Products results

USI Chemical USi-OH 750 is useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations.

USI Chemical USi-OH 70 is useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations.

USI Chemical USi-OH 20000 is useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations.

Casastab™ T is a thickening agent for latex compounds. It is recommended particularly where a moderate increase in viscosity is required, for example in dipping compounds and adhesives.

AL FS-300 hydrophilic fumed silica with its smaller primary particle size makes it more suitable for transparent and semi-transparent systems. Fumed silica’s unique manufacturing process produces a very high purity type of silica with nano size primary particles, a fluffy white powder that is an amorphous and form of silica. These characteristics impart a wide range of benefits to formulations from thickening and reinforcement to free flow and anti-settling.

USI Chemical USi-OH 80000 is useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations.

Santicizer® 375 is a viscosity modifier for use in PVC plastisols or organosols. This product is fugitive during any open heating processing, so it will be predominately absent in the finished good. The material can help compensate for viscosity rise that is a common shelf life problem for plastisols using fast fusing plasticizers. Additionally, Santicizer® 375 can allow for case hardening in applications that require surface rigidity.

USI Chemical USi-OH 2000 is useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations.

Pharmaceutical grade Ammonium Acetate is used in the manufacture of insulin and penicillin as well as in chromatography. Technical grade Ammonium Acetate is used in the dyeing and printing of textiles, in surface treatment of metals and as a catalyst in rayon fiber productions. Ammonium Acetate is available as fine white crystals, or as a 50% or 57.5% solution in water.

Pepton® 66 is a dust free, pellet form chemical peptiser which provides handling and environmental improvements over conventional powder form peptisers.

USI Chemical USi-OH 1500 is useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations.

RP 06 - RP 06 Odor modifiedRP 11 General purposeRP 23 When PE is presentRP 38 High efficiency when PE is presentVMO Series Low Odor

Ve Chemical N660 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

ADD-PA 401-H is flow aids copolymers containing functional groups or organic and inorganic raw materials, which are partly made with nanomaterials and modifiers in the complex. Wherein various types also represent high molecular flow aids. These additives improve next to the gel time also the surface gloss and increase the viscosity of the PVC melt.v

GRAFTALEN™ EB-PER 15010 is an ethylene-butyl acrylate based additive for polypropylene, designed to increase melt flow of polypropylene and polypropylene compounds. This grade has 10% of the active peroxide component.

ADD-PA 2401 is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

KURARAY POVAL™ 25-100 by Kuraray is fully hydrolyzed polyvinyl alcohol (PVOH) grade. It is used as an adhesive promoter. It provides good cohesion and adhesion to fibers, fillers and pigments. It exhibits good bonding strength and pigment binding capacity. It is suitable for modification of emulsion- and remoistenable adhesives in the paper processing industry. Aqueous solution of KURARAY POVAL™ 25-100 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is designed for use in postage stamps and labels.

KURARAY POVAL™ 44-88 S2 by Kuraray is a fine powder polyvinyl alcohol (PVOH) grade. It is used as an adhesive promoter. It is suitable for modification of emulsion and remoistenable adhesives in the paper processing industry. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. Aqueous solution of KURARAY POVAL™ 44-88 S2 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is used in postage stamps and labels. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.

WARADUR® GE is a glycerol ester wax of montanic acids and exhibits a slightly higher molecular weight than WARADUR® E. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding glycerol esters exhibit chain length in the range of approx. C60 avg. and provide this wax with a low volatility, good thermostability and low migration rates.

ADD-PA 2020A is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

PlastCure BDB 20 is a strong free radical source used to cross-link polyethylene and modify MFI of polypropylene.

ADD-PA 340 is flow aids copolymers which are produced with an ACR monomers with latex. These flow aids represent high molecular weight products, which are mounted on a multilayer structure.

ADD-PA m 2401 is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

Purgex™ 459 Plus commercial purging compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex 459 is an ideal purging compound for tough resins.

KURARAY POVAL™ 23-88 EE by Kuraray is partially hydrolyzed polyvinyl alcohol (PVOH) grade. It exhibits good bonding strength and pigment binding capacity. It provides good cohesion and adhesion to fibers, fillers and pigments. It is suitable for modification of emulsion and remoistenable adhesives in the paper processing industry. It is used as an adhesive promoter. Aqueous solution of KURARAY POVAL™ 23-88 EE can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is recommended for use in postage stamps and labels.

Sunlube CA-10 is in fine powder form and it is chemically known as Calcium Stearate.

ADD-PA 401-F is flow aids copolymers containing functional groups or organic and inorganic raw materials, which are partly made with nanomaterials and modifiers in the complex. Wherein various types also represent high molecular flow aids. These additives improve next to the gel time also the surface gloss and increase the viscosity of the PVC melt.v

ChemPlasa Materials L-101G is Ethylene Bis Oleamide which used as a functional additive in plastics manufacturing.

ADD-PA 800 is copolymers which are produced with an ACR monomers with latex. These flow aids represent high molecular weight products, which are mounted on a multilayer structure.

ULTRA-FLOW™ 440 is a processing additive for application in natural and synthetic rubber. Due to its unique composition it provides excellent improvement of processing properties for a broad range of elastomers of high and low polarity. ULTRA-FLOW™ 440 improves filler dispersion, in particular silica and other mineral fillers. ULTRA-FLOW™ 440 shows outstanding performance in extruded compounds, but also works well for transfer and injection molding. ULTRA-FLOW™ 440 complies with FDA 177.2600 and BfR XXI.

ULTRA-FLOW™ 800 is a zinc free dispersing aid for both carbon black and white fillers. It is particularly applied where zinc soaps are restricted. In the presence of silane coupling agents, ULTRA-FLOW™ 800 should be added after the silanization process is completed.

ADD-PA 175 is a flow aid with acrylatischer Eigengleitwirkung. is flow aids used, where one wants to reduce adhesion and adhesion tendency of the melt. Therefore, they are often found in the films and foam industry. Other applications include the bottles, plates, profiles and pipes, industrial.

ADD-PA 321 is flow aids copolymers which are produced with an ACR monomers with latex. These flow aids represent high molecular weight products, which are mounted on a multilayer structure.

PlastCure 40 PE is a strong free radical source used to cross-link polyethylene and modify MFI of polypropylene.

SD Korea SVD-604 viscosity stabilizer is for stabilizing and controlling the viscosity of paste PVC sol.

Fine-Blend EMI-230B is styrene-acrylonitrile binary random low molecular weight copolymer, and it has colorless bead appearance.