Products

Accoquat® CS-4000 is a unique blend of cationic emulsifiers in a blended solvent system especially designed for micro-emulsification of formulations of mineral seal oils (MSO) or other organic hydrophobes. It micro-emulsifies MSO effectively with ethylene glycol mono butyl ether as its coupling agent. Accoquat® CS-4000 can produce micro-emulsions with MSO from 10-30% MSO concentration, (depending on the properties of the MSO), however is most cost effective from 15-30% MSO concentrations. Accoquat® CS-4000 generally does not require additional emulsifiers or other nonionic surfactants to produce an easily dispersible and fine micro-emulsion for rapid beading and spreading. With substantially less emulsifier it is very cost effective for ultra-type drying aids. Upon dilution in water, its unique blend of chemistries provides a consistently-functioning, high-performance, very fine micro-emulsion with MSOs. It is manufactured in USA.

Accoquat® CS-5000 is a blend of cationic emulsifiers designed to produce micro-emulsions when combined with mineral seal oil (MSO). These micro-emulsions are most often used as the basis for car rinse-aids and other post-wash treatments in commercial and home applications. It is manufactured in USA.

Accoquat® CS-3000 functions as a solvent with multiple uses. It is easy to handle and may be used for water repellency, emulsification of oils, and hydrophobic materials, as an anti-static agent, fabric and textile softener, paper de-bonder, automatic car wash rinse aid and vehicle drying aid. It is manufactured in USA.

Accoquat® 522HF-90, a ditallowamidoethyl (hydroxyethyl) ammonium methosulfate, has a high flash point above 100°C in diethylene glycol (DEG). Accoquat 522HF-90 is dispersible in hot water (>50°C). It provides excellent softening while imparting anti-static properties to fabrics. Accoquat 522HF-90 is non-yellowing to fabric at high drying temperatures even after repeated washings. It is an economical product with low odor, excellent for I&I and consumer softeners. It is manufactured in USA.

Acconon® CCG is a mono-diglyceride of medium chain fatty acids (mainly caprylic and capric). It is an excellent solubilizer and multifunctional co-emulsifier for both o/w and w/o systems. It is manufactured in USA.

Accoquat® 875-90 is a rinse cycle fabric softener concentrate available at 90% solids in IPA. It is an off-white paste at room temperature and is pumpable between 25-30°C. It is manufactured in USA.

Accoquat® 875-80 is a rinse cycle fabric softener concentrate available at 80% solids in IPA. It is an off-white translucent, viscous liquid at room temperature and is pumpable above approximately 20°C. It is manufactured in USA.

Accoquat® 622HF-90 is a diamidoethyl (hydroxyethyl) ammonium methosulfate quaternary in a propylene glycol solvent. It has low volatile organic carbons and is produced from natural/vegetable-based soybean oil sources, thus making it ideal for use in consumer and I&I green-renewable formulations. It is used in finishing and drying process of textiles because it reduces the effects of exposure of ozone from the atmosphere. Accoquat 622HF-90 is dispersible in warm water (>35°C), and with its easy-to-handle high solids, low odor and no solvent smell it provides excellent softening while imparting anti-static properties to fabrics. It gives a low degree of yellowing to fabric even at higher drying temperatures. Accoquat 622HF-90 is notably good in its re-wet properties for fabrics compared to most other fabric softener concentrates, dramatically reducing the tendencies for “waterproofing” fabrics at higher softener dosage levels, a common problem with many other softeners currently in the market. It is manufactured in USA.

Accoquat® 522LM-90, a ditallowamidoethyl (hydroxyethyl) ammonium methosulfate, is an economical, easy to formulate, low-temperature melting, off-white paste at 90% in isopropyl alcohol. Accoquat® 522LM-90 is dispersible in cool water. It provides excellent softening while imparting anti-static properties to fabrics. Accoquat® 522LM-90 is non-yellowing to fabric at high drying temperatures even after repeated washings. It is manufactured in USA.

Accoquat® 622-90 is a diamidoethyl (hydroxyethyl) ammonium methosulfate quaternary in an isopropyl alcohol (IPA) solvent. It has low volatile organic carbons and is produced from natural/vegetable-based soybean oil sources, thus making it ideal for use in consumer and I&I green-renewable formulations. It is used in finishing and drying process of textiles because it reduces the effects of exposure of ozone from the atmosphere. Accoquat 622-90 is dispersible in warm water (>35°C), and with its easy-to-handle high solids, low odor and no solvent smell it provides excellent softening while imparting anti-static properties to fabrics. It gives a low degree of yellowing to fabric even at higher drying temperatures. Accoquat 622-90 is notably good in its re-wet properties for fabrics compared to most other fabric softener concentrates, dramatically reducing the tendencies for “waterproofing” fabrics at higher softener dosage levels, a common problem with many other softeners/debonders currently in the market. It is manufactured in USA.

Accoquat® 522LM-75, a ditallowamidoethyl (hydroxyethyl) ammonium methosulfate, is an economical, easy to formulate, low-temperature melting, off-white paste at 75% in isopropyl alcohol. Accoquat 522LM-75 is dispersible in cool water. It provides excellent softening while imparting anti-static properties to fabrics. Accoquat 522LM-75 is non-yellowing to fabric at high drying temperatures even after repeated washings. It is manufactured in USA.

Accoquat® CS ULTRA NF is a unique nonflammable proprietary blend of cationic and nonionic emulsifiers and is especially designed for micro-emulsification of mineral seal oils (MSO) or other organic hydrophobes. Accoquat® CS Ultra NF can be used with both low and high boiling range mineral seal oils. It micro-emulsifies MSO effectively with ethylene glycol mono butyl ether (Butyl Cellusolve EB) as its coupling agent. Accoquat® CS ULTRA NF can produce micro-emulsions with MSO where the MSO concentration varies from 10-30%. Accoquat® CS ULTRA NF generally does not require additional emulsifiers or other nonionic surfactants to produce an easily dispersible, fine microemulsion. Upon dilution in water, its unique chemistry provides an infinitely dilutable, high-performance microemulsion with MSOs. It is manufactured in USA.

Accoquat® CS-3000 NF is cationic emulsifier that can be used to create micro-emulsions with organic hydrophobic materials such as mineral seal oil. Accoquat® CS 3000 NF is based on a proprietary nonflammable point solvent system that overcomes some of the challenges created by high flash emulsifiers that are based on propylene glycol. The product is designed to offer flexibility when it comes to choosing a nonionic co-emulsifier for car wash rinse aids and other car care products. It is manufactured in USA.

Accoquat® EZ-Dry 8000 HF is an extension of our proprietary Accoquat CS Ultra HF technology designed for ease of use. This car drying aid only requires the addition of water to make a full range of car drying aid products (dilution range of 1:1200 to 1:150) providing an easy way to formulate a wide range of drying aids without the need for other raw materials. It covers all ranges of formulation concentrations while minimizing formulation stability concerns. It is manufactured in USA.