Products in Water Treatment Chemicals

BTC® 85-RT is a quaternary for formulation into a wide variety of institutional and industrial cleaning applications, including water treatment, gas and oil drilling muds and packer fluids, gas and oil recovery injection water systems, gas and oil fracturing fluid systems, and wood preservation. This biocidal active is associated with a u.S. Epa-registered end-use formulation that meets the criteria for applications against emerging viral pathogens. End-use formulations meeting this criteria may be considered for use as hard surface disinfectants against sars-cov-2, the novel coronavirus that causes the disease covid-19.

STEPANQUAT® 200 is a quaternary used for odor control in water reclamation. Stepanquat 200 is miscible with soft and hard water (400 ppm caco3) in all proportions, as well as with alcohol and acetone in all proportions. Stepanquat 200 is insoluble in ether, benzene, petroleum, and/or chloroform. Stepanquat 200, at the recommended use level, does not contribute to the corrosion of metal compounds.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 822 E is a medium-viscous, highly effective silicone antifoam emulsion developed specifically for use in pulp mills. It is characterized by its very good knock-down efficiency, long-term efficiency, compatibility, and excellent stability. PULPSIL® 822 E acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

PULPSIL® 745 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is characterized by its low viscosity, making it easy to dose, as well as its excellent long-term efficiency and very good knock-down efficiency. PULPSIL® 745 E functions primarily as an antifoam agent and drainage aid, and it can be added at different stages of the manufacturing process.

PULPSIL® 823 E is a medium-viscous, highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 823 E is mainly used in pulp washing and screening processes, as well as bleaching and wastewater treatment. It offers very good knock-down efficiency and long-term efficiency.

PULPSIL® 246 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically developed for use in pulp mills. It has excellent long-term efficiency and very good knock-down efficiency. The product is thixotropic, requiring weak stirring to reduce its viscosity. It also offers good handling during application. PULPSIL® 246 C is resistant to alkaline conditions and is designed to effectively control foam in pulp mill operations.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 266 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It offers very good handling, long-term efficiency, and excellent knock-down efficiency. This product is also suitable for applications in antifoams for textile finishing and pulp-related processes.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

TEGO® Antifoam KE 600 EC is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

TEGO® Antifoam KS 53 is a self-emulsifying organic antifoam concentrate, free of APEOs, and based on food-grade vegetable oil It includes minor quantities of organo-modified siloxanes to enhance its efficiency. It functions as an anti-foaming agent and is well-suited for processes such as polymerization and suspension polymerization.

TEGO® Antifoam KE 600 is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

TMT 15® is an environmentally friendly solution used to separate and remove heavy metals from wastewater generated in numerous industrial applications. It enables compliance with strict environmental regulations and offers high effectiveness in various applications. TMT 15® is non-toxic, non-hazardous, has good ecological properties, and can be handled safely without unpleasant odors. It benefits from experienced application and technical competence.

DYNOCEL® 600 is a 14 x 28 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOL® 607 is a high-performance, non-ionic superwetter capable of delivering the exceptional equilibrium and dynamic surface tension reduction synonymous with the Dynol name. It also boasts improved ease-of-incorporation and formulation compatibility compared to the more hydrophobic DYNOL® 607 Surfactant. Furthermore, comparative wetting performance tests have confirmed that DYNOL® 607 Surfactant is a valuable replacement for conventional fluorosurfactants and offers a cost-effective, non-persistent alternative to emerging fluorosurfactant technology.

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

DYNOCEL® 900 is a 20 x 50 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOCEL® 900 is a 28 x 48 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

WWT 70 is a medium-charge, high-molecular-weight, cationic polyacrylamide in dry form. This product is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 4816 is a high-charge, very high-molecular-weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

Harcros Glutaraldehyde, belonging to the aldehydes family, serves multiple functions as a biocide and dechlorination agent. It is primarily used in industrial water treatment and wastewater treatment processes, as well as in various water treatment applications within the power, water, and utilities sectors.

WWT 107 is a cationic polyacrylamide in emulsion form with a medium molecular weight. This product is commonly used as a flocculant in various municipal and industrial wastewater treatment applications. WWT 107 has proven to be effective in liquid/solids separation systems, such as clarification and dewatering.

WWT 325 is a highly effective cationic melamine formaldehyde polymer with a low molecular weight. It has proven to be successful in liquid/solids separation systems such as clarification and dewatering. This clear light blue liquid is designed to prevent scale formation in cooling water systems. Formulated to inhibit the precipitation of calcium carbonate, calcium phosphate, and other minerals, it prevents the buildup of scaling and fouling, which can cause corrosion and inefficiencies. WWT 325 is a cost-effective and environmentally friendly solution that enhances the efficiency and longevity of cooling water systems in various industrial applications. Trust WWT 325 to provide reliable protection for your cooling water systems.

PWT 5038 is a liquid emulsion industrial additive, specifically designed as a flocculant for water treatment in power, water, and utilities applications.

H-PAC® 3013 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

Harcros Calcium Nitrate is an industrial additive and odor control agent. It is used in ponds and lagoons for water treatment in various industrial applications within the power, water, and utilities market.

H-PAC® 3014 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

Harcros Ammonium Sulfate 40% is an inorganic solution used in chemical manufacturing. It belongs to the ammonium salts and inorganic acids chemical families. The chemical name is ammonium sulfate, and it is commonly used as a processing aid in industrial applications, providing functionality in formulation and chemical processes.

Aquacros® HC-3870 is a high performance dry blended phosphate product designed to sequester iron and manganese as well as hardness salts while also providing corrosion control. It reduces build up of scale in the distribution system, reduces the need for replacing existing piping and associated equipment attributed to excessive deposition or under-deposit corrosion, and assists municipalities in meeting the Lead and Copper Rule. It is a white powder.

H-PAC® 4016 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.