Products

PS111 is a proprietary water based ready-to-use silicate treatment that is applied to uncolored and unsealed freshly placed interior or exterior concrete. It is not film forming and penetrates deeply into the pores and capillaries of the top layer of a surface. The PS111 chemically reacts with calcium hydroxide within matrix of structure of concrete to form added Calcium Silicate Hydrate (CSH) which is the main binder in concrete. This technology helps with the proper curing and hydration of concrete by reducing rapid water evaporation while retaining breathability. The PS111 is easier, more efficient, and less costly to apply than traditional curing agents or methods and also becomes a permanent part of the concrete itself. It does not interfere with the subsequent application of penetrating sealers, the bonding of topical coatings, or the adhesion of glues or mastics used in floor coverings. It is an ideal treatment for smooth troweled or broom finished concrete surfaces. The PS111 also improves the hardness, strength, abrasion and wear resistance, long term durability, and overall integrity of a treated surface. It reduces dusting not caused by actual surface defects, provides long term protection against wear and traffic, and lowers the overall maintenance of a surface. The PS111 is environmentally friendly, VOC compliant, non-flammable, non yellowing, and odorless. It is breathable with minimal impact to traction coefficient. PS111 has a clear appearance. Upon proper application, the substrate will have little, or no, noticeable change in appearance when dry.

PS102 is a chemically reactive deep penetrating siliconate sealer that is intended for unsealed and uncolored rough concrete and masonry. It creates a cross-linked insoluble methyl-silicone internal membrane that fuses within porous substrates of broom finished concrete and concrete block to combat freeze/thaw damage, reduce scaling and spalling, impart water repellence, and restrict moisture absorption. It also limits harmful effects of deicing chemicals and salts, acid rain deterioration, alkali attack, corrosion of reinforcing steel, and UV damage. PS102 decreases efflorescence and dusting, limits dirt build up, retards mold and mildew, and makes easier to clean and maintain. PS102 is breathable with minimal impact to traction coefficient. PS102 also contains film forming polymers for enhanced curing of broom finished concrete by allowing the slow release of moisture during the curing process while maintaining excellent breathability. The film forming polymers also provide superior freeze/ thaw protection in harsh climates. It is also UV resistant and nonyellowing. PS102 has a light milky appearance. Upon proper application, the substrate will have little, or no, noticeable change in appearance when dry.