Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Outstanding Features
• Available in a wide range of standard and custom colors
• Carries the highest U.L. rating for fire protection at unlimited slope
• EPA Energy Star rating reassures significant energy savings
• Provides long lasting waterproofing protection
• Performs on all standard roofing substrates
• Reduces stress fatigue due to thermal cycling
• May be combined with I.R. reflecting basecoat to lower B.T.U. consumption
• Very fast setting to prevent wash -off
• Completely dry surface remains clean
• Performs on all standard roofing substrates
• Environmentally friendly (contains no solvents)
• Inhibits corrosion
• Can easily be recoated without use of primer
• Resists fungal attack
• Remains flexible, tough, and weatherproof in all climates
• Will not get brittle and crack with age
• Protects against UV deterioration
• Ten year material warranty
• May be recoated to extend the lifespan significantly
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
CAUTION! Read this entire data sheet before continuing. Surfaces must be dry, free of dirt, loose debris, oil, grease, or any substance that could interfere with bond. All repairs of damage or defects must be made prior to application. POLAROOF AC is an alkaline waterbased product. POLAROOF AC is applied straight out of the can after 2 minutes of gentle low speed mixing or stirring. Apply the product using brush, roller, or spray technique. Apply in 2 coats to a uniform wet film thickness of about 24 mils per coat to insure complete coverage on the 2nd coat. Apply the 2nd coat after the 1st coat has set (about 2-4 hours). For spray applications, use a 30:1 ratio Graco with a #36 tip or similar equipment. For soft brush or high nap roller application, use light pressure and coat in a cross direction to the 1st coat.
- Limitations
Do not apply to frozen or saturated surfaces. Do not apply if the temperature is predicted to drop below 45°F within 4 hours after application is completed. Do not apply if rain is forecast within 4 hours of completion of application. Protect POLAROOF AC from freezing. In roofing areas where water is likely to pond and be present for more than 1 day after precipitation, it is advisable to topcoat the POLAROOF AC with CLEARCOAT FP. Apply the CLEARCOAT in these areas at the rate of 1 gallon per 350 square feet.
- Maintenance
If a surface becomes dirty or stained, wash with a mild soapy water solution. If an area becomes nicked or cut, recoat with POLAROOF AC. Clean tools and equipment with water before the POLAROOF AC dries; after that solvent cleaning may be necessary.
Regulatory & Compliance
- Regulations
EPA: Complies with all existing regulations
Technical Details & Test Data
- Specifications
Coating: Acrylic elastomeric
Recommended Thickness: 32 dry mils
Coverage: Approximately 3 gallons per l00 square ft; 48 mils wet film thickness (WFT); 32 mils dry film thickness (DFT)
Safety & Health
- Precautions
Keep out of reach of children and pets.
Packaging & Availability
- Packaging
5 US gallons standard; also available 1 gallon pails and 55 gallon drums
Storage & Handling
- Shelf Life
2 years (unopened) from date of manufacture
- Pot Life
Not applicable (single component)