Products in Fluids & Lubricants: Dispersant

STEPAN® MWA-261 is a nonionic surfactant designed for low-foaming and defoaming applications. It can also be used functionally as a dispersant and wetting agent and is soluble in ethanol, isopropanol, methanol, toluene, xylene, and perchloroethylene solvents. It can be used as an emulsifier and lubricant in synthetic and semi-synthetic metalworking fluids and as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

MAKON® 17R4 stands as a nonionic reverse eo/po block copolymer that exhibits fast-breaking, low foaming, defoaming properties, and strong detergency. Its applicability spans numerous markets, from industrial and institutional to pulp and paper and textiles. It can be utilized in metalworking fluids, dispersants, industrial lubricants, agricultural pesticide formulations, and low foaming detergents. Like other products in the makon® line, it is a low ash product.

T-Mulz® A 263 PE is a versatile surfactant known for its excellent wetting and lubricating properties. It exhibits high detergency and offers corrosion resistance, making it ideal for industrial applications in the oil, gas, and mining sectors, particularly in exploration and upstream processes.

T-Mulz® ADP is an additive used to improve the adhesion of paint film on non-ferrous substrates such as aluminum, zinc, copper, brass, and electroplated steel. It is typically used in stoving paints and promotes adhesion of stoving paints on difficult non-ferrous substrates. Additionally, it improves the paint films flexibility and impact resistance.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

T-Mulz® HP is the phosphate ester of 2-hydroxyethyl methacrylate. It is a reactive monomer that copolymerizes with a wide variety of monomer systems. This product is inhibited with 400 ppm of hydroquinone. It is used to improve latex stability, promote polymer adhesion to various metal substrates, improve film tensile strength, impart antistatic properties to polymers, and improve corrosion resistance.

T-Mulz® 565 is a blended anionic surfactant that is designed primarily for use in emulsifier systems for agricultural and industrial formulations. The chemical properties of this product are similar to T-Mulz® 598, except that it is more hydrophilic. It is compatible with both anionic and nonionic surfactants.

T-Mulz® 844 is a phosphate ester designed for use in alkaline cleaners, textiles in yarn lubricants, and wet processing. This product is used in concentrated electrolyte solutions to improve salt tolerance and as a hydrotrope that provides detergency, wetting, and coupling properties.

T-Mulz® WAM is a blend of surfactants designed to increase the penetration of water and other nutrients into hard-to-wet soils. It eliminates localized dry spots and can increase plant growth in all types of media. The usage rates depend on local water hardness and are generally 3 - 4 ounces per gallon of water.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

T-Mulz® BP-PE is the phosphate ester of a block polymer. It is a low-foaming surfactant that has a cloud point slightly above room temperature. This phosphate ester surfactant can be used in formulations for the metal cleaning and metalworking industries.

T-Mulz® 734-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural and industrial formulations. This product is an excellent emulsifier for a wide range of solvents. It is particularly good as a solvent emulsifier when hard water is the main problem.

T-Mulz® P-4LF is a phosphate ester designed for use in alkaline cleaners and hard surface detergents. This product is excellent for metal cleaner formulations due to its low foaming characteristic. This clear, yellow, viscous liquid has a surface tension (0.05% aqueous) of 70 dynes/cm.

T-Mulz® 810 is an alcohol-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions to improve salt tolerance. This product is also used as a hydrotrope that provides detergency, wetting, and coupling. It is compatible with both anionic and nonionic surfactants.

T-Mulz® A 181-4.5 PE is a complex organic phosphate ester that is compatible with anionic and nonionic surfactants. It is highly effective as a lubricant, wetting agent, corrosion inhibitor, dispersant or emulsifier and is often used in lubrication oils, polishing fluids and cutting fluids.

T-Mulz® 596 is a complex, ester-free organic phosphate acid that is recommended for use in areas of emulsion polymerization. This product is compatible with anionic and nonionic surfactants but should not be mixed with concentrated oxidizing or reducing agents, as the mixture of these compounds with organic compounds forms a potentially explosive mixture.

T-Mulz® ESHF is the ammonium ether sulfate of a mid-range carbon chain ethoxylate. It is the higher-flash-point version of Foamer ESLF. It has an equally fast wetting time and is supplied as a 58% active product. The active ingredient is supplied in a water/propylene glycol solvent system.

T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.

T-Mulz® A 136 PE is an APE-free anionic surfactant that is primarily used for acrylic, styrene/acrylic, and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant or as a post-additional surfactant to improve gloss retention. This product also provides particle size control, corrosion inhibition, and improved adhesion.

T-Det® XD is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent. It is useful in a variety of industrial applications, such as pigment, paper coating, and polymer dispersant. Additionally, it is a good emulsifying agent for aromatic compounds and similar solvents, making it suitable for agricultural, insecticide, and pesticide formulations, as well as latex resin polymerization and metalworking fluids.

T-Mulz® 786-1 is a phosphate ester that is designed primarily for making emulsifier systems for metal processing, solvent cleaners, and dry cleaning. This non-hazardous surfactant has good dispersion properties and good solubility. It is soluble in perchloroethylene, xylene, ethanol, and kerosene and is readily dispersible in water.

T-Mulz® 565-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural, latex, and industrial formulations. It provides coupling ability, emulsification power, and rapid wetting to the formulation. As supplied, it is a free acid and will react readily with basic compounds.

T-Mulz® A 139 PE is an APE free anionic surfactant primarily used for acrylic, stirene/acrylic and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant, or post-added to improve gloss retention, provide particle size control, corrosion inhibition and improved adhesion.

Armolube® FM 501BL friction modifier acts as an excellent ashless friction modifier across all friction regimes – useful for either lubricant or fuel formulations with very good wear reduction/lubricity benefits and as a good oil-soluble co-emulsifier.

DePHOS 8028FA is an aliphatic phosphate ester in its acid form, derived from an ethoxylated alcohol.

IONET MO-600 has excellent dispersibility and emulsifiability, and low toxicity, suitable for a wide variety of uses in cosmetic applications.

NEWPOL PE-64 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-108 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET MS-400 has excellent dispersibility and emulsifiability, and low toxicity, suitable for a wide variety of uses in cosmetic applications.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-20C is used for fluidic cosmetics.

IONET DS-4000 is general-purpose pigment dispersants.

NEWPOL PE-75 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET MS-1000 has excellent dispersibility and emulsifiability, and low toxicity, suitable for a wide variety of uses in cosmetic applications.

IONET DO-1000 is polyethylene glycol fatty acid ester types of nonionic surfactants. IONET DO-1000 is fatty acid diesters of polyethylene glycol.They are used as emulsifiers, dispersants, leveling agents, and other agents in a wide range of fields such as the metal, cosmetic, pulp and paper, and textile industries

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-85 is used for fluidic cosmetics.

IONET MO-400 has excellent dispersibility and emulsifiability, and low toxicity, suitable for a wide variety of uses in cosmetic applications.