressor oils, gear oils and other lubricants. It is used as anti-corrosive and anti-oxidant component in lubricant oils and greases.

Wintrol T-40DG is 40% tolyltriazole in diethylene glycol. This liquid product is easy to handle an can be used in the following applications: engine coolants, metal working fluids, lubricants, inks and cleaners.

Wintrol B-20EG is benzotriazole as acid dissolved in ethylene glycol. The product is intended for use in glycol solutions.

Wintrol T-35IP/IPW is 35% solution of tolyltriazole in isopropyl alcohol. This liquid corrosion inhibitor is easy to handle and is typically used in the following applications: metalworking fluids, cleaners, direct treatment and inks.

Wintrol B-45IP/IPW is benzotriazole as acid dissolved in isopropanol. This product has worked well in several direct metal treatment applications.

Wintrol T is tolyltriazole is its granular acid form. The product is a mixture of two isomers, 4 methyl & 5 methyl benzotriazole. Liquid forms of tolyltriazole as acid are available, this product form could work well at times formulated directly into an alkaline or hydrocarbon formula.

Wintrol B-E is benzotriazole in a crystalline, fibrous like acid form. This product does prove faster dissolution into solutions vs. the granular or flake forms.

Wintrol B-35PG/PGA is benzotriazole as acid dissolved into propylene glycol. Intended for use in PG based chillers.

Wintrol 39 is a oil-soluble modified tolyltriazole. This liquid material blends directly into common mineral oils without the need for a co-solvent.

Wintrol T-35 PG/PGA is 35% tolyltriazole is propylene glycol. This liquid corrosion inhibitor provides easy product handling and can be used in applications such as heat transfer fluids, engine coolants, lubricants and cleaners.

Wintrol B-40Na is the liquid sodium salt of benzotriazole. In contrast to the more widely used 50% Na-TTA, this 40% Na-BTA solution is used within similar formulas.

Wintrol B-F is benzotriazole is its flake, acid form. Liquid forms of benzotriazole as acid are available, this product form could work well at times formulated directly into an acid formulation at lower concentrations.

Wintrol B-G is benzotriazole is its granular, acid form. Liquid forms of benzotriazole as acid are available, this product form could work well at times formulated directly into an acid formulation at lower concentrations.