Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- PRODUCT BENEFITS
- Temperature range: -320°F to +500°F
- Exceptional dielectric insulation properties
- Negligible moisture absorption
- Low coefficient of friction
- Non-stick surface
- Very low gas permeation and outgassing
- May be welded with hot air welding equipment
- Chemically inert to all industrial chemicals and solvents
- High resistance to outdoor weathering
- Does not support combustion
- Low metals and ion extractables
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- TYPICAL APPLICATIONS
- Pump housings and pipe linings
- Fluid handling or chemical processing equipment
- Wet bench equipment
- Tanks
- Semiconductor wafer carriers
- Hostile environments involving chemical, thermal, and mechanical stress
- Food processing and packing equipment
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate | 1.5-2.5 | g/10 min | D3307 |
| Durometer Hardness | 60 | Shore D | ASTM D 2240 |
| Specific Gravity | 2.14-2.16 | g/cm3 | D3307 |
| Water Absorption (24) | max. 0.01 | % | D570 |
| Tensile Strength (23°) | 4350 | psi | D3307 |
| Elongation (23°) | 300 | % | D3307 |
| Compressive Strength (25°) | 725-870 | psi | D695 |
| Impact Strength (23°C, Notched Izod) | No Break | J/m | D256 |
| Flexural Modulus (23°) | 84,000-100,000 | psi | D790 |
| Coefficient of Friction | 0.04-0.05 | — | D621 |
| Deformation Under Load (25°C, 1987) | 8-9 | % | D3307 |
| Value | Units | Test Method / Conditions | |
| Melting Point, Nominal | 300-310 | °C | D696 |
| Thermal Expansion (21°C to 100°C) | 12 x 10^-5 | mm/mm/°C | D2863 |
| Oxygen Index | min.95 | % | UL 94 |
| Maximum Service Temperature | 260 | °C | D257 |
| Flammability | V-0 | — | D149 |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 10^18 | ohm-sq | D150 |
| Dielectric Strength Short Time (.125in) | 500-600 | Volts/mil | D150 |
| Dielectric Constant (23°C, 10^6) | 2.1 | — | — |
| Dissipation Factor (23°C, 10^6) | 0.003 | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- COMPLIANCES
- ASTM D 3307 Type II
- 3A Sanitary Standard 20-17
- USP Class VI
- USDA and FDA compliant CFR-177.1550