Products

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

3B Fiberglass W 2020 are spe-cifically designed to provide signifi-cantly higher modulus, strength and enhanced fatigue performances ver-sus traditional E-glass for wind turbine blades made out of epoxy resin. HiPer-texTM W 2020 Rovings are per-fectly suited for the production of high modulus Non Crimped Glass Fabrics and prepregs. The sizing W 2020 is purposely formulated for excellent adhesion with epoxy resin systems and leads to superior interfibre and interlaminar shear strengths as well as dynamic performances. The specific boron free glass formula-tion provides superior hydrolysis and corrosion resistance. These properties improvements versus typical E-glass will help blade desi-gners to push further the limits of glass fiber blade designs, especially for the long blades required for the multi MW turbines for on shore and off shore. The W 2020 roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades.

3B Fiberglass SE 3030 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 3030 Direct Rovings made of Advantex® glass are specifically desi-gned for multipurpose applications/processes such as the production of Non Crimped Fabrics, prepreg, filament winding, pultrusion, etc. The sizing of SE 3030 Direct Rovings is compatible with multiple resins: i.e. polyester, vinylester and epoxies. SE 3030 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths.

3B Fiberglass SE 2020 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 2020 Direct Rovings made of Advantex® glass are specifically designed for the production of Non Crimped Fabrics. The sizing of SE 2020 Direct Rovings is specifically designed for excellent adhesion with epoxy resin systems. SE 2020 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths. The SE 2020 Roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades. SE 2020 Direct Rovings made of Advantex® glass can also be used in prepreg, filament winding processes.

3B Fiberglass W 3030 are specifically designed to provide significantly higher modulus, strength and enhanced fatigue performances versus traditional E-glass for wind tur-bine blades made out of unsaturated polyester, vinylester or Epoxy resin. HiPer-texTM W 3030 Rovings are per-fectly suited for the production of high modulus Non Crimped Glass Fabrics. The sizing W 3030 is purposely for-mulated for excellent adhesion with polyester, vinylester and Epoxy resin systems and leads to superior interfibre and interlaminar shear strengths as well as dynamic performances. The specific boron free glass formula-tion provides superior hydrolysis and corrosion resistance. These properties improvements versus typical E-glass will help blade desi-gners to push further the limits of glass fiber blade designs, especially for the long blades required for the multi MW turbines for on shore and off shore.