Products in Base Chemicals & Intermediates: Polyurethane Foams

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

Bismuth neodecanoate is vital Materials supplies all manner of bismuth metal-based products ranging from bismuth ingots, needles, and shot in bulk, to all varieties of bismuth oxide which differ in particle size, shape, and other special properties. Vital Materials is also a supplier of bismuth compounds like bismuth sub-nitrate for catalyst production, bismuth citrate for dishwasher tablets, and also pharmaceutical compounds like bismuth subsalicylate and bismuth subgallate for the digestive system.

AFEX™ CN30C is a base drying oil called as Canola having no double bond.

CA - 5010 U is Applied In PU Foam, Intergral Skin, TPU.

Rokopol® iCan 4100 is a specialized, base polyether polyol dedicated to production of winter, assembly one-component foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 150-165 mgKOH/g, and dynamic viscosity within the range of 200-350 mPas at temp. 25°C.

CA - 5020 U is Applied In PU Foam, Intergral Skin, TPU.

CA - 2410 U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

PETOL® 160-3 is a propoxylated glycerol, polyether polyol triol with an average molecular weight of 1000.

Sehotech SP-240P is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

WJESPOL 1200 is adhesive for EPS Panel

AFEX™ CN23C is a base drying oil called as Canola having no double bond.

EXAPOL SU 465 is a medium viscosity and moderate functionality sucrose – glycerin based polyether polyol. This is a general purpose polyol

Sehotech SP-200 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

AFEX™ TG30C is a base drying Oil called as Tung having three conjugated double bonds.

Rokopol® M6000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 27-29 mgKOH/g, and its dynamic viscosity is within the range of 1050-1250 mPas at temp. 25°C.

AFEX™ LN23C is a base drying Oil called as Linseed having two conjugated double bonds.

EXAFLEX 3548 is a propylene oxide and ethylene oxide based trifunctional polyol. It is made to be used to produce flexible PU slabstock foam on continuous line as well as on batch block. It is designed to provide a better bounce and processibility compared to 3000 MW polyols.

Cornerstone Chemical Company Melamine also acts as a formaldehyde scavenger in plywood, medium-density fiberboard (MDF) and particle board. Melamine is used to make a product that gives materials flame-retardant properties.

EXAFLEX 6028 is a propylene oxide and ethylene oxide based trifunctional polyol. The calibrated amount of ethylene oxide with high primary end groups gives extra reactivity with isocynates allowing it to be used for one shot HR molded foam using high pressure as well as low pressure machines. The HR molded foam using EXAFLEX 6028 are characterized by high resiliency and good surface properties and good elasticity.

itaforte Hydrated Aluminas is used for special applications. Aluminum hydroxide is obtained from the purification of bauxite from the Bayer process.

EXAPOL SU 440 N/1 is sucrose – glycerine based polyether polyol of moderate functionality and low viscosity.

WJESPOL 2100 use has low viscosity, high flowability and miscibility

CA - 4020U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Exapol Sor 445 N is sorbitol based polyether polyol of high functionality but medium viscosity. It is also shows better cyclopentane solubility.

Hydrochloric Acid 32% Solution is a clear, colorless, fuming liquid with pungent odor. It is the aqueous solution of hydrogen chloride gas, and a strong and highly corrosive acid. It is soluble in water, alcohol, and benzene. This product is industrial grade material, and designed for use in industrial applications.

BioPolyol TT is a bio based polyol mainly for rigid polyurethane foam production. For rigid foam production this polyol is used in mixture with cross-linking polyols whose functionality is at least five. Our suggested ratio between Bio Polyol TT and cross-linking polyol is approx. 80:20 by mass. Polyol is synthesized from tall oil. It contains primary hydroxyl functional groups and tertiary amine groups. This polyol is catalytically more active and can be used for spraying PUR formulations. Polyol is difunctional and Natural Oil Based with estimated bio carbon content ~ 70 %.

PETOL® 400-3 is a propoxylated glycerol, low viscosity polyether polyol triol with an average molecular weight of 440.

BioPolyol TD is a bio based polyol, mainly for rigid PU foam production. For rigid foam production this polyol is used in mixture with cross-linking polyols whose functionality is at least five. Our suggested ratio between Bio Polyol TD and cross-linking polyol is approx. 80:20 by mass. Polyol is synthesized from tall oil. It contains only primary hydroxyl functional groups. Polyol is difunctional and Natural Oil Based with estimated bio carbon content ~ 80 %.