Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Processing Considerations
- BioBlend XD 22620 can be run on existing processing equipment.
- Under normal conditions, processing BioBlends may cause a slight odor and/or smoke. Always use proper ventilation. See the BioBlend® XD 22620 SDS for details.
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- BioBlend® XD 22620 is designed for blow molding applications that require stress crack resistance, rigidity, and high impact strength.
Properties
- Physical Form
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Flexural Properties
- Notes
- Calculated value is based on a 20% NuPlastiQ masterbatch.
- MFI is based on a 20% NuPlastiQ masterbatch. Please contact us if you have any questions about MFI values for diluted blends.
- These values are typical properties only and should not be used for specification purposes. End users should confirm results with their own tests. Mechanical properties were tested at a 20% NuPlastiQ concentration.
Value | Units | Test Method / Conditions | |
Tensile Break Strength | 12.5 | MPa | ASTM D638 |
Tensile Secant Modulus | 630 | MPa | ASTM D638 |
Value | Units | Test Method / Conditions | |
Density (1) | approx. 1.04 | g/cm3 | ASTM D792 |
Value | Units | Test Method / Conditions | |
Melting Temperature Range | 130 | °C | ASTM D3418 |
Melt Flow Index (2) | 1 | g/10 min (190 °C/10 kg) | ASTM D1238 |
Value | Units | Test Method / Conditions | |
Water Content | max. 0.5 | % | ASTM D6980 |
Value | Units | Test Method / Conditions | |
Flexural Modulus | 660 | MPa | ASTM D790 |
Ultimate Flexural Strength | 26 | MPa | ASTM D790 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage and Drying
- Pellets are shipped in sealed moisture-proof bags and are ready to be used as supplied. Until used, they should be stored in a sealed container away from heat.
- If pellets are exposed to a humid environment, they will absorb moisture. If needed, dry pellets by introducing warm, dry air at 60°C for 1-4 hours. Pellets should be < 0.5% moisture content prior to processing.
- BioLogiQ warrants the material for replacement value only, within 12 months of shipping date