ARC® S4+

Identification & Functionality

Product Type

Solventless & High Solids Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Protective Coatings

Composition

Matrix:

• A modified epoxy resin reacted with a modified cycloaliphatic amine curing agent

Reinforcement:

• Proprietary blend of surface modified mineral reinforcements

Features & Benefits

Labeling Claims

VOC-free

Ready-to-Use Product Features

Chemical Resistant,

Excellent Substrate Adhesion,

Good Adhesion,

Good Mechanical Properties,

Wear Resistant

Designed to

• Protect against extreme chemical attack in immersion.
• Provide extended wear resistance.
• Apply by brush, roller, airless or plural component spraying.

Features & Benefits

• Multi-functional chemistry
  • Resists concentrated chemicals
• High cross-link density
  • Permeation resistant
  • Improved thermal stability
  • Enhanced mechanical properties
• Spark testable per NACE SP0188
  • Easy post application inspection
  • Facilitates quality assurance
• High adhesive strength
  • No underfilm corrosion
• 100% solids; no VOCs; no free isocyanates
  • Enhances safe use

Applications & Uses

Markets

Paints & Coatings

Applications

Paints & Coatings — Industrial Coatings

Industrial Coatings

Application Area

Fan Shaft,

HVAC Ducts,

Tanks

Application Method

Brush,

Roller,

Spray

Application Areas

• Exhaust gas ductwork
• Chemical storage tanks
• Heat exchangers
• Fans and housings
• Chimneys & stacks
• Tank linings

Coverage

• Nominal based on DFT 375 μm 15 mil.
• Typically applied as 2-Coat System.
• 1125 ml cartridge covers 3.00 m2 32.30 ft2
• 5 liter kit covers 13.33 m2 143.52 ft2
• 16 liter kit covers 42.70 m2 459.30 ft2

Properties

Technical Data

	Value	Units	Test Method / Conditions
Cured Density	81.0	lb/cu.ft.	-
Flexural Strength	4000.0	psi	ASTM D 790
Pull-Off Adhesion	4700.0	psi	ASTM D 4541
Tensile Strength	3500.0	psi	ASTM D 638
Tensile Elongation	7.0	%	ASTM D 638
Flexural Modulus	2.5 X 10E+5	psi	ASTMD 790
Hardness	83.0	Shore D	ASTMD 2240 (Durometer)
Vertical Sag Resistance (70°F, 250µm)	No Sag	-	-
Maximum Temperature (Wet Service)	140.0	°F	-
Maximum Temperature (Dry Service)	300.0	°F	-
Maximum Temperature (Post Cure Wet Service)	203.0	°F	-

Packaging & Availability

Packaging

• 1125 ml
• 5 liter
• 16 liter
• Each kit includes mixing and application instructions.
• 5 liter kit includes tools.

Storage & Handling

Shelf Life

• 2 years.
• Unopened containers.
• Stored between 10°C (50°F) and 32°C (90°F) in dry, covered facility.