Products

Arma 901-90AS (800% Elongation) is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

ARMA 100 APU is a two component, polyurethane/polyurea elastomer system used for bedliners. This product provides a flexible but extremely tough monolithic membrane with excellent water and chemical resistance with a vast variety of other applications.

Arma 400 is two-component 100% solid cast urethane elastomer is recommended for high temperature applications where thermal stability is required. Often used for dump-truck beds, this product provides a hard, glossy surface necessary for smooth movement of cargo during tilt unloading.

Arma 60A polyurea/polyurethane hybrid is waterproof, soft and rubber-like. It is skid-resistant and provides an extremely tough monolithic membrane for flexible surfaces. This product exhibits excellent abrasion and chemical resistance and contains no VOCs.

Arma 103 is a low VOC aliphatic topcoat available to meet VOC regulations in specific areas. It is used in combination with Arma 101. It is used as a UV resistant topcoat for any of the Arma polyurea coatings, predominantly for RV roofs.

Arma 901-70DS is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Arma 901-50DS is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Arma 120 is a two-component, 100% solids polyurethane elastomer. It is equally effective under dry abrasive and/or corrosive environments. This product is potable water coating certified.

Arma 102 is a high solids, moisture-catalyzed, single-component polyurethane coating system. It consists of Arma101, an aromatic polyurethane basecoat, and ARMA 103, a UV-resistant, 100% aliphatic polyurethane topcoat. This product is effective as a protective membrane over polyurethane foam on new or existing roofs and hot or ambient storage tanks.