Products in Baby Diapers: Polypropylenes (PP)

Braskem CP250H polypropylene homopolymer (HPP) offers narrow MWD and low smoke and condensate. Applications and sugested users include spunbond nonwovens, high-speed fiber spinning continuous filament yarns and stable fiber.

Tasnee PP H2350 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 35.0 g/10min. Tasnee PP H2350 is a very narrow molecular weight distribution homopolymers, suitable for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for continuous filament (CF) yarns.

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

Al Sharq Flexible Packaging Factories CPP NORMAL GRADE WHITE (NEW) is a transparent, co-extruded 3-layer film and which is one side corona treated.

RG 1101 SC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, Disposable Napkins, Diaper, GeoTextiles, Filter Application

Moplen HP563T is a Fast crystallization polypropylene for spunbond

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

RG 1191 N is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

Osterman & Company Inc. Osterlene® PPH35F is used in food packaging film, heavy duty packaging, absorbtion & filtration, filament yarn, furniture & buildings, IBCs, geotextile & agriculture, hygiene nonwoven, protective clothes, wipes/tissues.Osterlene PPH35F is a very high melt flow polypropylene homopolymer resin designed for fiber spinning.Osterlene PPH35F meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

POLYPROPYLENE PP 1362R (Z21S) is obtained by polymerization of propylene in presence of complex metalorganic catalysts.It incorporates long-term thermal stability, thermal oxidative degradation resistance at PP production, processing and use of PP-made articles,resistance to fading from environmental exposure,improved melt rheology

Moplen HP553P is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process.Moplen HP553P is a homopolymer typically used by customers in high speed production of staple fiber.Moplen HP553P resin meets the FDA requirements in the CodeofRegulations in 21 CFR 177.1520 for food contact.

RG 3200 MC is a Polypropylene Random Copolymer Without Film Processing Additives and Good Weld Strength. It is used in Stationary Films, Hygienic Applications, Food Packaging, Laminating Films

TATREN HT 25 11 is a controlled rheology homopolymer of very narrow molecular weight distribution. Consistent processability, good color and thermal stability, very low volatiles and low smoke make this grade suitable to be used for very demanding fiber applications. This grade contains anti gas fading additive package.

Al Sharq Flexible Packaging Factories CPP METALLIZABLE GRADE 20 is a transparent, co-extruded 3-layer film and which is one side corona treated.

Moplen HP561R is a Polypropylene homopolymer resin for spunbond fibers

Al Sharq Flexible Packaging Factories CPP NORMAL GRADE is a transparent, co-extruded 3-layer film and which is one side corona treated.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Al Sharq Flexible Packaging Factories CPP LAMINATION GRADE is a transparent, co-extruded 3-layer film and which is one side corona treated.

Moplen HP461X is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

RG 1101 R is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Random copolymer polypropylene; lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber. Recommended for: Non woven soft touch fabrics Spunbond process; melt spinning of low denier fibers where it is necessary this properties; extrusion coating of raffia woven fabrics; injection molding general purpose applications.

Moplen HP461Y is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

Moplen HP562T is a Polypropylene homopolymer resin for spunbond fiber

RG 1101 RC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, BCF/CF, POY Yarns, Injection Molding of Articles

RG 1101 XS is a Polypropylene Homopolymer With antiGasfading Stabilization and Inherent UV Stability. It is used in POY/DTY, CF, Laminating

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Moplen HP563S is the controlled rheology polypropylene homopolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Moplen HP563S is a homopolymer typically used in spunbonded nonwovens. Moplen HP563S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Moplen HP561X is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

Moplen HP552R is the polypropylene homopolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Moplen HP552R is a homopolymer typically used by customers in high speed production of staple fiber. Moplen HP552R resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

RG 1101 XR is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

RG 1191 XN is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)