Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Composition & Characteristics:
- This product is manufactured from carefully selected base stocks to meet the most critical industrial and commercial requirements.
- The polarity of this excellent grease provides greater metal adhesion and protection from corrosive atmospheres including strong acids and alkalies.
- The product will not melt and run even at high operating temperatures.
- The unique combination of high viscosity index paraffinic base stocks, modifiers and improvers, coupled with an inorganic gelling agent, enables the grease to be pumped equally well in low or high temperatures.
- Features
- Excellent outdoor resistance, extreme pressure, high heat resistance and water-resistant.
- Exceptional resistance to acid, water, salt spray, weather, dirt, dust, steam, and oxidation.
- Seals out dust-dirt-contaminants, prolongs the life of metal parts.
- Exceptional adhesive-cohesive and anti-wear properties.
- Gives extra “cushioning” that reduces shock and noise.
- Performs at a wide variety of temperatures.
- High shock and impact resistance.
- No pound out or thin out.
- Contains special corrosion and rust inhibitors.
Applications & Uses
- Markets
- Application Method
- Uses
- As an all-purpose grease.
- This product not only lubricates better but because of its tenacious film strength, will last longer and require less replacement and less frequent lubrication.
- This product has an extremely wide range of applications.
Here Are a Few:
- Ball & Roller Bearings
- Disk Brakes
- Sleeve Bearings
- Fifth Wheels
- Wheel Bearings
- King Pins
Properties
- Color
- Physical Form
- Odor
- Solvent
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Penetration | 60.0 | Strokes | ASTM 265 - 295 |
| NLGI Number | 2.0 | - | - |
| Grease Leakage | 0.3 | - | ASTM-D 1263-61 (Wheel Bearing Test) |
| Condition | Excellent | - | ASTM-D 1263-61 (Wheel Bearing Test) |
| Ford Wheel Bearing Test | Pass | - | - |
| Dropping Point | Non Melt | - | ASTM |
| Performance of Extreme Pressure | 65.0 | - | Timken E.P. Test Load |
| Water Resistance | Excellent | - | - |
| Acid Resistance | Excellent | - | - |
| Base Oil Viscosity (100°F) | 600.0 | SUS | - |
| Base Oil Viscosity (210°F) | 68.7 | SUS | - |
| Viscosity Index | 96.0 | - | - |
Safety & Health
- Cautions
- Do not ingest.
- If this should occur, drink large volumes of water and seek medical attention.
- Avoid storage of products in freezing temperatures.
- Keep container sealed when not In use.
- Rinse empty containers before discarding them in an authorized landfill site.
- Keep Out of reach of children.
Packaging & Availability
- Packing
Net contents 45 lbs (20.4 kgs)