Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Markets
- Application Method
- Coating Type
- Processing
- Designed to run on wire-round rod coaters, but can be modified to run on Air Knife, Flexo, Gra- vure, Curtain, and Size-press applicators
- For high barrier applications, the coating is recommended to be applied using a “double-bump”. The first-down-layer should be cured prior to hitting wiht the
- The coating must reach 135-140 °C (280-290 °F) for film formation. On bench scale, oven temperatures of 170°C (40-45 seconds) are required to achieve cure
- Processing
- Designed to run on wire-round rod coaters, but can be modified to run on Air Knife, Flexo, Gra- vure, Curtain, and Size-press applicators
- For high barrier applications, the coating is recommended to be applied using a “double-bump”. The first-down-layer should be cured prior to hitting wiht the
- The coating must reach 135-140 °C (280-290 °F) for film formation. On bench scale, oven temperatures of 170°C (40-45 seconds) are required to achieve cure
Properties
- Physical Form
- Appearance
- Transparent glossy upon cure
- Typical Properties
- Note
These values are to be considered as typical values and are not to be construed as specifications.
- Note
These values are to be considered as typical values and are not to be construed as specifications.
- Coated Board Properties
Board Type 18pt SBS LW Unbleached Kraft
Coat wt (g/m2) 18 18 Cobb (g/m2) (30-min)<5 (30-min) <5 3M Kit (#) 5 5 - Coated Board Properties
Board Type 18pt SBS LW Unbleached Kraft
Coat wt (g/m2) 18 18 Cobb (g/m2) (30-min)<5 (30-min) <5 3M Kit (#) 5 5
| Value | Units | Test Method / Conditions | |
| Solid Content | 45.0 | % | — |
| Food Contact Status | max. 18 | g/m² | — |
| Density | 9.2 | lb/gal | — |
| Brookfield Viscosity (#2 spindle, 100 rpm, 22°C) | 100 - 130 | Brookfield Viscometer | — |
| pH | 6.5 - 7.5 | — | — |
Regulatory & Compliance
- Certifications & Regulatory Status
Certifications apply to the resin only. Customer required to certify their own parts to make claims about renewability and biodegradability.
- Certifications & Regulatory Status
Certifications apply to the resin only. Customer required to certify their own parts to make claims about renewability and biodegradability.