Products

MicroKleen™ PLC-40 - Siloxane Stripper effectively dissolves cured MicroGuard® Clear Siloxane films, one layer at a time. For stripping multiple siloxane coating layers, directional steps 3 through 6 will need to be repeated for each coating layer to be removed.

MicroKleen™ PLC-AN - Phosphoric Acid Etch & Clean is designed for neutralizing the high pH of porous lime grout and concrete surfaces prior to the application of MicroGuard® Clear Siloxane Finishes. In addition to etching and neutralizing these surfaces, this product will also clean and remove concrete surface laitance or efflorescence and light, oily contamination. PLC-AN may also be used to remove cuprous oxide or copper sulfate from copper and tarnish from non-ferrous or stainless metals.

MicroKleen™ AD1-919 - Spray and Equipment Cleaner is used to clean and/or flush application tools and spray equipment, following the application of Adsil Clear Inorganic Reacted Siloxane Protective Treatments. MicroKleen™ AD1-919 can also be used to clean up drips, spills and over spray before the Adsil Clear Reacted Siloxane products dry to touch.

MicroKleen™ AD72-930 - Final Rinse is used to affect a final cleaning, rinse and pH neutralizing of HVAC/R aluminum or copper coils and fin-packs before the installation of MicroGuard® AD35 Clear Coil Protective Treatment. Final Rinse will also help remove any remaining soap film residue or other surface contaminates lingering on the surface from the initial cleaning process.