Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Additives
- PLA thinner
- PLB fast thinner
- PLD retardant
- PLH catalyst
Features & Benefits
- Ready-to-Use Product Features
- Features
This is Acrylic based ink. Mono and bicomponent ink, bright appearance and very fast drying. Suitable for printing high-quality products or those requiring high strength. Excellent adhesion and resistance to rubbing, to scratching and stacking, alcohol and gasoline, which improve when used with the catalyst, such as bicomponent. Non-toxic ink (NT) in compliance with European standard EN 71/part 3 and the European Directive 2011/65 / EC (RoHS 2). Excellent light fastness.
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Processing
PROCESSING
To increase the mechanical and chemical resistance or adherence to the support, the ink can be used as a two-component ink by adding the special PLH catalyst in a 10:1 ratio (10 parts ink and 1 part catalyst). Mix and strongly dilute the ink by using the PLA thinner in the measure of max. 10-20%. When printing fine details or screened images (e.g. 80/120 lines per cm^2) in warm environments, we recommend you add the PLD retardant in a minimum percentage.CAUTION!
The catalyzed ink must be consumed within 6-8 hours or afterwards it gradually loses its mechanical-chemical resistance and its ability to adhere to the support. For uniform production quality it is advisable to renew the ink approximately every 4/8 hours of work. Excessive dilution generates a loss of the covering power, smudges and an imperfect detachment of the ink from the pad. An insufficient dilution causes problems of drawing the ink from the cliché, printing repeatability and dripping of the ink with a consequent decline of the printing quality.
DRYING AND HARDENING
Fast drying, which increases with the addition of the catalyst. If you would like it to dry in only a few time, you can use hot air circulation ovens (60-80°C) or high temperature spot devices (air or infrared rays) that can be installed on the piece feeding systems (e.g. rotary tables, conveyors, etc.). The ink is completely hardened after 24-48 hours. Pot life ink catalyzed: 8-10 hours at room temperature (about 20°C). Working temperature at least 15°C.
Packaging & Availability
- Colour Range
Consult the COMEC ITALIA color chart. All of the color shades can be mixed with each other. Upon request:
- special sample colors
- metallic gold and silver shades ready for use;
Storage & Handling
- Preservation
- Lifetime about 3,5 years(2,5 if metallic).
- Conditions for preservation: the package must be sealed tight and put in a dry and cool space.