Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features And Benefits
Quick dry time, fast recoat, high gloss finish, hard durable finish,, excellent abrasion resistant, chemical resistant, tintable, high build, application, suitable for direct to metal application.,,/p>
- Tint And Base Information
White, Black and Clear and Tinted Base to a variety of colors,,/p>
Applications & Uses
- Applications
- Application Area
- General Surface Preparation
The surface to be coated must be dry, clean and free of oil, grease,, release agents curing compounds and foreign material. Remove all, rust mill scale and loose paint before application. Steel: For best, appearance, the primer or undercoat should be smooth and free of, any surface defects. Prime using epoxy-based primer. For galvanized, steel: Remove dirt and oil by using a solvent cleaner and rinse. Prime, with a suitable primer before applying urethane coating. For direct to, metal use, blast with abrasive to SSPC-SP7 and prime with a suitable, primer.,,/p>
- Limitations Of Use
Apply only when ambient and surface temperatures are above 5, degrees Celsius. For professional use only. Immediately after use place, rags, steel wool and waste soaked with the product in a water filled, metal container.,,/p>
- Coverage
Theroretical : Approx. 680 sqft / gal at 1mil DFT
- Recommended Use
For use on truck fleets, railcars, vans, boats, properly prepared, steel, storage tank exteriors, motors, machinery and other, transportation vehicles.,/p>
- Mix Ratio
6 parts of Part A : 1 part of Part B ( By volume ) Data below based on potted mix.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Gloss (at 60°) | min. 90 | - | - |
| VOC | 470.0 | g/l | - |
| DFT ( recommended) | 4 - 6 | mil | - |
| Weight-Volume | approx. 1.2 | kg/ litre | - |
| Solids By Volume | approx. 43 | % | - |
| Solids By Weight | approx. 58 | % | - |
| Drying Time (25°C, Dust free) | 30.0 | minutes | - |
| Drying Time (25°C,To Touch ) | 30.0 | hours | - |
| Clean up | Clean with thinners (85-0337) | - | - |
| Drying Time (25°C, Recoat) | 3.0 | hours | - |
| Drying Time (25°C, Hard Dry) | 5.0 | hours | - |
Safety & Health
- Safety
Proper safety procedures should be followed at all times while, handling this product. In confined areas, personal protection, equipment and explosion proof application equipment should be, used. Keep containers away from heat, flame or sparks when not in, use. Use with adequate ventilation. Keep from the reach of children., Read all label directions and Safety Data Sheet for health and safety, information prior to use.,,/p>
Packaging & Availability
- Packaging
3.7 L Can, 18.9 L Pail,,/p>