Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Requisits For Application
- The foundations to receive the floor covering must be flat and with a smooth surface, suitable for obtaining a continuous adhesive film of the adhesive compatible with the nature of the covering to be installed and must be clean, free of loose granules. or dust (plaster, oils, paints, etc.) to ensure good adhesion.
- The foundations must also, in accordance with DIN 18365:
- Resist without deformation, cracking or rupture to loads arising from normal conditions of use, capable of affecting both the coating and the respective bonding plane.
- Present absorption that guarantees good adhesion of the smoothing masses or glues.
- The maximum permissible moisture content is 2.5%, and they are not likely to expose the coating to the action of moisture in any way.
- Application Method
Foam Roller Application.
- Ensure that surfaces are free from any surface treatment or contamination that affects the adhesiveness of this product. Shake the product and without diluting, apply over the entire surface to be treated in order to obtain a uniform film without puddles.
- Allow to dry completely before installing the leveling compound.
For applications other than those mentioned above, it is recommended to carry out a previous test and consult CIPADE's technical services.
Properties
- Color
- Physical Form
- Characteristics
Value | Units | Test Method / Conditions | |
Viscosity (Brookfield RVTD-Spindle 4, 20 rpm, 20°C) | 100 - 150 | cPs | ME 006 |
Solids Content | 25 - 29 | % | ME 007 |
Density | 1.00 - 1.10 | g/cm³ | ME 009 |
pH | 3 - 5 | — | ME 018 |
Drying Time | min. 6 | hrs | — |
Yield | 100 | g/m² | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 1 Year
- Storage Information
This product must be stored in a well-ventilated place, in its original packaging, well closed, protected from moisture and sunlight, and at temperatures between 15ºC and 25ºC. Under these conditions the product is valid for 1 year.